Back Half Kits
Back Half Kits Categories
Back Half Kits
Showing 1–24 of 109 results
-
Chrome Moly
22″ CM Ladder Bar Frame Kit For 28″ Ladder Bars
 Part# 10-350CM-KIT
22″ Fully, welded round tube 1-5/8″ x .083 chromoly ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions (note: instructions for 32″ ladders shown)
Kit includes:
Welded rear frame
28″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-350CM-KIT -
S&W Made Parts, Chrome Moly
22″ CM Ladder Bar Rear Frame For 28″ Ladder Bars
 Part# 10-350CM
22″ Fully, welded round tube 1-5/8″ x ..083 wall chromoly ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable.
SKU: 10-350CM -
Chrome Moly
22″ CM Pro 500 4-Link Round Tube Frame Kit
Part# 10-431CM-22KIT
22″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .083 wall chromoly tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
Base kit contains:
Welded rear frame
Upgraded 4-link tubes
FK chromoly rod ends with hardware
QA1 single adjustable shocks with springs
Lower shock mounts
4-link rear housing brackets
Welded wishbone kit
SKU: 10-431CM-22KIT -
Mild Steel
22″ MS Ladder Bar Frame Kit For 28″ Ladder Bars
 Part# 10-350MS-KIT
22″ Fully, welded round tube 1-5/8″ x .134 wall mild steel ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions ( instructions show 32″ ladder bar kit)
Kit includes:
Welded rear frame
28″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-350MS-KIT -
S&W Made Parts, Mild Steel
22″ MS Ladder Bar Rear Frame For 28″ Ladder Bars
 Part# 10-350MS
22″ Fully, welded round tube 1-5/8″ x .134 wall mild steel ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable.
SKU: 10-350MS -
Mild Steel
22″ MS Pro 500 4-Link Round Tube Frame Kit
Part# 10-431-22KIT
22″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .134 wall mild steel tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
Base kit contains:
Welded rear frame
Upgraded 4-link tubes
FK chromoly rod ends with hardware
QA1 single adjustable shocks with springs
Lower shock mounts
4-link rear housing brackets
Welded wishbone kit
SKU: 10-431-22KIT -
S&W Made Parts, Mild Steel
22″ P5 4-Link Mild Steel Round Tube Welded Frame With 210 Adjustments
Part# 10-431-22
22″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .134 wall mild steel tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
P-5 frame general configuration
SKU: 10-431-22 -
S&W Made Parts, Chrome Moly
22″ Pro 500 4-Link CM Welded Rear Frame
Part# 10-431CM-22
22″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .083 wall chromoly tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
P-5 frame general configuration
SKU: 10-431CM-22 -
Chrome Moly
24″ CM Ladder Bar Frame Kit For 28″ Ladder Bars
 Part# 10-351CM-KIT
24″ Fully, welded round tube 1-5/8″ x .083 chromoly ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions (note: 32″ ladders shown)
Kit includes:
Welded rear frame
28″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-351CM-KIT -
Chrome Moly
24″ CM Ladder Bar Frame Kit For 32″ Ladder Bars
 Part# 10-330CM-KIT
24″ Fully, welded round tube 1-5/8″ x .083 chromoly ladder bar rear frame, packages designed specifically for applications that need a 32 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions
Kit includes:
Welded rear frame
32″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-330CM-KIT -
S&W Made Parts, Chrome Moly
24″ CM Ladder Bar Rear Frame For 28″ Ladder Bars
 Part# 10-351CM
24″ Fully, welded round tube 1-5/8″ x ..083 wall chromoly ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable.
SKU: 10-351CM -
Chrome Moly
24″ CM Pro 500 4-Link Round Tube Frame Kit
Part# 10-431CM-24KIT
24″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .083 wall chromoly tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
Base kit contains:
Welded rear frame
Upgraded 4-link tubes
FK chromoly rod ends with hardware
QA1 single adjustable shocks with springs
Lower shock mounts
4-link rear housing brackets
Welded wishbone kit
SKU: 10-431CM-24KIT -
S&W Made Parts, Chrome Moly
24″ CM Round Tube Ladder Bar Rear Frame
 Part# 10-330CM
24″ Fully, welded round tube 1-5/8″ x ..083 wall chromoly ladder bar rear frame, packages designed specifically for applications that need a 32 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable.
