Fuel System
Fuel System Categories
Fuel System
Showing 1–24 of 58 results
-
-
-
Fuel Pumps & Accessories
Aeromotive 11209 H/O Fuel Pump
Part# 94-280
Ideal for carbureted power plants not using a separate fuel pressure regulator. The H/O Fuel Pump is designed for engines making 200-600 HP and is ideal for street cars and mild race cars alike. Similar to our SS Fuel Pump (P/N 11203), but internally regulated to 7 PSI.• P/N 11209 features 3/8” NPT inlet and outlet ports.• Durable billet construction.• Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps.• Internally regulated to 7 PSI, eliminating the need for a separate regulator on most carburetors.• Rated for continuous duty, the pumping mechanism features a composite rotor, stainless steel vanes and heat treated steel top and bottom plates for durability.
SKU: 94-280 -
Fuel Pumps & Accessories
AEROMOTIVE 2 PORT REGULATOR
Specifically designed for carbureted street or racing engines, these adjustable regulators offer higher flow, quicker response and less pressure creep than competing two-port designs. Ideal for dedicated nitrous applications. These regulators are used by many of the NASCAR® teams.• Adjustable from 5-12 PSI.• P/N 13201 provides ORB-06 inlet and outlet ports.• 1/8” NPT gauge port.• Regulators re-seat after the carburetor needle shuts down, preventing pressure creep.• Includes mounting bracket.
SKU: 94-281 -
Fuel Pumps & Accessories
Aeromotive 4 Port Regulator
Part# 94-401
Revolutionary design provides two independent pressure adjustments; one adjustment for idle and one for wide open throttle. Engineered for use with variable volume pumps tied to engine RPM. This regulator creates the smoothest and most repeatable fuel curve from idle to wide open throttle of any bypass system.• ORB-10 return port.• P/N 13209 provides (1) ORB-08 inlet and (3) ORB-08 outlet ports.• Can be configured for single or dual carbureted engines and provides superior pressure control and flow when installed before the carburetor or after a fuel log.• Also available with a single inlet port for fuel logs. (P/N 13214)- provides ORB-10 inlet and return ports.
SKU: 94-401 -
Fuel Pumps & Accessories
AEROMOTIVE A1000 FUEL PUMP
Fuel Injected Engines:up to 1300 HP – naturally aspiratedup to 1000 HP – forced air inductionCarbureted Engines:up to 1500 HP – naturally aspiratedup to 1200 HP – forced air induction• ORB-10 inlet and outlet ports.• For EFI applications use regulator P/N 13101 or P/N 13109.• For carbureted applications use regulator P/N 13204.• Fully submersible for custom, in-tank placement.• Perfect for “blow-through” carbureted engines up to 1200 HP.• Billet Speed Pump Controller (P/N 16306) recommended for EFI street applications.
SKU: 94-402 -
Fuel Pumps & Accessories
AEROMOTIVE A2000 FUEL PUMP
14 AMP – #10 INLET OR OUTLET – GAS OR ALCOHOLFrom Stock Eliminator to Pro Mod, the Aeromotive A2000 is a versatile force to reckoned with and stands alone as a “big” carbureted fuel pump.The A2000 flows enough fuel to support the world’s quickest nitrous Pro-mods on gasoline, and is the industry’s only fuel pump that uses a true diaphragm controlled, adjustable bypass valve, integral to the pump. This design dampens pressure spikes, delivering smoother, more controlled flow and pressure, ensuring more consistent E.T.s and win lights.• High torque, low RPM motor design delivers more than 350 GPH free flow, while developing less current draw than any other pump in its class.• Adjustable diaphragm bypass valve outperforms ineffective poppet designs, minimizing flow loss and pressure fluctuation to the regulator and carburetor.• ORB-10 inlet and outlet ports with ORB-8 return and 1/8” NPT gauge port.• Proprietary seal design eliminates leakage.• Alcohol compatible.• Multiple bolt patterns on the bottom of the pump body fit many chassis mounting options.
SKU: 94-400 -
Fuel Pumps & Accessories
AEROMOTIVE FILTER, IN-LINE (AN-10) 10 MIRCRON
An inexpensive insurance policy to protect your investment., Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components., • High-flow, 10-micron fabric (fine) replaceable element., • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI., • Compact size: 5.5” long x 2” diameter, • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. • All filter assemblies feature an O-ring for positive sealing in high pressure applications., • CNC-machined from 6061-T6 aircraft aluminum., • Bright dip red anodized finish for a corrosion resistant, show car quality appearance.,
SKU: 95-405 -
Fuel Pumps & Accessories
AEROMOTIVE FILTER, INLINE (AN-10) 100 MICRON
An inexpensive insurance policy to protect your investment.Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components.• High-flow, 100-micron stainless steel (coarse) cleanable element.• Flows 2,000 lb/hr with a pressure drop of less than 1 PSI.• Compact size: 5.5” long x 2” diameter• ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings Adapters)• All filter assemblies feature an O-ring for positive sealing in high pressure applications.• CNC-machined from 6061-T6 aircraft aluminum.• Bright dip red anodized finish for a corrosion resistant, show car quality appearance.
SKU: 94-406 -
Fuel Cells & Mounts
Black Cap for Fuel Cell (12 Hole)
Part#95-327
Fuel cell cap kits are designed as a direct replacement for any Jaz, Harwood, or RCI fuel cell with a 5.343” 12 hole bolt circle. Made from 6061 aluminum and anodized for corrosion protection. Each cap is o-ring sealed and comes complete with stainless hardware.
Other colors available. Please ask.
SKU: 95-327 -
Fuel Cells & Mounts
Black Cap for Jaz Fuel Cells
Part#95-322
Fuel cell cap kits are designed as a direct replacement for any Jaz, Harwood, or RCI fuel cell with a 4.438” 6 hole bolt circle. Made from 6061 aluminum and anodized for corrosion protection. Each cap is o-ring sealed and comes complete with stainless hardware.
SKU: 95-322 -
Fuel Cells & Mounts
Blue Cap for Fuel Cell (12 Hole)
Part#95-329
Fuel cell cap kits are designed as a direct replacement for any Jaz, Harwood, or RCI fuel cell with a 5.343” 12 hole bolt circle. Made from 6061 aluminum and anodized for corrosion protection. Each cap is o-ring sealed and comes complete with stainless hardware.
Other colors available. Please ask.
SKU: 95-329
