2×3 Direct Fit Welded Rear Frames
2x3 Direct Fit Welded Rear Frames Categories
2x3 Direct Fit Welded Rear Frames
Showing 1–24 of 44 results
-
55-57 Chevy
55-57 Chevy Ladder Bar Frame Kit
Part#10-500KIT
55-56-57 Chevy – fully welded frame, 2″ x 3″ rails, 28″ outside to outside frame rail width. Crossmember 34 3/4″ end to end, Frame is 84″ long, will fit standard or California frame. Uses 32″ ladder bars 55, 56, 57 Chevy wheelbase is 115″
10-500 frame general arrangement
Base ladder frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
32″ ladder bars with FK rod ends
Panhard or track bar
Rear housing brackets
SKU: 10-500KIT -
S&W Made Parts, 55-57 Chevy
55, 56, 57 Chevy Ladder Bar Frame – Fully Welded
Part#10-500
55-56-57 Chevy – fully welded frame, 2″ x 3″ rails, 28″ outside to outside frame rail width. Crossmember 34 3/4″ end to end, Frame is 84″ long, will fit standard or California frame. Uses 32″ ladder bars 55, 56, 57 Chevy wheelbase is 115″
Note: photo shown is 10-500KIT
10-500 installation instructions
SKU: 10-500 -
64-72 Chevelle
64-72 Chevelle Ladder Bar Frame Kit
Part#10-501KIT
64- 72 Chevelle, Pontiac, Oldsmobile, Buick – fully welded frame, 2″ x 3″ rails, 27-5/8″ outside to outside frame rail width. Uses 32″ ladder bars
Base ladder frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
32″ ladder bars with FK standard rod ends
Panhard or track bar
Rear housing brackets
SKU: 10-501KIT -
67-69 Camaro, S&W Made Parts
67-69 Camaro and Firebird Direct Fit 24″ Wide 4-Link Welded Rear Frame
Part# 10-510-24
24″ 4-link welded rear frame kit. SW Race Cars direct fit 67 – 69 Camaro and Firebird is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the 4-link mounts and upper shock crossmember fully installed. 2″ x 3″ x 083 mild steel frame trimmed to fit Camaro and Firebird
SKU: 10-510-24 -
67-69 Camaro
67-69 Camaro/Firebird 4-Link 24″ Frame Kit
Part# 10-510-24KIT
The 4-link welded frame for the 67-69 Camaro, Firebird features frame rails at a 24″ width and is designed to fit up to 15 x 33 drag tires or 31 x 18.5 Hoosier street radial tires. Each frame comes completely welded with 2″ x 3″ mandrel formed frame rails, front crossmember, 4-link front mounts, rear shock crossmember with upper shock mounts is completely jig-welded at S W Race Cars to assure proper clearances and ease of installation.The complete rear frame is designed to retain all stock body and bumper mounts and is designed to be fully installed with minimal amount of cutting to the original frame.This frame must be used with at least a 8 point roll bar for support.
10-400 frame general arrangement
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing brackets
SKU: 10-510-24KIT -
67-69 Camaro
67-69 Camaro/Firebird 4-Link 26″ Frame Kit
Part# 10-510-26KIT
The 4-link welded frame for the 67-69 Camaro, Firebird features frame rails at a 26″ width and is designed to fit up to 15 x 33 drag tires or 31 x 18.5 Hoosier street radial tires. Each frame comes completely welded with 2″ x 3″ mandrel formed frame rails, front crossmember, 4-link front mounts, rear shock crossmember with upper shock mounts is completely jig-welded at S W Race Cars to assure proper clearances and ease of installation.The complete rear frame is designed to retain all stock body and bumper mounts and is designed to be fully installed with minimal amount of cutting to the original frame.This frame must be used with at least a 8 point roll bar for support.
10-400 frame general arrangement
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing brackets
SKU: 10-510-26KIT -
67-69 Camaro, S&W Made Parts
67-69 Camaro/Firebird 4-Link 26″ Rear Frame
Part# 10-510-26
26″ 4-link welded rear frame kit. SW Race Cars direct fit 67-69 Camaro is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the 4-link mounts and upper shock crossmember fully installed. 2″ x 3″ x 083 mild steel frame trimmed to fit Camaro and Firebird
Note: picture shown is 10-510KIT
SKU: 10-510-26 -
67-69 Camaro
67-69 Camaro/Firebird 4-Link 28″ Frame Kit
Part# 10-510-28KIT
The 4-link welded frame for the 67-69 Camaro, Firebird features frame rails at a 28″ width and is designed to fit up to 15 x 33 drag tires or 31 x 18.5 Hoosier street radial tires. Each frame comes completely welded with 2″ x 3″ mandrel formed frame rails, front crossmember, 4-link front mounts, rear shock crossmember with upper shock mounts is completely jig-welded at S W Race Cars to assure proper clearances and ease of installation.The complete rear frame is designed to retain all stock body and bumper mounts and is designed to be fully installed with minimal amount of cutting to the original frame.This frame must be used with at least a 8 point roll bar for support.
