Camaro Bolt-ons 1967 & Newer
Camaro Bolt-on Parts Categories
Camaro Bolt-on Parts
Showing 1–24 of 173 results
-
K-Member, Front Suspension & Rear Suspension Packages, Combo Kits, S&W Made Parts
1982 – 2002 Camaro / Firebird Bolt-on Competition Rear Suspension Package
K-Member, Front Suspension & Rear Suspension Packages, Combo Kits, S&W Made Parts1982 – 2002 Camaro / Firebird Bolt-on Competition Rear Suspension Package
Part# CAMARO-PACK-2 1982-2002 Camaro / Firebird Kit includes chromoly adjustable torque arm #40-601CM, chromoly bolt-on frame connectors with driveshaft loop, mild steel lower control arms #40-602CM, chromoly adjustable panhard bar #40-603CM and mild steel panhard brace #40-607.
SKU: CAMARO-PACK-2$1,425.35 -
Weld-in Crossmember, S&W Made Parts
1993-2002 Camaro / Firebird Weld In Crossmember Kit
 Part# 40-611
Adapts S&W torque arm to other after market sub-frames, Includes crossmember 1-1/2″ diameter 44-1/2″ inches long. torque arm brackets welded on, 4 mounting tabs, bushings and hardware.
Cutting welding, drilling required. Driveshaft loop not included.
Use driveshaft loop 40-612
SKU: 40-611$70.95 -
Stock Replacement/Bolt In, Bolt-in Rear Housings
67-69 & 70-81 Camaro ,62-67 & 68-76 Nova Complete 9″ Ford Big Bearing Bolt In Rear
Stock Replacement/Bolt In, Bolt-in Rear Housings67-69 & 70-81 Camaro ,62-67 & 68-76 Nova Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-620
Johns Industries 67-69 70-81 CAMARO,62-67 68-76 NOVA, COMPLETE 9″FORD BIG BEARING BOLT IN REAR, COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU-TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-620$3,491.00 -
K-Member, Front Suspension & Rear Suspension Packages, S&W Made Parts, Racks
67-69 Camaro & 68-74 Nova Rack & Pinion Mounting Kit
K-Member, Front Suspension & Rear Suspension Packages, S&W Made Parts, Racks67-69 Camaro & 68-74 Nova Rack & Pinion Mounting Kit
Part# 35-371
Converts stock rear steer to rack & pinion front steer. removal of stock lower control arm crossmember required. Replacement removable tubular crossmember under engine included. Also includes rack pinion mounting bracket, billet aluminum pinto rack mount clamp, tie rods, diagonal brace gussets and crossmember cap off plates with integral tie down loops and hardware. Cutting, fitting welding required.
Note” pinto rack 35-042 and 35-078 aluminum steering arms not included
SKU: 35-371$324.35 -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Adjustable Torque Arm for Through Bolt Type Housings
Adjustable Torque Arms, S&W Made Parts82-02 Camaro / Firebird Adjustable Torque Arm for Through Bolt Type Housings
Part# 40-601
SW Race Cars new 82-02 Camaro / Firebird torque arm is designed to the samespecifications as our own ³ race bred² ladder bars. Made of high quality,1² x .156² wall DOM steel tubing, each torque arm is “direct threaded” for maximum strength. Also utilized at the rear of the torque arm are the same ³race proven ³ rod ends and adjusters featured on SW¹s ladder bars. Up front each torque arm features an Energy Suspension polyurethane bushing for quieter ride and limited driveline vibrations while insuring high strength and long life. SW Race Cars new 82-02 Camaro / Firebird torque arm must be used with an SW Race Cars, 82-92 Camaro / Firebird subframe connector crossmember kit, sold separately. All components are powder coated black for a long lasting, durable and attractive finish. NOTE! THIS TORQUE ARM  IS FOR APPLICATIONS USING THROUGH-BOLT MOUNTING TO ATTACH THE TORQUE ARM TO THE FACTORY REAR HOUSING ONLY AND NEEDS SW FRAME CONNECTOR KIT .  Applications using an aftermarket housing which utilizes 4 threaded mounting hole should used torque arm # 40-606
40-601 page 1 instuctions 40-601- page 2 instructions
Â
SKU: 40-601$309.45 -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Adjustable Torque Arm Mild Steel – 9″ Ford Housing
Adjustable Torque Arms, S&W Made Parts82-02 Camaro / Firebird Adjustable Torque Arm Mild Steel – 9″ Ford Housing
Part# 40-617
Includes; Mild steel 40-601 torque arm , 40-618 rear torque arm mounting bracket, front mounting link, top & bottom mounting lugs for 9″ Ford housing, lateral link, mounting bracket and hardware. Black powder coated Customer required to weld lugs to rear housing (use 40-617-JIG). Requires S&W Race Cars frame connectors or after market crossmember
