Door Car Body Parts
Door Car Body Parts Categories
Door Car Body Parts
Showing 1–24 of 52 results
-
Spoilers, Spoilers, Body, S&W Made Parts
1994-2004 S10 Pickup Rear Spoiler Kit
Part# 95-705
Spoiler made from .050 aluminum, comes with all necessary hardware and 2 spoiler support rods. Spoiler is 54 wide and extends 14″ off the back of the truck” Â spill plates are 3″ x 14″
instructions 95-705 (1of3) instructions 95-705 (2of3) instructions 95-705 (3OF3)
SKU: 95-705 -
-
Spoilers, Spoilers, S&W Made Parts
70-81 Camaro Rear Spoiler Kit
Part# 95-707
Bolt on, adjustable competition spoiler features chromoly deck support frame and support struts. 0.060″ Aluminum deck and spill plates. 58-3/4″ wide, deck extends 16″ past trunk lid. Spill plates are 18-1/2″ long, 9″ tall, 2-1/2″ above the deck
SKU: 95-707 -
Spoilers, Spoilers, S&W Made Parts
79-93 Mustang Coupe Aluminum Spoiler
Part#95-704
Specifically designed for the 79-93 Mustang coupe, SW’s aluminum spoiler comes with all necessary hardware and 2 spoiler support rods. Spoiler is 54 wide and extends 14″ off the back of the car. Also available in carbon fiber”
SKU: 95-704 -
Spoilers, Spoilers, S&W Made Parts
79-93 Mustang Hatchback Aluminum Spoiler
Part#95-703
Specifically designed for the 79-93 Mustang hatchback, SW’s aluminum spoiler comes with all necessary hardware and 2 spoiler support rods. Spoiler is 54 wide and extends 14″ off the back of the car. Also available in carbon fiber Part# 95-706
SKU: 95-703 -
Spoilers, Spoilers, S&W Made Parts
79-93 Mustang Hatchback Carbon Fiber Spoiler
Part#95-706
Specifically designed for the 79-93 Mustang hatchback, S&W’s carbon fiber spoiler comes with all necessary hardware and 2 spoiler support rods. Spoiler is 54 wide and extends 14″ off the back of the car. Also available in aluminum”
SKU: 95-706 -
-
-
Body, S&W Made Parts
Body Front End Mounting Kit
Part#95-500
For use with one piece fiberglass front ends. SW front end mounting kits can be used on O.E.M. frames or an all-tube chassis. Slip joints provide easy installation and removal plus maximum strength under aerodynamic load. This SW kit includes six (6) body mounting pads, two (2) frame mounting tubes, 7/8″ x .058 chrome moly tubing, 3/4″ x .058 chrome moly tubing, two (2) quick pins and six (6) quarter-turn fastener tabs with buttons, springs rivets.”
SKU: 95-500 -
-
-
-
Window, Body, S&W Made Parts
Door Window Frame Mount Kit
Part #95-654
Lexan door windows require additional support to keep them properly attached to the doors. SW’s door window support kit gives you everything needed to fabricate window supports for your car. This kit includes an easy to use tube bending fixture that clamps to any vise and allows you to custom form the tube frame to fit your car. No more hassle from pre-bent kits in a universal” shape. SW’s door window frame kit works with both steel fiberglass doors and includes; 20 feet of 3/8″ x .058″ wall mild steel tubing, 32 window mounting tabs, 32 6-32 stainless countersunk screws nylock nuts , Frame mounting tabs, Stainless frame mounting hardware, Bending fixture”
SKU: 95-654 -
Body, Combo Kits
Fiberglass Door Installation Kit
 Part# COMBO-KIT-7
Kit will do both doors. Package includes Window Frame Kit, Door Hinge Kit, Inner Door Handle Kit, Door Pull Kit, and Aluminum Door Panel Kit.
Door Pull kit is available blank or with Chevy logo, Ford logo, Mopar logo, or S&W logo. Choose option below.
SKU: COMBO-KIT-7 -
Body, S&W Made Parts
Front Mount Kit Guide Plate Type
Part#95-502
For use with one piece fiberglass front ends. SW front end mounting kits can be used on O.E.M. frames or an all-tube chassis. Slip joints provide easy installation and removal plus maximum strength under aerodynamic load. This SW kit includes six (6) body mounting pads, two (2) frame mounting tubes, 7-1/2 feet of 7/8 chrome moly tubing, 6 feet of 3/4″ chrome moly tubing, two (2) quick pins and six (6) quarter-turn fastener tabs with buttons, springs rivets.”
SKU: 95-502 -
Body, S&W Made Parts
Inside Door Handle Kit
 Part #95-552 Designed for use on fiberglass doors with aluminum panels. Each kit includes hardware for two doors – two (2) aluminum release handles, two (2) mounting brackets, two (2) 1/4x 2′ long threaded tubes, four (4) spherical rod ends and all hardware.” 95-552 instructions
SKU: 95-552