SKU: 10-330CM -
Mild Steel
24″ MS Ladder Bar Frame Kit For 28″ Ladder Bars
 Part# 10-351MS-KIT
24″ Fully, welded round tube 1-5/8″ x .134 wall mild steel ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions (note: 32″ ladders shown)
Kit includes:
Welded rear frame
28″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-351MS-KIT -
Mild Steel
24″ MS Ladder Bar Frame Kit For 32″ Ladder Bars
 Part# 10-330-KIT
24″ Fully, welded round tube 1-5/8″ x .134 mild steel ladder bar rear frame, packages designed specifically for applications that need a 32 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions
Kit includes:
Welded rear frame
32″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-330-KIT -
S&W Made Parts, Mild Steel
24″ MS Ladder Bar Rear Frame For 28″ Ladder Bars
 Part# 10-351MS
24″ Fully, welded round tube 1-5/8″ x .134 wall mild steel ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable.
SKU: 10-351MS -
Mild Steel
24″ MS Pro 500 4-Link Round Tube Frame Kit
Part# 10-431-24KIT
24″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .134 wallmild stee tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
Base kit contains:
Welded rear frame
Upgraded 4-link tubes
FK chromoly rod ends with hardware
QA1 single adjustable shocks with springs
Lower shock mounts
4-link rear housing brackets
Welded wishbone kitSKU: 10-431-24KIT -
S&W Made Parts, Chrome Moly
24″ Pro 500 4-Link CM Welded Rear Frame
Part# 10-431CM-24
24″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .083 wall chromoly tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
P-5 frame general configuration
SKU: 10-431CM-24 -
S&W Made Parts, Mild Steel
24″ Pro 500 4-Link MS Welded Rear Frame
Part# 10-431-24
24″ P-5 series 4-link round tube frames are made of, 1-5/8″ x .134 wall mild steel tubing. A possible 210 adjustments depending on rear housing brackets. 1/2″ 4-link mounting holes, Anti-roll bar mount installed
P-5 frame general configuration
SKU: 10-431-24 -
Welded Frames
24″ Universal 4-Link Frame Kit
Part# 10-400KIT
S&W Race Cars 24″ wide universal 4-link rear frame kit is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the Laser/Link 4-link mounts and upper shock cross-member fully installed.
10-300-400 installation instructions
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing brackets
SKU: 10-400KIT -
Welded Frames
24″ Universal Ladder Bar Frame Kit
Part# 10-300KIT
S&W Race Cars 24″ wide  ladder bar rear frame kit is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the ladder bar mounts and upper shock cross-member fully installed.
10-300-400 install instructions
Base ladder frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
32″ ladder bars with FK standard rod ends
Panhard or track bar
Rear housing brackets
SKU: 10-300KIT -
S&W Made Parts, Mild Steel
24″ Wide Round Tube Mild Steel Ladder Bar Frame, For 32″ Ladder Bars
 Part# 10-330
24″ Fully, welded round tube 1-5/8″ x .134 wall mild steel ladder bar rear frame, packages designed specifically for applications that need a 32 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable.
SKU: 10-330 -
Chrome Moly
26″ CM Ladder Bar Frame Kit For 28″ Ladder Bars
 Part# 10-352CM-KIT
26″ Fully, welded round tube 1-5/8″ x .083 chromoly ladder bar rear frame, packages designed specifically for applications that need a 28 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions (note: instructions for 32″ ladders shown)
Kit includes:
Welded rear frame
28″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-352CM-KIT -
Chrome Moly
26″ CM Ladder Bar Frame Kit For 32″ Ladder Bars
 Part# 10-331CM-KIT
26″ Fully, welded round tube 1-5/8″ x .083 chromoly ladder bar rear frame, packages designed specifically for applications that need a 32 ” long ladder bar and where removing, the rear floor pan is either more practical or more desirable. Note: photo shown is bare frame
10-330, 10-331 & 10-332 instuctions
Kit includes:
Welded rear frame
32″ ladder bar with FK chromoly rod ends
Rear housing brackets
Track bar
QA1 single adjustable coil over shocks and springs
Lower shock mounts
SKU: 10-331CM-KIT
