Steering
Steering Racks, Columns & Accessories Categories
Steering Racks, Columns & Accessories
Showing 1–24 of 66 results
-
S&W Made Parts, Steering & Pedals, Columns, Accessories
3-5 Hole Steering Wheel Adapter
Part#95-407
Used to bolt Grant “GT” Wheel to Wilwood 3 hole quick disconnect (95-400)
Includes 3/8″ 6061 Aluminum Adapter, (3) 5/16 Flat Head Bolts to attach adapter to quick disconnect
Screw for steering wheel not includedSKU: 95-407 -
K-Member, Front Suspension & Rear Suspension Packages, S&W Made Parts, Racks
67-69 Camaro & 68-74 Nova Rack & Pinion Mounting Kit
K-Member, Front Suspension & Rear Suspension Packages, S&W Made Parts, Racks67-69 Camaro & 68-74 Nova Rack & Pinion Mounting Kit
Part# 35-371
Converts stock rear steer to rack & pinion front steer. removal of stock lower control arm crossmember required. Replacement removable tubular crossmember under engine included. Also includes rack pinion mounting bracket, billet aluminum pinto rack mount clamp, tie rods, diagonal brace gussets and crossmember cap off plates with integral tie down loops and hardware. Cutting, fitting welding required.
Note” pinto rack 35-042 and 35-078 aluminum steering arms not included
SKU: 35-371 -
-
Racks
74-78 Mustang II Manual Rack/Pinion 3″ Narrower Than Stock
Part#35-037-3
Flaming River 74-78 Mustang II manual rack pinion 3″ narrower than stock , 13″ Center to center on rack mounts 4.15 turns lock to lock rack travel 5.25″Pivot= 21.5 center to center Flaming River Rack #1502-3×3 manual rack overall length is 42″ , used in 36-400-3 package
SKU: 35-037-3 -
K-Members, Front Suspension & Rear Suspension Packages, S&W Made Parts, Columns
Bolt-in Steering Column Kit – 05 & Newer Mustang
K-Members, Front Suspension & Rear Suspension Packages, S&W Made Parts, ColumnsBolt-in Steering Column Kit – 05 & Newer Mustang
Part# 35-386
Replaces OEM steering column shaft. Outer column has mounting brackets welded on.For use with after market K-members with Pinto rack and pinion. Includes; outer column, 3/4″ upper steering shaft, 3/4″ DD lower steering shaft, (2) u-joints, mounting brackets that bolt to OEM crossmember. Firewall upper column mounting bracket can be welded to roll cage dash bar. Note: Does not include steering wheel disconnect disconnect
SKU: 35-386 -
K-Member, Front Suspension & Rear Suspension Packages, Racks
Camaro Rack And Pinion Steering Conversion Kit 1970-1981.
K-Member, Front Suspension & Rear Suspension Packages, RacksCamaro Rack And Pinion Steering Conversion Kit 1970-1981.
Part# 35-046
Rack and Pinion Steering conversion kit Camaro 1970 – 1981.S-10 Steering Kit Conversion includes :Custom Narrowed Pinto Style Manual Rack, Bump Steer Kit, Rack Clamp and Rack Mount Plate, Steering Shaft and Shaft Brace, 3 Chrome-Moly U-Joints, Welding Required, saves 35 lbs. over the original steering
SKU: 35-046 -
Combo Kits, Columns
Door Car Steering Combo Kit
Part# COMBO-KIT-2
Combo Kit includes, Steering Column Kit, Quick Disconnet, Steering Column Mounting Kit and Grant Steering Wheel. This Kit is designed to replace factory steering column from rack or steering box to steering wheel. Standard Steering Column Kit (35-372) includes sleeve to adapt steering column to rack and a single U-Joint. Pinto Steering Colum Kit (35-372PM) includes U-Joint to attached steering cloumn to rack and a second U-joint. GM Steering Column Kit (35-372GM) includes a U-Joint splined for a GM steering box and a second U-Joint.
Steering Column Kit Instructions
Steering Column Mount Kit InstructionsSKU: COMBO-KIT-2 -
-
-
-
-
-
-
Racks
Manual Rack And Pinion Conversion Kit 64 – 67 GM A-Body
Part# 35-3173-1
1964 – 1967 GM A-BODY, CHEVELLE, CUTLASS, SKYLARK, GTO KIT INCLUDES BUMP STEER KIT RACK CLAMP AND RACK MOUNT PLATE 3 CHROME MOLY U JOINTS STEERING SHAFT AND SHAFT BRACE BILLET ALUM STEERING ARMS CUSTOM NARROWED PINTO STYLE MANUAL RACK WELD IN RACK!!!!
SKU: 35-3173-1
