Mopar Dodge Plymouth Parts
Mopar Dodge Plymouth Bolt-on Parts
Showing 1–24 of 38 results
-
Mopar Dodge Plymouth Bolt-on Parts, Front
62-’72 ROADRUNNER/BELVADERE/CHALLANGER 4 PISTON FRONT DRAG BRAKE KIT
Mopar Dodge Plymouth Bolt-on Parts, Front62-’72 ROADRUNNER/BELVADERE/CHALLANGER 4 PISTON FRONT DRAG BRAKE KIT
Part# 55-AC-290
62-72 Belvedere, Challenger with 10″ drum, includes Billet Aluminum 4 Piston Calipers, Billet Aluminum Mounting Brackets, Grade 8 Hardware, Billet Aluminum Hubs with screw on dust caps, Bearings and Seals, Brake Pads, 10 1/4″ Diameter Drilled Rotors, 1/2″ Studs, 3″ long
SKU: 55-AC-290 -
Control Arms, Mopar Dodge Plymouth Bolt-on Parts
62-72 MOPAR B-BODY / 70-74 E-BODY LOWER A-ARM KIT QA-1 #52308
Control Arms, Mopar Dodge Plymouth Bolt-on Parts62-72 MOPAR B-BODY / 70-74 E-BODY LOWER A-ARM KIT QA-1 #52308
Part# 35-52308
62-72 MOPAR B-BODY / 70-74 E-BODY LOWER A-ARM KIT QA-1 # 52308, CONTROL ARMS ARE DIRECT BOLT-IN ON THE FACTORY K-MEMBER KIT INCLUDED BUSHINGS PIVOT ARMS AND NUTS RECOMMENDED FOR 1962-70 B-BODY WITH NO SWAY BAR OR E-BODY SWAY BAR AND QA1 K-MEMBER.  FOR 70-74  MOPAR E-BODY WILL WORK WITH E-BODY SWAY BAR AND 1971-72 B-BODY SWAY BAR
SKU: 35-52308 -
Control Arms, Mopar Dodge Plymouth Bolt-on Parts
62-72 MOPAR B-BODY & 70-74 E-BODY UPPER A-ARM KIT
Part# 35-52305
62-72 MOPAR B-BODY/70-74 E-BODY UPPER A-ARM KIT QA-1 #52305, TUBULAR CONSTRUCTION, BLACK POWDER COAT POLYURETHANE INNER PIVOT BUSHINGS CONTROL ARMS INCREASE CASTER BY APPROXIMATELY 3-DEGREES EACH SET COMES WITH BALL JOINTS FITS 62-72 MOPAR B-BODY AND 70-74 MOPAR E-BODY
SKU: 35-52305 -
Control Arms, Mopar Dodge Plymouth Bolt-on Parts
64-72 MOPAR A-BODY / 73-76 A-BODY LOWER A-ARM KIT QA-1 #52307
Control Arms, Mopar Dodge Plymouth Bolt-on Parts64-72 MOPAR A-BODY / 73-76 A-BODY LOWER A-ARM KIT QA-1 #52307
Part# 35-52307
64-72 MOPAR A-BODY / 73-76 A-BODY LOWER A-ARM KIT QA-1 # 52307 DIRECT BOLT-IN ON FACTORY K-MEMBER INCLUDED BUSHINGS, PIVOT ARMS AND NUTS WORKS WITH THE 1964-66 A-BODY WITH NO SWAY BAR AND 1967-73 A-BODY WITH THE 1973-76 SWAY BAR OR “FLAT BAR”
SKU: 35-52307 -
Control Arms, Mopar Dodge Plymouth Bolt-on Parts
64-72 MOPAR A-BODY UPPER A-ARM KIT QA-1 #52303
Part# 35-52303
64-72 MOPAR A-BODY UPPER A-ARM KIT, QA-1 # 52303, TUBULAR CONSTRUCTION, BLACK POWDER COAT POLYURETHANE INNER PIVOT BUSHINGS CONTROL ARMS INCREASE CASTER BY APPROXIMATELY 3-DEGREES EACH SET COMES WITH BALL JOINTS
SKU: 35-52303 -
-
Mopar Dodge Plymouth Bolt-on Parts
67-72 MOPAR A-BODY K-MEMBER SMALL BLOCK QA-1 #52313
67-72 MOPAR A-BODY K-MEMBER SMALL BLOCK QA-1# 52313, K-MEMBER IS DESIGNED FOR 1967-72 SMALL BLOCK ENGINE MOUNTSMUST USE A 1973-76 A-BODY SWAY BAR. IT US NECESSARY TO RELOCATE THE SWAY BAR TABS ON THELOWER CONTROL ARMSPART WEIGHTS 42LBS
SKU: 35-52313 -
Control Arms, Mopar Dodge Plymouth Bolt-on Parts
