Chassis & Blueprints
Showing 1–24 of 31 results
-
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
200″ Front Engine Nostalgia Dragster Chassis Kit;
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts200″ Front Engine Nostalgia Dragster Chassis Kit;
Part# 05-004
200″ wheelbase, front engine dragster chassis kit. Perfect for nostalgia dragster racing. Meets SFI spec 2.4C 6.00 – 7.49. Kit includes all chrome moly tubing, cut, bent and notched (where possible). Jig welded front axle, 1/4″ Aluminum mid motor plate blank. Aluminum front motor plate blanks. 9″ Ford rear with Olds ends. Rear housing mounts. Anti-rotation device. Blue print. NOTE – this is a chrome moly kit and must be TIG welded.
NOTE: This is an Oversize Truck Freight Item
SKU: 05-004 -
-
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001-AET
Advanced ET dragster kit- solid mount rear, 21” wide, 225” wheel base, 23” shoulder hoop, all chrome moly tubing, notched, bent, includes 9” Ford Rear housing with Olds ends, mounting plates, a-arm front end with king pin bosses, full mid plate, front motor plates meets SFI spec 2.5 for 6.00-7.49 seconds NOTE: This is an Oversize Truck Freight Item
SKU: 05-001-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001S-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 245″ Dragster Kit – For Solid Mount Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts21″ Wide, 245″ Dragster Kit – For Solid Mount Rear, No Rear Included
Part# 05-003-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49, 21″ SHOULDER HOOP, REAR HOUSING NOT INCLUDED !!!. KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MTR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS, BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003-AET -
Chassis & Blueprints, S&W Made Parts
23″ Wide Dragster Shoulder Hoop, 1-Piece
Part#05-069-23
1 1/2″ DIAMETER X 0.058 WALL CHROME MOLY, 1-PIECE WITH 2 BENDS FOR CHASSIS WITH ROLL CAGES LESS THAN 18″ TALL.23″ WIDE INSIDE AT BENDS, 30″ LONG. CUSTOMER REQUIRED TO MAKE 45 DEGREE CUTS AT ENDS
SKU: 05-069-23 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001W-S-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Part# 05-003W-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49 REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 23″ SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
NOTE: This is an Oversize Truck Freight Item
SKU: 05-002-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print.
NOTE: This is an Oversize Truck Freight Item
SKU: 05-002W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 21″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 21″ Wide
Part# 05-003-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES’s FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003-F-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-F-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Strange Rear, 21″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Strange Rear, 21″ Wide
Part# 05-003-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 CERT 6.00 – 7.49, INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003-S-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Part# 05-003W-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-S-AET -
Blueprints, Chassis & Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Blueprints, Chassis & Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Blueprints, Chassis & Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP -
Blueprints, Chassis & Blueprints, S&W Made Parts
Blueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Blueprints, Chassis & Blueprints, S&W Made PartsBlueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Part# 05-002-AET-BP
Assembly blueprint with cut list for 230″ wheelbase ADVANCED ET dragster with swing arm rear suspension. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-002-AET-BP -
Blueprints, Chassis & Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Blueprints, Chassis & Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP -
-