GM S10, A-Body, G-Body Bolt Ons
GM A-Body & G-Body Bolt-on Parts
Showing 1–24 of 42 results
-
GM A-Body & G-Body Bolt-on Parts, S&W Made Parts, Direct Fit/Bolt On
64 – 72 GM A-Body Lower Control Arms Street
GM A-Body & G-Body Bolt-on Parts, S&W Made Parts, Direct Fit/Bolt On64 – 72 GM A-Body Lower Control Arms Street
Part# 40-620
1964-1972 GM “A” Body (Chevelle) Standard Lower Control Arms
replaces lower control arms
Made from heavy duty wall DOM steel tubing, includes poly bushings, steel sleeves and hardware
22″ center to centerSKU: 40-620 -
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Chrome Moly Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Chrome Moly Lower Control Arms
Part# 40-602CM
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .083″ wall chrome moly steel tubing. High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated silver for a long lasting, durable and attractive finish. Also fits 78-82 Malibu and 78-88 Monte Carlo other GM G-bodies.
SKU: 40-602CM -
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Part# 40-602
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602 -
Lower Control Arms, Component Clearance, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms (Clearance)
Lower Control Arms, Component Clearance, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms (Clearance)
Part# 40-602-1
NOTE: THESE ARE NEW BUT HAS SCRACTHED POWDER COATING FROM DSPLAY (ONLY ONE AVAILABLE)
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602-1 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 55-57 Chevy 3″ Narrower Than Stock Width
Control Arms, GM A-Body & G-Body Bolt-on PartsFatman GM Front Control Arms 55-57 Chevy 3″ Narrower Than Stock Width
Part# 36-600
1955–1957 Chevrolet GTECH Control Arms 3″ narrower than Stock Width
Tested and quality proven GTECH 1955–1957 Chevrolet control arms are available for your Tri-5 Chevy. Each set of four comes complete with ball joints and OEM rubber bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- Available in stock or 1-½” narrowed per side widths for tire clearance for fatter fires
- All new top quality ball joints installed
- OEM rubber bushings supplied (to be installed on your original shafts) to maintain insulation from road shock. We feel that urethane bushings in this application are too harsh for decent ride quality
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) suppression
- Easy conversion to coilovers or air ride
SKU: 36-601 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 55-57 Chevy Stock Width
Part# 36-600
1955–1957 Chevrolet GTECH Control Arms Stock Witdh
Tested and quality proven GTECH 1955–1957 Chevrolet control arms are available for your Tri-5 Chevy. Each set of four comes complete with ball joints and OEM rubber bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- Available in stock or 1-½” narrowed per side widths for tire clearance for fatter fires
- All new top quality ball joints installed
- OEM rubber bushings supplied (to be installed on your original shafts) to maintain insulation from road shock. We feel that urethane bushings in this application are too harsh for decent ride quality
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) suppression
- Easy conversion to coilovers or air ride
SKU: 36-600 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 58 – 64 Chevy
Part# 36-602
1958–1964 Chevrolet GTECH Control Arms
Tested and quality proven GTECH 1958–1964 Chevrolet control arms are available for your full size Chevrolet. Each set of four comes complete with ball joints and OEM rubber bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- All new top quality ball joints installed
- OEM rubber bushings supplied to maintain insulation from road shock. We feel that urethane bushings in this application are too harsh for decent ride quality
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) suppression
- Easy conversion to coilovers or air ride
SKU: 36-602 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 64-72 GM A-Body 1″ Narrower than Stock
Control Arms, GM A-Body & G-Body Bolt-on PartsFatman GM Front Control Arms 64-72 GM A-Body 1″ Narrower than Stock
Part# 36-605
1964–1972 Chevrolet Chevelle GTECH Control Arms 1″ narrower than stock
Tested and quality proven GTECH 1964–1972 Chevrolet Chevelle control arms are available for your Chevelle. Each set of four comes complete with ball joints and urethane bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- Available in stock or 1” narrowed per side widths for tire clearance for fatter fires
- All new top quality ball joints installed
- Urethane bushings installed
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) supression
- Easy conversion to coilovers or air ride
SKU: 36-605 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 64-72 GM A-Body Stock Width
Control Arms, GM A-Body & G-Body Bolt-on PartsFatman GM Front Control Arms 64-72 GM A-Body Stock Width
Part# 36-604
1964–1972 Chevrolet Chevelle GTECH Control Arms
Tested and quality proven GTECH 1964–1972 Chevrolet Chevelle control arms are available for your Chevelle. Each set of four comes complete with ball joints and urethane bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- Available in stock or 1” narrowed per side widths for tire clearance for fatter fires
- All new top quality ball joints installed
- Urethane bushings installed
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) supression
- Easy conversion to coilovers or air ride
SKU: 36-604 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 67 – 69 Camaro 3″ Narrower Than Stock
Control Arms, GM A-Body & G-Body Bolt-on PartsFatman GM Front Control Arms 67 – 69 Camaro 3″ Narrower Than Stock
Part# 36-607
1967 – 1969 Chevy Camaro Control Arms GTECH 3″ narrower than stock
Tested and Quality Proven GTECH 1967 – 1969 Chevy Camaro Control Arms are available for your Chevy. Each set of four comes complete with Ball Joints, Shafts and Bushings in primer to paint your choice of color. Optional Black or Silver powder coating available for GTECH 1967 – 1969 Chevy Camaro Control Arms for an additional fee.
