Call Now to Save! 1-800-523-3353

Anti Roll Bar Kits


1 1/8" diameter x 17" long splined 4340 steel torsional shaft (not a piece of chrome moly tubing) anti roll bars for S&W rear frames 10-507 as well as any other frame or application where a 18.5" long bar will fit best. Kit has 6" long, 1" wide splined aluminum arms, 1-5/8" x 36" upper cross-member, 1-1/2" x .095 support tube with bronze  ...
Our Price: $430.95
Ask a Question
1 1/8" diameter x 18 1/2" long splined 4340 steel torsional shaft (not a piece of chrome moly tubing) anti roll bars for S&W rear frames 10-400, 10-508 10-510-24 & 10-511-24 as well as any other frame or application where a 18.5" long bar will fit best. Kit has 6" long, 1" wide splined aluminum arms, 1-5/8" x 36" upper cross-member, 1-1/2" x .095 ...
Our Price: $430.95
Ask a Question
INCLUDES 4340 TORSION BAR 18-1/2" x 1-1/8", TORSION HOUSING TUBE, BUSHINGSAND TORSION ARMS
Our Price: $430.95
Ask a Question
INCLUDES 21" 4340  1 1/8" DIA. TORSION BAR, HOUSING TUBE WITH BUSHINGS9" ALUM. ARMS
Our Price: $430.95
Ask a Question
1-1/8" diameter anti roll bar kit - splined 4340 steel torsion shaft (not a piece of tubing as used by some of our competitors)with 6" long 1" wide splined billet aluminum arms, 7/16" & 3/8" rod ends for 7/8 x .058 link tubes that mount to S&W P-5 4-link housing brackets only, this kit does not contain any rear housing mounts. 36" 1 5/8" x ...
Our Price: $436.95
Ask a Question
1 1/8"" diameter x 21" long anti roll bars for S&W rear frames 10-401, 10-510-26 & 10-511-26 as well as any other frame or application where a 21" long bar will fit best. Kit has 6" aluminum arms By equalizing traction & preventing body roll, anti-roll or rear torsion bars, as they are sometimes called, have been shown to produce consistently ...
Our Price: $430.95
Ask a Question
1 1/8" diameter x 23" long splined 4340 steel torsional shaft (not a piece of chrome moly tubing) anti roll bars for S&W rear frames 10-402,10-510-28 & 10-511-28 as well as any other frame or application where a 18.5" long bar will fit best. Kit has 6" long, 1" wide splined aluminum arms, 1-5/8" x 36" upper cross-member, 1-1/2" x .095 support ...
Our Price: $430.95
Ask a Question
1-1/8" diameter x 29" long anti roll bar kitBy equalizing traction & preventing body roll, anti-roll or rear torsion bars, as they are sometimes called, have been shown to  produce consistently quicker 60' times.   This new kit uses only the highest quality components -a solid, splined 4130 steel torsion shaft (not a piece of tubing as used by ...
Our Price: $419.95
Ask a Question
Great for Stock Eliminator, Top Stock, and E.T. Bracket classes.  S&W's Camaro anti roll bar kit stops body roll and improves 60' times.  Fits under stock floor pan.  Does not fit with stock gas tank - fuel cell required for installation.  Welding required.
Our Price: $551.95
Ask a Question
2005-2014 Mustang Bolt on Anti Roll Bar Kit, S&W's new Mustang anti roll bar uses two top axle tube brackets that weld to the axle tubes allowing the rest of the kit to be bolted in place, making it acceptable for classes where welding to the chassis is not allowed. Kit includes all necessary brackets & hardware, splined aluminum arms and a 4340 ...
Our Price: $551.95
Ask a Question
2005-2014 Mustang Bolt on Anti Roll Bar Kit For uses with S&W Fab Rear Housing, S&W's new Mustang anti roll bar for use with S&W Fab Rear Housings # 45-447FAB & 45-448FAB.  . Kit includes all necessary brackets & hardware, splined aluminum arms and a 4340 splined torsion bar (not a piece of moly tubing like many of our competitors).
Our Price: $479.95
Ask a Question
1 1/8" diameter x  Custom Length up to 29". Additional $10. 00 per inch beyond 29".   By equalizing traction & preventing body roll, anti-roll or rear torsion bars, as they are sometimes called, have been shown to produce consistently quicker 60' times. This new kit uses only the highest quality components -a splined 4340 steel torsion shaft (not ...
Our Price: $450.95
Ask a Question
TORSION ARM 1" THICK, FOR 7/8 SPLINED TORSION BAR CENTER OF TORSION BAR TO ROD END CENTER = 8 1/2" AND 9 1/2". USED IN KITS 40-000, 40-001, 40-002, 40-007
Our Price: $44.95
Ask a Question
9" TORSION BAR ARM FOR 1 1/8" SPLINE BAR, 1" THICK 6061-T6 ALUMINUM, SPLINE FOR 1 1/8 TORSION BAR9" CENTER TO CENTER, TORSION BAR CENTER TO ROD END CENTER
Our Price: $48.95
Ask a Question
6" TORSION BAR ARM FOR 1 1/8" SPLINE BAR, 1" THICK 6061-T6 ALUMINUM, SPLINE FOR 1 1/8 TORSION BAR6" CENTER TO CENTER, TORSION BAR CENTER TO ROD END CENTER
Our Price: $49.95
Ask a Question
1 1/8" O.D. TORSION BAR, 4340 CHROME MOLY BAR, SPLINE FOR 1" THICK TORSION ARM. AVAILABLE IN STANDARD LENGTHS AND CUSTOM LENGTHS. CALL FOR CUSTOM LENGTH PRICING, USES 9" ARMS #40-014 OR 6" ARMS #40-015
Our Price: $143.30
Ask a Question
BUSHING - TORSION BAR (NYLATRON, BLACK)- FITS 7/8" BAR IN 1-1/2 X 095 TUBE, SOLD EACH
Our Price: $6.95
Ask a Question
BRONZE BUSHING - TORSION BAR FITS 1 1/8 DIAMETER BAR IN 1-1/2 X 095 TUBE 
Our Price: $8.50
Ask a Question

Positive SSL on a transparent background