Front Frame Kits
Showing all 15 results
-
Front Frame Kits, S&W Made Parts
2″x3″ Strut Front Frame & Crossmember
Part# 36-500
SW’s strut front frame package is designed to simplify installation for the do-it-yourselfer.The base frame package features mandrel formed 2″ x 3″ frame rails, rear lower control arm mounts, a fully welded rack pinion crossmember with front lower control arm mounts and a front subframe support package to tie the frame rails to the roll cage. . Complete installation requires the use of an upper strut mounting kit. This kit can be used with any eye or stud mount Strange strut package.
Note: picture shows struts and rack installed
SKU: 36-500$316.85 $285.17 10% off! -
Front Frame Kits
A-Arm Frame 52-3/16 Hub to Hub Kit
Part# 36-400-6KIT
52-3/16″ hub to hub
2 x 3 x 120 wall frame rails , x-member, 3/16″thick suspension brackets, Includes frame rails with a-arm brackets and shock support brackets welded on. Rack crossmember with rack mount welded on. Frame “X” brace, pre-notched to fit 52-3/16″ hub to hub, 24″ outside 20″ inside. Overall length 100″. 88″ from spindle centerline to end of rail. Front crossmember must be welded to frame rails buy installer.
Kit includes:
Frame rails with welded brackets
Front crossmember with welded rack mount brackets
Upper & lower tubular control arms with ball joints
Mustang II spindles
Flaming River rack with mounts
Single adjustable coil over shocks and springs
Tie rods
Front supports
SKU: 36-400-6KIT$2,823.94 -
Front Frame Kits
A-Arm Frame 55-3/16 Hub to Hub Kit
Part# 36-400-3KIT
55-3/16″ hub to hub
2 x 3 x 120 wall frame rails , x-member, 3/16″thick suspension brackets, Includes frame rails with a-arm brackets and shock support brackets welded on. Rack crossmember with rack mount welded on. Frame “X” brace, pre-notched to fit 55-3/16″ hub to hub, 27″ outside 23″ inside. Overall length 100″. 88″ from spindle centerline to end of rail. Front crossmember must be welded to frame rails buy installer.
Kit includes:
Frame rails with welded brackets
Front crossmember with welded rack mount brackets
Upper & lower tubular control arms with ball joints
Mustang II spindles
Flaming River rack with mounts
Single adjustable coil over shocks and springs
Tie rods
Front supports
SKU: 36-400-3KIT$2,823.94 -
Front Frame Kits
A-Arm Frame 58-3/16 Hub to Hub Kit
Part# 36-400KIT
58-3/16″ hub to hub
2 x 3 x 120 wall frame rails , x-member, 3/16″thick suspension brackets, Includes frame rails with a-arm brackets and shock support brackets welded on. Rack crossmember with rack mount welded on. Frame “X” brace, pre-notched to fit 58-3/16″ hub to hub, 30″ outside 26″ inside. Overall length 100″. 88″ from spindle centerline to end of rail. Front crossmember must be welded to frame rails buy installer.
Kit includes:
Frame rails with welded brackets
Front crossmember with welded rack mount brackets
Upper & lower tubular control arms with ball joints
Mustang II spindles
Flaming River rack with mounts
Single adjustable coil over shocks and springs
Tie rods
Front supports
SKU: 36-400KIT$2,524.94 -
Front Frame Kits, S&W Made Parts
A-Arm Frame Rails 52-3/16 Hub to Hub
Part# 36-400-6
52-3/16″ hub to hub
2 x 3 x 120 wall frame rails , x-member, 3/16″thick suspension brackets, Includes frame rails with a-arm brackets and shock support brackets welded on. Rack crossmember with rack mount welded on. Frame “X” brace, pre-notched to fit 52-3/16″ hub to hub, 24″ outside 20″ inside. Overall length 100″. 88″ from spindle centerline to end of rail. Front crossmember must be welded to frame rails buy installer.
Used In 36-400-6 KIT
SKU: 36-400-6$814.05 $732.65 10% off! -
Front Frame Kits, S&W Made Parts
A-Arm Frame Rails 55-3/16 Hub to Hub
Part# 36-400-3
55-3/16″ hub to hub
2 x 3 x 120 wall frame rails , x-member, 3/16″thick suspension brackets, Includes frame rails with a-arm brackets and shock support brackets welded on. Rack crossmember with rack mount welded on. Frame “X” brace, pre-notched to fit 55-3/16″ hub to hub, 27″ outside 23″ inside. Overall length 100″. 88″ from spindle centerline to end of rail. Front crossmember must be welded to frame rails buy installer.
Used In 36-400-3 KIT
SKU: 36-400-3$814.05 $732.65 10% off! -
Front Frame Kits, S&W Made Parts
A-Arm Frame Rails 58-3/16 Hub to Hub
Part# 36-400
58-3/16″ hub to hub
2 x 3 x 120 wall frame rails , x-member, 3/16″thick suspension brackets, Includes frame rails with a-arm brackets and shock support brackets welded on. Rack crossmember with rack mount welded on. Frame “X” brace, pre-notched to fit 58-3/16″ hub to hub, 30″ outside 26″ inside. Overall length 100″. 88″ from spindle centerline to end of rail. Front crossmember must be welded to frame rails buy installer.
