Call Now to Save! 1-800-523-3353

Door Car


79-93 MUSTANG RACK AND PINION15-1/2" CENTER - CENTER OF RACK MOUNTS FLAMING RIVER RACK #1503 
Our Price: $291.95
Ask a Question
74-78 MUSTANG II MANUAL RACK & PINION, STANDARD WIDTH, 16" CENTER TO CENTER ON RACK MOUNTS 4.15 TURNS LOCK TO LOCK RACK TRAVEL 5.25" PIVOTS = 24-1/2" CENTER TO CENTER FLAMING RIVER #1502 MANUAL RACK ,  USED IN 36-400PACKAGE
Our Price: $275.95
Ask a Question
74-78 MUSTANG II MAN RACK/PINION 3" MORE NARROW THAN STOCK,            13" CENTER TO CENTER ON RACK MOUNTS 4.15 TURNS LOCK TO LOCK RACK TRAVEL 5.25"PIVOTS= 21.5 CENTER TO CENTER FLAMING RIVER RACK #1502-3X3 MANUAL RACK OVERALL LENGTH IS 42" , USED IN 36-400-3PACKAGE  
Our Price: $583.95
Ask a Question
DIRECT REPLACEMENT 71-72 PINTO 45 1/2" OVERALL WIDTH 1/2"X20 THREADED ENDS USES 35-378F, 35-375, 35-375N STEERING U-JOINT  USES 36-006 RACK MOUNTING KIT FLAMING RIVER RACK #1501
Our Price: $277.95
Ask a Question
MUSTANG II POWER RACK & PINION POWER RACK AND PINION FOR MUSTANG II 6 INCHES OF TRAVEL FOR FULL TURNING RADIUS APPROXIMATELY 12 LBS LIGHTER THEN OEM RACK 1" DIAMETER RACK SHAFTKIT INCLUDES PUMP AND ALUM PULLEY. NOTE: V-BELT, HOSES , U-JOUNTS AND RESERVOIR ARE NOT INCLUDEDFLAMING RIVER RACK # 40001-V
Our Price: $983.95
Ask a Question
S10 RACK AND PINION STEERING CONVERSION KIT 1983-2002.S-10 STEERING KIT CONVERTION INCLUDES :Custom Narrowed Pinto Style Manual Rack, Bump Steer Kit, Rack Clamp and Rack Mount Plate, Steering Shaft and Shaft Brace, 3 Chrome-Moly U-Joints, Welding Required, saves 35 lbs. over the original steering Click Here for installation instructions 
Our Price: $650.00
Ask a Question
RACK AND PINION STEERING CONVERSION KIT CAMARO 1970 - 1981.S-10 STEERING KIT CONVERTION INCLUDES :Custom Narrowed Pinto Style Manual Rack, Bump Steer Kit, Rack Clamp and Rack Mount Plate, Steering Shaft and Shaft Brace, 3 Chrome-Moly U-Joints, Welding Required, saves 35 lbs. over the original steering CLICK HERE for Instructions 
Our Price: $650.00
Ask a Question
FLAMING RIVER STEERING RACK MUSTANG II 6 INCHES NARROWER THAN STOCK4.15 TURNS LOCK TO LOCKRACK TRAVEL 5.25"PIVOTS = 18-1/2" CENTER TO CENTERFLAMING RIVER #1502-6X6 
Our Price: $587.95
Ask a Question
 71-72 PINTO 40 1/2" OVERALL WIDTH. 5" NARROWER THAN STOCK 1/2"X20 THREADED ENDS USES 35-378F, 35-375, 35-375N STEERING U-JOINT  USES 36-006 RACK MOUNTING KIT FLAMING RIVER RACK #FR1501-2 
Our Price: $389.95
Ask a Question
FLAMING RIVER # FR1501-2X2 PINTO RACK 2" SHORTER THAN STOCK 
Our Price: $382.05
Ask a Question
DROP SPINDLES 2" FITS S-10 BLAZER
Our Price: $282.00
Ask a Question
1964 - 1972 GM A-BODY, CHEVELLE, CUTLASS, SKYLARK, GTOKIT INCLUDES BUMP STEER KIT RACK CLAMP AND RACK MOUNT PLATE 3 CHROME MOLY U JOINTS STEERING SHAFT AND SHAFT BRACE BILLET ALUM STEERING ARMS CUSTOM NARROWED PINTO STYLE MANUAL RACK WELD IN RACK!!!!
Our Price: $840.00
Ask a Question
MANUAL RACK AND PINION CONVERSION KIT 1978-1988 G-BODY
Our Price: $650.00
Ask a Question
 Steel U-Joint 3/4"-36 spline x 3/4" smooth bore Borgeson #013464Recommended for street use
Our Price: $82.88
Ask a Question
[1] LEFT SIDE, [1] RIGHT SIDE BRACKETTO MOUNT ON 1 1/2" TUBING / 4 3/8" OVER ALL LENGTH,                                         USED IN PINTO A-ARM SUSPENSION CROSSMEMBER
Our Price: $23.95
Ask a Question
2 3/8" LONGER THAN STANDARD.  6 3/4" OVER ALL LENGTH
Our Price: $23.95
Ask a Question
CONVERTS REAR STEER OEM BOX TO FRONT STEER RACK & PINIONREMOVAL OF STOCK LOWER CONTROL ARM CROSSMEMBERS REQUIREDREPLACEMENT TUBULAR CROSSMEMBERS INCLUDED. CROSSMEMBERUNDER ENGINE IS REMOVABLE.ALSO INCLUDES: RACK & PINION MOUNTING BRACKET, BILLET ALUMINUM PINTO RACK MOUNT CLAMP, TIE RODS, DIAGONAL BRACES & GUSSETS, CROSSMEMBER CAP OFF PLATES WITH ...
Our Price: $305.95
Ask a Question
82-93 S-10 INTERMEDIATE STEERING SHAFT CONVERSION KIT, REPLACES BOTH RAG JOINTS AND FACTORY INTERMEDIATE SHAFT
Our Price: $220.95
Ask a Question
RACK MOUNT CLAMP - BILLET ALUM, PINTO RACK & PINION, CLAMPS TO RIGHT SIDE OF PINTO TYPE R&P TUBE1" THICK BILLET ALUMINUM CLAMPINCLUDES 2-Pc ALUMINUM CLAMP, SOCKET HEAD SCREWS & NYLOCKS1-3/8" HOLE FOR RACK & PINION BODY, (2) 7/16 BOLTS ON 2-7/8" CENTERS
Our Price: $57.95
Ask a Question
EVERYTHING REQUIRED TO MOUNT RACK TO CROSSMEMBER , USED IN 36-400PACKAGE & 36-400-3PACKAGE
Our Price: $36.95
Ask a Question

Positive SSL on a transparent background