Dragster, Altered & Funny Car
Dragster, Altered & Funny Car Categories
Dragster, Altered & Funny Car
Showing 1–24 of 29 results
-
S&W Made Parts, Motor Plates & Mid Plates, Dragster
BBC Dragster Front Motor Plate – One Piece – Extra Wide Chassis
S&W Made Parts, Motor Plates & Mid Plates, DragsterBBC Dragster Front Motor Plate – One Piece – Extra Wide Chassis
Part# 05-043FW
1/4″ 6061-T6 aluminum, fit SW dragsters with 1-3/8″ frame rails 21-1/2″ center, uses water pump holes and 7/16″ lower holes
SKU: 05-043FW$162.15 -
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Motor Plates & Mid Plates, Accessories
Dragster Front Motor Mount Saddle (Pair)
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Motor Plates & Mid Plates, AccessoriesDragster Front Motor Mount Saddle (Pair)
Part# 05-076
Dragster front motor mount saddle, sold in pairs. Will fit 1 1/4″ frame rail, 3″ long, with 3/8″ hole. Made from 1 3/8 x .065 chromoly with 60-308 tab welded on.
SKU: 05-076$47.65 -
S&W Made Parts, Motor Plates & Mid Plates, Dragster
Dragster Front Motor Plate – One Piece – Big Block Chevy
S&W Made Parts, Motor Plates & Mid Plates, DragsterDragster Front Motor Plate – One Piece – Big Block Chevy
Part# 05-043F
1/4″ 6061-T6 aluminum S W dragster with 1-3/8 frame rails on 20-7/8 center, uses water pump holes and 7/16″ bolt hole at bottom
SKU: 05-043F$162.15 -
S&W Made Parts, Motor Plates & Mid Plates, Dragster
Dragster Front Motor Plate – One Piece – Small Block Chevy
S&W Made Parts, Motor Plates & Mid Plates, DragsterDragster Front Motor Plate – One Piece – Small Block Chevy
Part# 05-043F-SBC
1/4″ 6061-T6 aluminum, fits SW dragster with 1-3/8″ frame rails on 20-7/8″ centers. Uses water pump holes and lower holes
SKU: 05-043F-SBC$162.15 -
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Accessories
Frame Rail Saddle (Pair) – For 1-1/4″ Rail
Brackets & Tabs & Bottle Clamps, S&W Made Parts, AccessoriesFrame Rail Saddle (Pair) – For 1-1/4″ Rail
Part# 05-078
Dragster front motor mount saddle with out tabs, sold in pairs. Will fit 1 1/4″ frame rail, 3″ long. Made from 1 3/8 x .065 chromoly.
NOTE: 05-076 Welded saddles shown in picture.
SKU: 05-078$15.85 -
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Accessories
Frame Rail Saddles (Pair) – No Tabs For 1-3/8″ Rail
Brackets & Tabs & Bottle Clamps, S&W Made Parts, AccessoriesFrame Rail Saddles (Pair) – No Tabs For 1-3/8″ Rail
Part# 05-079
Dragster front motor mount saddle without tabs, sold in pairs. Will fit 1 3/8″ frame rail, 3″ long. Made from 1 1/2 x .065 chromoly. NOTE: 05-076 Welded saddles shown in picture.
SKU: 05-079$15.85 -
S&W Made Parts, Motor Plates & Mid Plates, Dragster
Front Motor Mount – Big Block Chevy – S&W Dragster
S&W Made Parts, Motor Plates & Mid Plates, DragsterFront Motor Mount – Big Block Chevy – S&W Dragster
Part# 05-043
(2 required) 1/4″Â 6061-T6 aluminum for SW 4-link dragster with 21″ wide shoulder hoop.