Used In 36-400KIT
SKU: 36-400$814.05 $732.65 10% off! -
Front Frame Kits, S&W Made Parts
Bolt-In Front End Frame 67 – 69 Camaro / 68 – 74 Nova
Part# 36-420
1967-1969 Camaro 1968-1974 Nova bolt-on front end kit. SW Race Cars all new, bolt-in front end kit, extreme-duty, a-arm front frame suspension package is specifically designed to bolt to the stock mounts. Completely jig welded. Has body and radiator support mounts.NOTE: shown with optional front and mid plates, works with 8″ balancer on big block Chevy , 7″ maximum on small block. This frame features 2″ x 3″ mandrel formed frame rails, made from heavy duty .120″ wall tubing. All brackets are precision,, water jet cut from 3/16″ steel. More support comes from a pair of  front, sub frame supports, to tie into your roll cage and a pair of shock support tubes, (not shown in photo).
SKU: 36-420$2,101.95 $1,891.76 10% off! -
Front Frame Kits, Cage Upgrades & Funny Car Cages, S&W Made Parts
Front Sub Frame Support Bars For A-Arm Suspension DOM
Front Frame Kits, Cage Upgrades & Funny Car Cages, S&W Made PartsFront Sub Frame Support Bars For A-Arm Suspension DOM
Part# 13-356
1 3/4″ X .120″ DOM Mild Steel. Converts 10pt to 12pt, goes through firewall, Includes 2) 24″ long support tubes and 2) bents bars 46″ from end to bend, 65 degree bend, 17″ from bend to end.
SKU: 13-356$94.95 $85.46 10% off! -
Front Frame Kits, Cage Upgrades & Funny Car Cages, S&W Made Parts
Front Sub Frame Support Bars For A-Arm Suspension EWS
Front Frame Kits, Cage Upgrades & Funny Car Cages, S&W Made PartsFront Sub Frame Support Bars For A-Arm Suspension EWS
Part# 13-350
1 5/8″ x .134″ Mild Steel. Converts 10-point to 12-point, goes through firewall, Includes 2) 24″ long support tubes and 2) bents bars 46″ from end to bend, 65 degree bend, 17″ from bend to end.
SKU: 13-350$66.95 $60.26 10% off! -
Front Frame Kits, Cage Upgrades & Funny Car Cages, S&W Made Parts
Front Sub Frame Supports Chromoly For Strut Suspension
Front Frame Kits, Cage Upgrades & Funny Car Cages, S&W Made PartsFront Sub Frame Supports Chromoly For Strut Suspension
Part# 13-616
1 5/8 X 0.083 chromoly, converts 10-point 10 14-point. goes through firewall. Designed for strut front end
SKU: 13-616$132.95 $119.66 10% off! -
Front Frame Kits, S&W Made Parts
Round Tube Strut Front Frame Package – Chrome Moly Steel for Stud Mount struts
Front Frame Kits, S&W Made PartsRound Tube Strut Front Frame Package – Chrome Moly Steel for Stud Mount struts
Part# 36-502S
SW’s round tube strut front frame is designed to simplify installation for the do-it yourselfer. This frame package features 1-5/8″ chromoly frame rails, front sub frame supports, pre-notched “k type” crossmember, rack pinion mount brackets, lower control arm mounts and upper strut mounts. Fits any Strange “stud mount” strut package
SKU: 36-502S$410.15 $369.14 10% off! -
Front Frame Kits, S&W Made Parts
Round Tube Strut Front Frame Package – Chromoly for Eyelet Mount Struts
Front Frame Kits, S&W Made PartsRound Tube Strut Front Frame Package – Chromoly for Eyelet Mount Struts
Part# 36-50E
SW’s round tube strut front frame is designed to simplify installation for the do-it yourselfer. This frame package features 1-5/8″ chromoly frame rails, front sub frame supports, pre notched “k type” crossmember, rack pinion mount brackets, lower control arm mounts and upper strut mounts. Fits any Strange “eye mount” strut package
SKU: 36-502E$410.15 $369.14 10% off! -
Front Frame Kits, S&W Made Parts
Round Tube Strut Front Frame Package – Mild Steel For Eye Mount Struts
Front Frame Kits, S&W Made PartsRound Tube Strut Front Frame Package – Mild Steel For Eye Mount Struts
Part# 36-501E
SW’s round tube strut front frame is designed to simplify installation for the do-it yourselfer. This frame package features 1-5/8″ mild steel frame rails, front sub frame supports, pre notched “k type” crossmember, rack pinion mount brackets, lower control arm mounts and upper strut mounts. Fits any Strange “eye mount” strut package
SKU: 36-501E$304.15 $273.74 10% off! -
Front Frame Kits, S&W Made Parts
Round Tube Strut Front Frame Package – Mild Steel For Stud Mount Struts
Front Frame Kits, S&W Made PartsRound Tube Strut Front Frame Package – Mild Steel For Stud Mount Struts
Part# 36-501S
SW’s round tube strut front frame is designed to simplify installation for the do-it yourselfer. This frame package features 1-5/8″ mild steel frame rails, front sub frame supports, pre notched “k type” crossmember, rack pinion mount brackets, lower control arm mounts and upper strut mounts. Fits any Strange “stud mount” strut package
SKU: 36-501S$337.05 $303.35 10% off!
