Lights & Switches & Buttons
Lights & Switches & Trans Brake Buttons
Showing 1–24 of 28 results
-
Lights & Switches & Trans Brake Buttons, Steering & Pedals
(2) Button Mount – Grant GT Steering Wheel
Lights & Switches & Trans Brake Buttons, Steering & Pedals(2) Button Mount – Grant GT Steering Wheel
Part# 85-013
(2) 3/4″ BUTTON HOLES 5-HOLE STEERING WHEEL MOUNTING PATTERN WORKS with GRANT SUPER GAS WHEEL 35-773, 1/8″ ALUM, BENT TO MATCH WHEEL SPOKES
SKU: 85-013$36.90 -
Lights & Switches & Trans Brake Buttons, Steering & Pedals
(4) Button Mount – Grant GT Steering Wheel
Lights & Switches & Trans Brake Buttons, Steering & Pedals(4) Button Mount – Grant GT Steering Wheel
Part# 85-012
1/8″ ALUMINUM MOUNTING HOLE PATTERN MATCHES 60-304 STEERING WHEEL TAB, PILOT HOLES FOR BUTTONS, CUSTOMER TO DRILL FINISH HOLES (2) HOLES ABOVE SPOKES, (2) HOLES BELOW SPOKES. ALL HOLES INSIDE WHEEL
SKU: 85-012$25.16 -
Lights & Switches & Trans Brake Buttons
Battery/Alternator Disconnect Switch, Moroso #74108
Part#85-256
Moroso switch #74108 Can mount in original On/Off Switch locations 4-Pole Switch simultaneously disconnects the battery and alternator feed w/o relays Fits up to 1/4″ Thick Mounting Panels Includes Switch Position Decal and Switch Location Decal
SKU: 85-256$114.18 -
Lights & Switches & Trans Brake Buttons, Steering & Pedals
Button Mount – Grant D-Wheel, 3 Button
Part# 85-008
Button Mount – Grant D-wheel, 3 BUTTON, 1/8″ aluminum, mounting hole pattern matches 60-304 steering wheel tab, pilot holes for buttons, customer drill to finish holes, button hole are above spokes, inside of wheel.
SKU: 85-008$25.16 -
Lights & Switches & Trans Brake Buttons, S&W Made Parts
Dragster Cockpit Master Disconnect Handle Kit
Lights & Switches & Trans Brake Buttons, S&W Made PartsDragster Cockpit Master Disconnect Handle Kit
Part# 85-248
Bent tubing for activating master disconnect. 33″ from bend to end. Kit includes: handle/ linkage, rod end, guide loop and hardware. Does not include 85-250 switch.
Works with 85-241 disconnect kit
SKU: 85-248$60.95 -
Brackets & Tabs & Bottle Clamps, Lights & Switches & Trans Brake Buttons, S&W Made Parts
Dragster Light & Master Disconnect Switch Mount
Brackets & Tabs & Bottle Clamps, Lights & Switches & Trans Brake Buttons, S&W Made PartsDragster Light & Master Disconnect Switch Mount
Part# 85-226
16 Gauge mild steel with 3/4 hole for switch and 2.22″ light hole
SKU: 85-226$19.75 -
Lights & Switches & Trans Brake Buttons, S&W Made Parts
Master Switch Remove Disconnect Kit – With Light Mount
Lights & Switches & Trans Brake Buttons, S&W Made PartsMaster Switch Remove Disconnect Kit – With Light Mount
Part# 85-240 Includes handle with S&W logo, (2) cable mounts, switch mount, switch throw arm, rod end and hardware. 85-240 instructions
SKU: 85-240$116.55 -
Accessories, Digital Delay, Lights & Switches & Trans Brake Buttons
Megadial Chromed 4 Digit With Cable And Controller (Blue Letters)
Accessories, Digital Delay, Lights & Switches & Trans Brake ButtonsMegadial Chromed 4 Digit With Cable And Controller (Blue Letters)
Part# 85-932
Includes chromed box, Mega Dial board, wire & connectors
Biondo Mega Dial digital ET dial-in boards will display your dial-in up to the tower, even in direct sunlight. They feature a very low current draw–less than 0.50 amps when in bright mode, and less than 0.25 amps when set to dim–so they can be connected to the master cut-off switch without having to turn it off between rounds. These dial-in boards have the ability to store two different times in memory, allowing for large number changes without a lot of wasted scrolling. They include a control head unit with a lighted LCD display for easy viewing, day or night. You can choose any dial-in from 0.00 to 19.99, and the lock feature keeps you from mistakenly changing the dial-in. Compatible with both 12 V and 16 V electrical systems, Biondo Racing Mega Dial digital ET dial-in boards will make it easier than ever to adjust and display the right dial-in, round after round.
SKU: 85-932$450.45 -
Lights & Switches & Trans Brake Buttons
Push-Pull Battery Disconnect Kit
Part# 85-249
Allows you to mount a Battery Disconnect Switch No. 85-250 (not included) to a roll cage tube with a weld-on bracket, then actuate it with this T-handle kit protruding through the rear panel Comes with brackets, swing arm linkage, 18 long aluminum tube actuator link, all necessary bushings and fasteners, and complete instructions Aluminum parts are black anodized ”
SKU: 85-249$92.05
Showing 1–24 of 28 results