40-618 bracket install 40-601-1 instructions 40-601-2 instructions  Â
SKU: 40-617$467.45 -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Chromoly Adjustable Torque Arm -9″ Ford Housing
Adjustable Torque Arms, S&W Made Parts82-02 Camaro / Firebird Chromoly Adjustable Torque Arm -9″ Ford Housing
Part# 40-617CM
Includes; chromoly 40-601CM torque arm , 40-618 rear torque arm mounting bracket, front mounting link, top & bottom mounting lugs for 9″ Ford housing, lateral link, mounting bracket and hardware. Black powder coated Customer required to weld lugs to rear housing (use 40-617-JIG). Requires S&W Race Cars frame connectors or after market crossmember
40-618 instructions 40-601-2 instructions 40-601-1 instructions
SKU: 40-617CM$555.35 -
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Chrome Moly Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Chrome Moly Lower Control Arms
Part# 40-602CM
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .083″ wall chrome moly steel tubing. High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated silver for a long lasting, durable and attractive finish. Also fits 78-82 Malibu and 78-88 Monte Carlo other GM G-bodies.
SKU: 40-602CM$205.55 -
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Part# 40-602
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602$164.25 -
Adjustable Panhard Bars, S&W Made Parts
82-02 Camaro / Firebird Adjustable Chrome Moly Panhard Bar
Part# 40-603CM
The SW Race Cars 82-02 Camaro / Firebird panhard bar is also fabricated from high quality,1-1/4″ x .095″ wall Chrome Moly steel tubing and features Energy Suspension polyurethane bushings at both ends. As an added feature this panhard bar features a left/right adjuster which allows the changes in length required by vehicles with lowered ride heights. All without removing the mounting hardware. Powder coated silver for a long lasting, durable and attractive finish.
SKU: 40-603CM$190.75 -
Adjustable Panhard Bars, S&W Made Parts
82-02 Camaro / Firebird Adjustable Panhard Bar
Part# 40-603
The SW Race Cars 82-02 Camaro / Firebird panhard bar is also fabricated from high quality,1″ x .156″ wall DOM steel tubing and features Energy Suspension polyurethane bushings at both ends. As an added feature this panhard bar features a left/right adjuster which allows the changes in length required by vehicles with lowered ride heights. All without removing the mounting hardware. Powder coated for a long lasting, durable and attractive finish.
SKU: 40-603$152.55 -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Chrome Moly Torque Arm for Housings with 4 Threaded Mounting Holes
Adjustable Torque Arms, S&W Made Parts82-02 Camaro / Firebird Chrome Moly Torque Arm for Housings with 4 Threaded Mounting Holes
Part# 40-606CM
SW Race Cars new 82-02 Camaro / Firebird torque arm. Made of high quality, 1-1/4 x .095″ wall chomoly tubing, each torque arm is direct threaded for maximum strength. Also utilized at the rear of the torque arm are the same race proven rod ends and adjusters featured on SW’s ladder bars. All components are powder coated for a long lasting, durable and attractive finish.
Note : used for after market rear housings that utilize (4) 1/2″ threaded mounting holes to attach arm Applications using an stock housings or through bolt mounting should used torque arm # 40-601 or 40-601CM
SKU: 40-606CM$391.05 -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Torque Arm for Housings with 4 Threaded Mounting Holes
Adjustable Torque Arms, S&W Made Parts82-02 Camaro / Firebird Torque Arm for Housings with 4 Threaded Mounting Holes
Part# 40-606
SW Race Cars new 82-02 Camaro / Firebird torque arm is designed to the same specifications as our own race bred ladder bars. Made of high quality, 1″x .156″ wall DOM steel tubing, each torque arm is direct threaded for maximum strength. Also utilized at the rear of the torque arm are the same race proven rod ends and adjusters featured on SW’s ladder bars. All components are powder coated black for a long lasting, durable and attractive finish.
