Call Now to Save! 1-800-523-3353

S10 Truck Performance Parts


 Click Image to watch TRUCKS TV Haulin' S-10 Part 1 - Featuring S&W Race Cars Four link tubes and hardware, welded rear frame section, wheel tubs. 

1982-1993 S-10 2 DOOR EXT CAB REAR WINDOW HARWOOD #41921
Our Price: $153.99
Ask a Question
The S & W Race Cars fully-welded Chevy S-10 rear frame kit is designed specifically for the do-it-yourselfer. Each frame is completely jig-welded to assure straightness and proper alignment of suspension mounting points. Each frame is constructed of heavy duty .120 wall rectangular tubing and is designed to fit under the stock bed floor and retain ...
Our Price: $1,680.80
Ask a Question
The S & W Race Cars fully-welded Chevy S-10 rear frame (BARE FRAME ONLY). Kit is designed specifically for the do-it-yourselfer. Each frame is completely jig-welded to assure straightness and proper alignment of suspension mounting points. Each frame is constructed of heavy duty .120 wall rectangular tubing and is designed to fit under the stock ...
Our Price: $1,009.95
Ask a Question
The S & W Race Cars fully-welded Chevy S-10 rear frame kit is designed specifically for the do-it-yourselfer. Each frame is completely jig-welded to assure straightness and proper alignment of suspension mounting points. Each frame is constructed of heavy duty .120 wall rectangular tubing and is designed to fit under the stock bed floor and retain ...
Our Price: $1,940.75
Ask a Question
The S & W Race Cars fully-welded Chevy S-10 rear frame (Bare Frame Only) is designed specifically for the do-it-yourselfer. Each frame is completely jig-welded to assure straightness and proper alignment of suspension mounting points. Each frame is constructed of heavy duty .120 wall rectangular tubing and is designed to fit under the stock bed ...
Our Price: $1,049.95
Ask a Question
The S&W Race Cars fully-welded short bed C-1500 Chevy Pickup rear frame kit is designed specifically for the do-it-yourselfer. Each frame is completely jig-welded to assure straightness and proper alignment of suspension mounting points. All frames are constructed of heavy duty .120 wall rectangular tubing and are designed to fit under the stock ...
Our Price: $1,768.80
Ask a Question
S10 94 - 02 MARGUARD REAR WINDOW KIT. CLEAR  1/8" "MARGUARD" (CM2 POLYCARBONATE) WINDOW CUT TO FITINCLUDES (2) ALUM BACK BAR SEAL PLATES & HARDWARE, TINTED WINDOW 1/8" "LEXAN" CUSTOMER REQUIRED TO CUT BACK BAR SLOTS & DRILL MOUNTING HOLES
Our Price: $110.95   Now: $100.95
Ask a Question
1982-1993 S-10 LEXAN MARGARD 3/16 WINDSHIELD BY HARWOOD PART # 41914
Our Price: $285.00
Ask a Question
S10 RACK AND PINION STEERING CONVERSION KIT 1983-2002.S-10 STEERING KIT CONVERTION INCLUDES :Custom Narrowed Pinto Style Manual Rack, Bump Steer Kit, Rack Clamp and Rack Mount Plate, Steering Shaft and Shaft Brace, 3 Chrome-Moly U-Joints, Welding Required, saves 35 lbs. over the original steering Click Here for installation instructions 
Our Price: $650.00
Ask a Question
82-93 S-10 INTERMEDIATE STEERING SHAFT CONVERSION KIT, REPLACES BOTH RAG JOINTS AND FACTORY INTERMEDIATE SHAFT
Our Price: $220.95
Ask a Question
Spoiler made from .050 aluminum, comes with all necessary hardware and 2 spoiler support rods. Spoiler is 54 wide and extends 14" off the back of the truck"  spill plates are 3" x 14"
Our Price: $276.95
Ask a Question
Spoiler made from .050 aluminum, comes with all necessary hardware and 2 spoiler support rods. Spoiler is 53-1/2" wide and extends 14" off the back of the truck"  spill plates are 3" x 14"
Our Price: $276.95
Ask a Question
1 1/8" diameter x 18 1/2" long splined 4340 steel torsional shaft (not a piece of chrome moly tubing) anti roll bars for S&W rear frames 10-400, 10-508 10-510-24 & 10-511-24 as well as any other frame or application where a 18.5" long bar will fit best. Kit has 6" long, 1" wide splined aluminum arms, 1-5/8" x 36" upper cross-member, 1-1/2" x .095 ...
Our Price: $430.95
Ask a Question
S10 Chevy Pick-Up  1982-19938-POINT ROLL BAR, NHRA & IHRAAPPROVED Available in 1-3/4" x .134" EWS mild steel wall tubing or 1-3/4" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel minimum ...
Our Price: $225.95
Ask a Question
S10 Blazer 1982-1993,8-POINT ROLL BAR, NHRA & IHRAAPPROVED Available in 1-3/4" x .134" EWS mild steel wall tubing or 1-3/4" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel minimum spec.  Photo ...
Our Price: $250.95
Ask a Question
S10 1994-2004 Chevy Pick-up,8-POINT ROLL BAR, NHRA & IHRAAPPROVED Available in 1-3/4" x .134" EWS mild steel wall tubing or 1-3/4" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel minimum ...
Our Price: $250.95
Ask a Question
1994-2002 CHEVY BLAZER 8-POINT ROLL BAR,8-POINT ROLL BAR, NHRA & IHRAAPPROVED Available in 1-3/4" x .134" EWS mild steel wall tubing or 1-3/4" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel ...
Our Price: $250.95
Ask a Question
1982-1993 S-10 Pick Up STANDARD CAB10-POINT ROLL CAGE Available in 1-5/8 x .134" EWS mild steel wall tubing or 1-5/8" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing. Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel minimum spec.  Photo is for ...
Our Price: $350.95
Ask a Question
1982-1993 S-10 PICKUP EXTENDED CAB10-POINT ROLL CAGE Available in 1-5/8 x .134" EWS mild steel wall tubing or 1-5/8" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing. Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel minimum spec.  Photo is for ...
Our Price: $355.95
Ask a Question
S-10 BLAZER 1982-199310-POINT ROLL CAGE Available in 1-5/8 x .134" EWS mild steel wall tubing or 1-5/8" x .083 Chrome Moly wall tubing or 1-3/4" x .120 wall DOM mild steel tubing. Do not recommend .120" wall DOM tubing for drag racing applications since .120" wall is too close to .118" wall mild steel minimum spec.  Photo is for clarification ...
Our Price: $355.95
Ask a Question

Positive SSL on a transparent background