- Thousands of our GTECH control arm sets have been installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- Urethane upper and lower bushings for control
- American made TIG welded construction for top quality
- 1” x .188″ wall DOM tubing for maximum strength with minimum bulk
- Available in stock or 1 ½” narrowed (per side) widths for clearance for fatter tires and subframed hot rods
- All new top quality ball joints installed
- Stamped 3/16” lower spring cup mounts a urethane lower spring insulator for NVH suppression (Noise Vibration Harshness)
- Standard length arms have sway bar tabs installed (narrowed arms will require modification to the sway bar and its mounts)
- Easy conversion to coilovers or air ride
SKU: 36-607 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 67 – 69 Chevy Camaro Stock Width
Control Arms, GM A-Body & G-Body Bolt-on PartsFatman GM Front Control Arms 67 – 69 Chevy Camaro Stock Width
Part# 36-606
1967 – 1969 Chevy Camaro Control Arms GTECH
Tested and Quality Proven GTECH 1967 – 1969 Chevy Camaro Control Arms are available for your Chevy. Each set of four comes complete with Ball Joints, Shafts and Bushings in primer to paint your choice of color. Optional Black or Silver powder coating available for GTECH 1967 – 1969 Chevy Camaro Control Arms for an additional fee.
- Thousands of our GTECH control arm sets have been installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- Urethane upper and lower bushings for control
- American made TIG welded construction for top quality
- 1” x .188″ wall DOM tubing for maximum strength with minimum bulk
- Available in stock or 1 ½” narrowed (per side) widths for clearance for fatter tires and subframed hot rods
- All new top quality ball joints installed
- Stamped 3/16” lower spring cup mounts a urethane lower spring insulator for NVH suppression (Noise Vibration Harshness)
- Standard length arms have sway bar tabs installed (narrowed arms will require modification to the sway bar and its mounts)
- Easy conversion to coilovers or air ride
SKU: 36-606 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
GM FRONT LOWER RACE CONTROL ARMS 64 – 72 GM A-BODY (CHEVELLE, GTO, 442, BUICK GS, ECT.)
Control Arms, GM A-Body & G-Body Bolt-on PartsGM FRONT LOWER RACE CONTROL ARMS 64 – 72 GM A-BODY (CHEVELLE, GTO, 442, BUICK GS, ECT.)
Part# 36-52337
QA-1 #52337, GM A-BODY RACE FRONT LOWER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-168 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. UPPER BARS PURCHASED SEPARATELY)
SKU: 36-52337 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
GM FRONT UPPER RACE CONTROL ARMS 64 – 72 A-BODY (CHEVELLE,GTO,442,BUICK GS, ECT)
Control Arms, GM A-Body & G-Body Bolt-on PartsGM FRONT UPPER RACE CONTROL ARMS 64 – 72 A-BODY (CHEVELLE,GTO,442,BUICK GS, ECT)
Part# 36-52322
QA-1 #52322, GM A-BODY RACE FRONT UPPER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-168 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. LOWER BARS PURCHASED SEPARATELY)
SKU: 36-52322 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
GM FRONT UPPER RACE CONTROL ARMS 67 – 69 GM F-BODY (CAMARO, FIREBIRD, 68 – 74 NOVA)
Control Arms, GM A-Body & G-Body Bolt-on PartsGM FRONT UPPER RACE CONTROL ARMS 67 – 69 GM F-BODY (CAMARO, FIREBIRD, 68 – 74 NOVA)
Part# 36-52317
QA-1 #52317 GM F-BODY RACE FRONT UPPER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-168 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. LOWER BARS PURCHASED SEPARATELY)
SKU: 36-52317 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
GM FRONT UPPER RACE CONTROL ARMS 70 – 81 GM F-BODY (CAMARO, FIREBIRD)
Control Arms, GM A-Body & G-Body Bolt-on PartsGM FRONT UPPER RACE CONTROL ARMS 70 – 81 GM F-BODY (CAMARO, FIREBIRD)
Part# 36-52318
QA-1 #52318, GM F-BODY RACE FRONT UPPER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-203 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. LOWER BARS PURCHASED SEPARATELY)
SKU: 36-52318 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
GM FRONT UPPER RACE CONTROL ARMS 78 – 88 G-BODY (MALIBU, MONTE CARLO, CUTLASS, REGAL, ECT)
Control Arms, GM A-Body & G-Body Bolt-on PartsGM FRONT UPPER RACE CONTROL ARMS 78 – 88 G-BODY (MALIBU, MONTE CARLO, CUTLASS, REGAL, ECT)
Part# 52965
QA-1 #52965, GM G-BODY RACE FRONT UPPER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-203 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. LOWER BARS PURCHASED SEPARATELY)
SKU: 36-52965 -
GM A-Body & G-Body Bolt-on Parts, S&W Made Parts, Direct Fit/Bolt On
GM G-Body Adjustable Competition Upper Control Arm
GM A-Body & G-Body Bolt-on Parts, S&W Made Parts, Direct Fit/Bolt OnGM G-Body Adjustable Competition Upper Control Arm
Part# 40-622
78-82 Malibu, 78-88 Monte Carlo upper control arms with hex adjuster for setting pinion angle, Chromoly rod end with steel spacers at front of link, aluminum bushings with steel sleeves replaces stock bushings on rear. Includes grade 8 bolts and black powder coated
SKU: 40-622 -
GM A-Body & G-Body Bolt-on Parts, S&W Made Parts, Direct Fit/Bolt On
GM G-Body Adjustable Street Upper Control Arm
GM A-Body & G-Body Bolt-on Parts, S&W Made Parts, Direct Fit/Bolt OnGM G-Body Adjustable Street Upper Control Arm
Part# 40-621
Fits 78-82 Mailbu, 78-88 Monte Carlo, replaces stock upper control arms (2) piece adjustable link, front has poly bushings, black powder coated, grade 8 hardware, Energy Suspension bushings included
SKU: 40-621
