Component Clearance competition components and performance street parts, for cars and trucks. S&W Performance Group and S&W Race Cars.
Component Clearance
Showing all 16 results
-
Upper Control Arms, Component Clearance, S&W Made Parts
1979-2004 Mustang Upper Control Arms (Clearance)
Upper Control Arms, Component Clearance, S&W Made Parts1979-2004 Mustang Upper Control Arms (Clearance)
Part# 40-723-1
NOTE: THESE ARE NEW BUT HAS SCRACTHED POWDER COATING FROM DSPLAY (ONLY ONE AVAILABLE)
upper control arms with hex adjuster for setting pinion angle, chromoly FK rod ends, aluminum bushings replace stock rear housing bushings, grade 8 hardware, black powder coated.
SKU: 40-723-1 -
Component Clearance, Lower Control Arms, S&W Made Parts
2005-2014 Mustang Lower Control Arms (Clearance)
Component Clearance, Lower Control Arms, S&W Made Parts2005-2014 Mustang Lower Control Arms (Clearance)
Part# 40-702-1
NOTE: THESE ARE NEW BUT HAS SCRACTHED POWDER COATING FROM DSPLAY (ONLY ONE AVAILABLE)
2005-2014 Mustang Lower Control Arms, Super strong 1-1/4 x .120″ wall tubing – will not deflect like stock arms. Direct replacement, uses factory hardware.”
SKU: 40-702-1 -
Shock Tower Braces, Component Clearance, S&W Made Parts
2005-2014 Mustang Shock Tower Brace (Clearance)
Shock Tower Braces, Component Clearance, S&W Made Parts2005-2014 Mustang Shock Tower Brace (Clearance)
Part# 40-715-1
NOTE: THESE ARE NEW BUT HAS SCRACTHED POWDER COATING FROM DSPLAY (ONLY ONE AVAILABLE)
2005-2014 Mustang Shock Tower Brace, works with fuel injected 4.7L V-8, bolt to strut towers using stock nuts, black powder coated
SKU: 40-715-1 -
Lower Control Arms, Component Clearance, S&W Made Parts
79-04 Mustang Tubular Lower Control Arms (Clearance)
Lower Control Arms, Component Clearance, S&W Made Parts79-04 Mustang Tubular Lower Control Arms (Clearance)
Part# 40-721-1
NOTE: THESE ARE NEW BUT HAS SCRACTHED POWDER COATING FROM DSPLAY (ONLY ONE AVAILABLE)
Perfect for ET Bracket racing or Stock Eliminator! Custom fabricated from super strong 1-5/8 x .134″ wall tubing. High Quality Energy Suspension bushings retain ride quality and eliminate bushing movement. Direct replacement for factory control arm and installs with factory hardware – DOES NOT accept factory sway bars!”
SKU: 40-721-1 -
Lower Control Arms, Component Clearance, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms (Clearance)
Lower Control Arms, Component Clearance, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms (Clearance)
Part# 40-602-1
NOTE: THESE ARE NEW BUT HAS SCRACTHED POWDER COATING FROM DSPLAY (ONLY ONE AVAILABLE)
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602-1 -
Component Clearance, K-Member, Front Suspension & Rear Suspension Packages, Direct Fit
QA-1 Double Adjustable Pro Coil Kit- 550# Springs GD501-10550A
Component Clearance, K-Member, Front Suspension & Rear Suspension Packages, Direct FitQA-1 Double Adjustable Pro Coil Kit- 550# Springs GD501-10550A
Part# 50-GD501-10550A
QA-1 Double adjustable shock & spring kit-550# Springs, Pro Coil Front Coil-Over System Double Adjustable Shock 9” Compressed / 12.8” Extended Shock Height 10” Spring Free Length
64-67 Chevelle, 64-67 Olds 442, 64-67 Pontiac GTO
SKU: GD501-10550A -
Component Clearance, Axles, Bearings, Studs & Retainers
Strange Race Axles (Matched Pair), 31 Spline, 3.15 Bearings, Drilled for 1/2″ Studs
Component Clearance, Axles, Bearings, Studs & RetainersStrange Race Axles (Matched Pair), 31 Spline, 3.15 Bearings, Drilled for 1/2″ Studs
Part# P1007-Clearance
NEW, Never Installed, Strange Race Axles, 31 spline, with bearings. drilled for 1/2″ wheel studs, 4-3/4 bolt circle, 3.15 race bearing pressed on, set for late model big Ford housing ends (2-1/2″ brake gap). Axles measure 16-1/2″ & 21-7/8″ from axle face to end of spline Originally built for Ford 9″, center pinion, housing end to housing end 33-1/4″ , using a 31 spline Detroit Locker (price is for the pair)
Only one set available
SKU: P1007-Clearance