73-76 MOPAR A-BODY UPPER A-ARM KIT QA-1 #52301
Part# 35-52301
73-76 MOPAR A-BODY UPPER A-ARM KIT QA-1 # 52301, TUBULAR CONSTRUCTION, BLACK POWDER COAT POLYURETHANE INNER PIVOT BUSHINGS CONTROL ARMS INCREASE CASTER BY APPROXIMATELY 3-DEGREES EACH SET COMES WITH BALL JOINTS THIS CONTROL ARM IS ONLY FOR FACTORY CARS AND ANY A-BODY THAT WAS SWAPPED TO DISC BRAKES WITH FACTORY PARTS. (LARGE BALL JOINTS)
SKU: 35-52301 -
Mopar Dodge Plymouth Bolt-on Parts, Rear
AEROSPACE REAR DRAG BRAKE KIT MOPAR/DANA 4 Piston Rear
Part# 55-AC-525
Aerospace # AC-525, Drag race rear brake kit. for Mopar/Dana housing ends –Â 4 Piston Billet Aluminum Calipers, For 1/2″ studs, Mounting Brackets, Grade 8 Hardware, Billet Aluminum Brake Hats with multi bolt patterns, Brake Pads, 11 3/8″ Diameter Drilled Rotors
SKU: 55-AC-525 -
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
FRAME RAILS BARRACUDA 64 – 69, DART 64 – 76, ALL DEMONS, ALL DUSTERS-COIL SPRING
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsFRAME RAILS BARRACUDA 64 – 69, DART 64 – 76, ALL DEMONS, ALL DUSTERS-COIL SPRING
Part# 10-031
 “A” Body . 64-69 Barracuda, 64-76 Dart , all Demons, all dusters -Coil spring , 2″ x 3″ x .083″ mild steel , SOLD AS (1) PAIR, SW direct fit rear frame rails are designed to follow the original rear floor contour and install with minimal cutting or modification. Use part number 10-631 for frame connector Note O.E.M. Replacement rails Â
SKU: 10-031 -
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
FRAME RAILS – E BODY MOPAR COIL OVER
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsFRAME RAILS – E BODY MOPAR COIL OVER
Part# 10-035
E-Body Mopar frame rails coil over , 2″ x 3″ x .083″ Mild steel , SOLD AS (1) PAIR, SW direct fit rear frame rails are designed to follow the original rear floor contour and install with minimal cutting or modification . Use Part number 10-633 For frame connector . NOTE: THESE FRAME RAILS ARE NOT O.E.M. REPLACEMENT RAILS
SKU: 10-035 -
-
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
MOPAR “A” BODY. 64-69 BARRACUDA, 64-76 DART, ALL DEMONS, ALL DUSTERS-LEAF SPRING S&W DIRECT FIT REAR FRAME RAILS
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsMOPAR “A” BODY. 64-69 BARRACUDA, 64-76 DART, ALL DEMONS, ALL DUSTERS-LEAF SPRING S&W DIRECT FIT REAR FRAME RAILS
Part# 10-032
2″ x 3″ x .083″ Mild steel , SOLD AS (1) PAIR, Mopar “A” BODY. 64-69 Barracuda, 64-76 Dart, all Demons , All Dusters-Leaf spring SW direct fit rear frame rails are designed to follow the original rear floor contour and install with minimal cutting or modification . Use part number 10-632 FOR FRAME CONNECTOR. NOTE: THESE FRAME RAILS ARE NOT O.E.M. REPLACEMENT RAILS
SKU: 10-032 -
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
MOPAR “B” BODY FRAME RAILS COIL-OVER KIT