Note : used for after market rear housings that utilize (4) 1/2″ threaded mounting holes to attach arm  Applications using an stock housings or through bolt mounting should used torque arm # 40-601 or 40-601CM
SKU: 40-606$309.45 -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro/Firebird Adjustable Chrome Moly Torque Arm for Through Bolt Housings
Adjustable Torque Arms, S&W Made Parts82-02 Camaro/Firebird Adjustable Chrome Moly Torque Arm for Through Bolt Housings
Part# 40-601CM
SW Race Cars new 82-02 Camaro / Firebird chrome moly torque arm is made of high quality,1-1/4″ x .095 and 1-3/8″ x .095 wall chrome moly steel tubing At the rear of the torque arm are the same “race proven” rod ends and adjusters featured on SW’s ladder bars. Up front each torque arm features an Energy Suspension polyurethane bushing for quieter ride and limited driveline vibrations while insuring high strength and long life. SW Race Cars new 82-02 Camaro / Firebird torque arm must be used with an SW Race Cars, 82-92 Camaro / Firebird subframe connector crossmember kit, sold separately. All components are powder coated silver for a long lasting, durable and attractive finish. NOTE! THIS TORQUE ARMS ARE FOR APPLICATIONS USING THROUGH-BOLT MOUNTING TO ATTACH THE TORQUE ARM TO THE REAR HOUSING ONLY AND NEEDS SW FRAME CONNECTOR KIT *Applications using an aftermarket housing which utilizes 4 threaded mounting hole should used torque arm # 40-606CM
SKU: 40-601CM$391.05 -
Stock Replacement/Bolt In, Bolt-in Rear Housings, S&W Made Parts
82-03 Camaro Rear Suspension Bracket Kit
Stock Replacement/Bolt In, Bolt-in Rear Housings, S&W Made Parts82-03 Camaro Rear Suspension Bracket Kit
Part# 40-449
Includes lower control arm and shock mount brackets and panhard brackets. Plus adjustable spring pads with adjustment wrench. Made from 3/16″ mild steel to fit 3″ axle tube
SKU: 40-449$305.25 -
Connectors, Bolt-In for OEM/Stock Applications, S&W Made Parts
82-92 Camaro / Firebird Bolt On Chrome Moly Sub Frame Connectors
Connectors, Bolt-In for OEM/Stock Applications, S&W Made Parts82-92 Camaro / Firebird Bolt On Chrome Moly Sub Frame Connectors
Part# 40-600CM
Designed to be 100% bolt on for your 82-92 Camaro / Firebird coupe (does not fit convertible), this kit requires no welding and can be installed using hand tools. This kit also clears all stock exhaust components while closely following the floor pan contour assuring you a close fit and maximum ground clearance. The included crossmember features a mount for SW adjustable torque arm which can be purchased separately and installed along with the subframe connectors and crossmember, or you can retain your O.E.M.torque arm and mount. The connectors and crossmember are fabricated from 1-1/2″ x .065″ wall chrome moly tubing and feature waterjet cut brackets for exact fit. These components are hand assembled on a custom welding fixture and TIG welded for high strength and ease of installation. All of the above components are powder coated silver for a long lasting, durable and attractive finish.