10-400 frame general arrangement
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing brackets
SKU: 10-510-28KIT -
67-69 Camaro, S&W Made Parts
67-69 Camaro/Firebird 4-Link 28″ Rear Frame
Part# 10-510-28
28″ 4-link welded rear frame kit. SW Race Cars direct fit 67-69 Camaro and Firebird is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the 4-link mounts and upper shock crossmember fully installed. 2″ x 3″ x 083 mild steel frame trimmed to fit Camaro and Firebird
Note: picture shown is 10-510KIT
SKU: 10-510-28 -
68-74 Nova, S&W Made Parts
68-74 Nova 4-link 28″ Welded Rear Frame
Part# 10-515-28
28″ wide 4-link welded rear frame . Fully welded rear frame packages specifically designed for the 1968 – 1974 Chevrolet Nova. This frame will also fit the Buick Apollo, Pontiac Ventura, Oldsmobile Omega of the same years. These frames are jig welded to assure proper alignment of critical suspension mounts. Installation requires removal of rear floor pan.”
Note: picture shown is 10-515KIT
10-515 general frame configuration before trimming
10-515 installation instructions
SKU: 10-515-28 -
68-74 Nova, S&W Made Parts
68-74 Nova 4-link Direct Fit 24″ Welded Rear Frame
Part# 10-515-24
24″ wide 4-link welded rear frame . Fully welded rear frame packages specifically designed for the 1968 – 1974 Chevrolet Nova. This frame will also fit the Buick Apollo, Pontiac Ventura, Oldsmobile Omega of the same years. These frames are jig welded to assure proper alignment of critical suspension mounts. Installation requires removal of rear floor pan.”
Note: picture shown is 10-515KIT
10-515 general arrangement before trimming
10-515 installation instructions
SKU: 10-515-24 -
68-74 Nova, S&W Made Parts
68-74 Nova 4-link Direct Fit 26″ Welded Rear Frame
Part# 10-515-26
26″ wide 4-link welded rear frame . Fully welded rear frame packages specifically designed for the 1968 – 1974 Chevrolet Nova. This frame will also fit the Buick Apollo, Pontiac Ventura, Oldsmobile Omega of the same years. These frames are jig welded to assure proper alignment of critical suspension mounts. Installation requires removal of rear floor pan.”
Note: picture shown is 10-515KIT
10-515 frame general arrangement before trimming
10-515 installation instructions
SKU: 10-515-26 -
68-74 Nova
68-74 Nova 4-Link Kit 24″ Frame Kit
Part# 10-515-24KIT
S&W Race Cars 24″ wide 68-74 Nova 4-link rear frame kit is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the Laser/Link 4-link mounts and upper shock cross-member fully installed.
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing bracketsSKU: 10-515-24KIT -
68-74 Nova
68-74 Nova 4-Link Kit 26″ Frame Kit
Part# 10-515-26KIT
S&W Race Cars 26″ wide 68-74 Nova 4-link rear frame kit is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the Laser/Link 4-link mounts and upper shock cross-member fully installed.
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing brackets
SKU: 10-515-26KIT -
68-74 Nova
68-74 Nova 4-Link Kit 28″ Frame Kit
Part# 10-515-28KIT
S&W Race Cars 28″ wide 68-74 Nova 4-link rear frame kit is great for Pro/Street or E.T. drag racing. Designed for ease of installation, it greatly reduces the time and effort previously required to back-half your car. Each frame arrives at your door completely jig-welded, with the Laser/Link 4-link mounts and upper shock cross-member fully installed.
Base 4-link frame kit includes:
Welded rear frame
Entry level pro series shocks and spring kit with mounts
Standard 4-link bars
FK chromoly rod ends and hardware
Panhard or track bar
Rear housing brackets
SKU: 10-515-28KIT -
78-83 Malibu/Monte Carlo, S&W Made Parts
78-83 Malibu (G-Body) 4-Link Welded Rear Frame
Part# 10-508
The SW welded frame for the 78-88 GM “G” body is designed to fit up to 15 x 33 drag tires or 31 x 18.5 Hoosier street radial tires. This frame comes completely welded with 2 x 3″ mandrel formed frame rails, front crossmember, 4-link front mounts, rear shock crossmember with upper shock mounts and a panhard bar mount and is completely jig-welded at S W Race Cars to assure proper clearances and ease of installation. The complete rear frame is designed to retains all stock body and bumper mounts and is designed to be fully installed with minimal amount of cutting to the original frame. This frame must be used with at least a 8 point roll bar for support.
Note: photo is 10-508KIT
10-508 general frame arrangement before trimming
10-508 installation instructions
SKU: 10-508