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsMOPAR “B” BODY FRAME RAILS COIL-OVER KIT
Part# 10-036
B-Body SW direct fit rear frame rails , 2″ x 3″ x .083″ mild steel , SOLD AS (1) PAIR, are designed to follow the original rear floor contour and install with minimal cutting or modification USE PART NUMBER 10-636 FOR FRAME CONNECTOR. NOTE: THESE FRAME RAILS ARE NOT O.E.M. REPLACEMENT RAILS
SKU: 10-036 -
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
MOPAR “E” BODY FRAME RAILS LEAF SPRING
Direct Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsMOPAR “E” BODY FRAME RAILS LEAF SPRING
Part# 10-033
Frame rails 2″ x 3″ x .083″ Mild steel , SOLD AS (1) PAIR,  Fits 70-74 with stock spring , no Supper stock spings 70-74 Barracuda -Leaf spring early Challenger-Leaf spring SW direct fit rear frame rails are designed to follow the original rear floor contour and install with minimal cutting or modification. Use part #10-633 for frame connector. NOTE These frame rails are not O.E.M. replacement rails Â
SKU: 10-033 -
S&W Direct & Universal Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
MOPAR A BODY FRAME CONNECTOR LEAF SPRING
S&W Direct & Universal Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsMOPAR A BODY FRAME CONNECTOR LEAF SPRING
Part# 10-632
FRAME CONNECTOR 2″ X 3″ X .083 MILD STEEL, MOPAR A BODY LEAF SPRING 64-69 BARRACUDA, 64-76 DART, 64-76 VALIANT ALL DUSTERS, DEMONs, SEE part#Â 10-032 FOR FRAME RAIL Â
SKU: 10-632 -
S&W Direct & Universal Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
MOPAR B BODY FRAME CONNECTOR LEAF SPRING
S&W Direct & Universal Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsMOPAR B BODY FRAME CONNECTOR LEAF SPRING
Part# 10-634
FRAME CONNECTOR 2″ X 3″ X .083 MILD STEEL, MOPAR B BODY LEAF SPRING, CORONET, SATELITE, ROAD RUNNER, CHARGER, GTTX, R/T, BELVEDERE,, Â CORDOBA, 76-78 FURY, 77-78 MONACO, 78-79 MAGNUM, Â SEE Part#Â 10-034 FOR FRAME RAILS
SKU: 10-634 -
S&W Direct & Universal Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made Parts
MOPAR E BODY FRAME CONNECTOR -LEAF SPRING
S&W Direct & Universal Fit Frame Rails, Mopar Dodge Plymouth Bolt-on Parts, S&W Made PartsMOPAR E BODY FRAME CONNECTOR -LEAF SPRING
Part# 10-633
FRAME CONNECTOR 2″ X 3″ X .083 MILD STEEL, MOPAR E BODY 70-74 BARRACUDA LEAF SPRING, EARLY CHALLENGERS LEAF SPRING. SEE part#10-033 FOR FRAME RAILS
SKU: 10-633 -
-
Mopar Dodge Plymouth Bolt-on Parts, Rear
Mopar End With Stock Axles with Drilled Rotors Rear Brake Kit
Mopar Dodge Plymouth Bolt-on Parts, RearMopar End With Stock Axles with Drilled Rotors Rear Brake Kit
Part# 55-606DM
Wilwood # 140-0260BD, Mopar ends, Drag race appications. 2.36 offset. For use with stock axles
*Must use 45-1022 bearings with snap ring. Stock axle bearings will not work!!!
SKU: 55-606DM -