40-600 1of 3 instructions 40-600 3 of 3 instructions 40-600 2 of 3 instructions
SKU: 40-600CM$532.05 -
Bolt-In for OEM/Stock Applications, Connectors, S&W Made Parts
82-92 Camaro / Firebird Bolt On Sub Frame Connectors
Bolt-In for OEM/Stock Applications, Connectors, S&W Made Parts82-92 Camaro / Firebird Bolt On Sub Frame Connectors
Part#40-600
Designed to be 100% bolt on for your 82-92 Camaro / Firebird coupe (does not fit convertible), this kit requires no welding and can be installed using hand tools. This kit also clears all stock exhaust components while closely following the floor pan contour assuring you a close fit and maximum ground clearance. This is the only kit on the market which ties the subframes, rockers and floor pan into one assembly! The included crossmember features a mount for SW adjustable torque arm which can be purchased separately and installed along with the subframe connectors and crossmember, or you can retain your O.E.M.torque arm and mount. The connectors and crossmember are fabricated from 1-1/2 x .120 wall steel tubing and feature waterjet cut brackets for exact fit. These components are hand assembled on a custom welding fixture and MIG welded for high strength and ease of installation. All of the above components are powder coated black for a long lasting, durable and attractive finish.
40-600 2 of 3 instructions 40-600 3 of 3 instructions 40-600 1 of 3 instructions
SKU: 40-600$409.15 -
Bolt-In for OEM/Stock Applications, Connectors, S&W Made Parts
93-02 Camaro / Firebird Bolt On Chrome Moly Sub Frame Connectors
Bolt-In for OEM/Stock Applications, Connectors, S&W Made Parts93-02 Camaro / Firebird Bolt On Chrome Moly Sub Frame Connectors
Part# 40-610CM
Designed to be 100% bolt on for your 93-02 Camaro / Firebird coupe (does not fit convertible), this kit requires no welding and can be installed using hand tools. This kit also clears all stock exhaust components while closely following the floor pan contour assuring you a close fit and maximum ground clearance. This is the only kit on the market which ties the subframes, rockers and floor pan into one assembly! The included crossmember features a mount for SW¹s adjustable torque arm which can be purchased separately and installed along with the subframe connectors and crossmember, or you can retain your O.E.M.torque arm and mount. The connectors and crossmember are fabricated from1-1/2″x .065″ wall chrome moly steel tubing and feature waterjet cut brackets for exact fit. These components are hand assembled on a custom welding fixture and TIG welded for high strength and ease of installation. All of the above components are powder coated silver for a long lasting, durable and attractive finish.
SKU: 40-610cm$532.05CompareThe product is already in the wishlist! Browse Wishlist -
Bolt-In for OEM/Stock Applications, Connectors, S&W Made Parts
93-02 Camaro / Firebird Bolt On Sub Frame Connectors
Bolt-In for OEM/Stock Applications, Connectors, S&W Made Parts93-02 Camaro / Firebird Bolt On Sub Frame Connectors
Part# 40-610
Designed to be 100% bolt on for your 93-02 Camaro / Firebird coupe (does not fit convertible), this kit requires no welding and can be installed using hand tools. This kit also clears all stock exhaust components while closely following the floor pan contour assuring you a close fit and maximum ground clearance. This is the only kit on the market which ties the subframes, rockers and floor pan into one assembly! The included crossmember features a mount for SW¹s adjustable torque arm which can be purchased separately and installed along with the subframe connectors and crossmember, or you can retain your O.E.M.torque arm and mount. The connectors and crossmember are fabricated from 1-1/2² x .120² wall steel tubing and feature waterjet cut brackets for exact fit. These components are hand assembled on a custom welding fixture and MIG welded for high strength and ease of installation. All of the above components are powder coated black for a long lasting, durable and attractive finish.
40-610_1of 2 instructions 40-610_2of 2 instructions
SKU: 40-610$409.15 -
Stock Replacement/Bolt In, Bolt-in Rear Housings, S&W Made Parts
Bolt In 9″ Ford Housing for 82-92 Camaro Stock Width
Stock Replacement/Bolt In, Bolt-in Rear Housings, S&W Made PartsBolt In 9″ Ford Housing for 82-92 Camaro Stock Width
Part# 45-450
Same width as stock, 56-1/4″ housing end to housing end, 61-3/4″ axle face to axle face, (1/2″ pinion off-set), uses GM housing ends with 3.15 bearing. Uses after market brakes. Brackets are in stock locations, lower control arm brackets have additional mounting holes. Adjustable weight jacker spring pad. Works with 40-619 or 40-619CM torque arm and 40-600 or 40-600CM frame connectors
SKU: 45-450$818.25