Coolant and bolts holes drilled, notched for 1-3/8″ frame rail
SKU: 05-043$24.35 -
S&W Made Parts, Other Parts, Altered & Funny Car
Front Or Mid Motor Plate To Customer Specs – 1/4″ Aluminum
S&W Made Parts, Other Parts, Altered & Funny CarFront Or Mid Motor Plate To Customer Specs – 1/4″ Aluminum
Part# 20-106
1/4″ 6061-T6 aluminum, plate not to exceed 4 square feet, Customer must send original plate for duplication
SKU: 20-106$305.25 -
S&W Made Parts, Motor Plates & Mid Plates, Dragster
Full Mid Motor Plate 1/4″ Aluminum – S&W Solid Dragster
S&W Made Parts, Motor Plates & Mid Plates, DragsterFull Mid Motor Plate 1/4″ Aluminum – S&W Solid Dragster
Part# 05-034FS
1/4″ 6061-T6 alumiunm, fits 1996 newer SW chassis, Chevy bolt pattern
SKU: 05-034FS$173.75 -
S&W Made Parts, Motor Plates & Mid Plates, Dragster
Full Mid Plate With Coil Mount – 1/4″ Alum- S&W 4-Link Dragster
S&W Made Parts, Motor Plates & Mid Plates, DragsterFull Mid Plate With Coil Mount – 1/4″ Alum- S&W 4-Link Dragster
Part# 05-034CF
Fits S&W 4-link dragsters only, 1/4″ 6061 T6Â aluminum Chevy bolt pattern, 3 or 4 screw coil mount
SKU: 05-034CF$173.75 -
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Motor Plates & Mid Plates, Dragster
Mid Motor Plate S&W Dragster 1/4″ Aluminum
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Motor Plates & Mid Plates, DragsterMid Motor Plate S&W Dragster 1/4″ Aluminum
Part# 05-034
For 1996 – newer SW dragster. Chevy bolt pattern, 1/4″ 6061 T-6 aluminum
For earlier years, need to send original plate to duplicate
SKU: 05-034$162.15 -
S&W Made Parts, Other Parts, Altered & Funny Car
Mid Plate – Chevy 2′ X 2/ X 1/4″ Alum, 6″ Crank Hole
S&W Made Parts, Other Parts, Altered & Funny CarMid Plate – Chevy 2′ X 2/ X 1/4″ Alum, 6″ Crank Hole
Part# 20-105
1/4″ 6061 aluminum plate, 24″ x 24″, 6″ crank hole, 3″ starter hole, center of crank hole 10″ up from bottom of plate. (for plate with 14-1/2″ crank hole use part # 20-108
Â
SKU: 20-105$147.25 -
S&W Made Parts, Other Parts, Altered & Funny Car
Mid Plate – Chevy- 2′ X 2′ X 1/4″ Alum. No Starter Hole
S&W Made Parts, Other Parts, Altered & Funny CarMid Plate – Chevy- 2′ X 2′ X 1/4″ Alum. No Starter Hole
Part# 20-105FC
Chevy- 2′ x 2′ x 1/4 ‘ 6061 aluminum, no starter hole, 6″ crank hole, (2) cooling holes
SKU: 20-105-FC$147.25 -
S&W Made Parts, Other Parts, Altered & Funny Car
Mid Plate – Keith Black Hemi – 2/ X 2′ X 1/4″ 6061 Aluminum
S&W Made Parts, Other Parts, Altered & Funny CarMid Plate – Keith Black Hemi – 2/ X 2′ X 1/4″ 6061 Aluminum
Part# 202-105KB
 Keith Black Hemi – 2′ x 2′ x 1/4″ 6061 aluminum plate, has 6″ crank hole (2) 2″ cooling holes, crank hole is center on plate, no starter hole.Â
SKU: 20-105KB$147.25 -
S&W Made Parts, Other Parts, Altered & Funny Car
Motor Mid Plate – Chevy 2′ X2′ X 1/4″ 6061 Alum, 14-1/2″ Crank Hole
S&W Made Parts, Other Parts, Altered & Funny CarMotor Mid Plate – Chevy 2′ X2′ X 1/4″ 6061 Alum, 14-1/2″ Crank Hole
Part# 20-108
1/4″ 6061 aluminum 24″ wide x 24″ tall, 14-1/2″ crank hole, 3″ starter hole, center of crank hole 10″ up from bottom. For plate with 6″ crank hole use Part# 20-105
SKU: 20-108$147.25 -
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Other Parts, Altered & Funny Car
Motor Mount Clamp, Fits 1-1/2″ Saddle On 1-3/8″ Frame Rail
Brackets & Tabs & Bottle Clamps, S&W Made Parts, Other Parts, Altered & Funny CarMotor Mount Clamp, Fits 1-1/2″ Saddle On 1-3/8″ Frame Rail
Part# 20-109A
Motor mount clamp, fits 1-1/2″ saddle on 1-3/8″ frame rail Â
SKU: 20-109A$10.44
