Mustang Bolt Ons 1964 & Newer – MustangGuys
Mustang Bolt-on Parts Categories
Mustang Bolt-on Parts
Showing 1–24 of 84 results
-
S&W Made Parts, Rear Firewall Kits, Aluminum Interior Kits
05-10 Mustang Rear Firewall Kit
Part# 95-118
Direct fit aluminum rear firewall kit seals both the area behind the rear seat and all holes in the rear package tray. Required by all sanctioning bodies when installing a fuel cell in the trunk or relocating the battery to the trunk.Kit includes all necessary mounting hardware. Kit does not interfere with the rear seat.
SKU: 95-118 -
-
S&W Made Parts, Upper Control Arms
1979-2004 Mustang Upper Control Arms
Part# 40-724
SW Race Cars new 79-04 Mustang upper control arms are perfect for ET bracket and Stock Eliminator racing.  Each set is custom fabricated and fully adjustable to allow the racer the ultimate in “tunability”. These arms are a direct replacement for the factory control arm and include all necessary mounting hardware  Powder coated for a long lasting, durable and attractive finish.
SKU: 40-724 -
S&W Made Parts, Upper Control Arms
2005-2011 Mustang Adjustable Drag Race Upper Control Arm
Part# 40-701
2005-2011 Mustang Adjustable Drag Race Upper Control Arm, Designed to allow adjustments to both pinion angle and instant center! Longer than stock upper link allows smoother operation throughout the rear suspension travel. A street version is also available see part # 40-704.
SKU: 40-701 -
S&W Made Parts, Upper Control Arms
2005-2011 Mustang Adjustable Street Upper Control Arm
Part# 40-704
2005-2011 Mustang Adjustable Street Upper Control Arm, SW Race Cars new fully adjustable upper control arm for the 2005 and newer Mustang is engineered to allow adjustment of both the pinion angle and instant center. Energy Suspension polyurethane bushings make this kit a smooth quiet improvement that is perfect for high performance street use, A longer than stock upper link allows for smoother operation of the rear suspension through its travel. Â SW Race Cars fully adjustable upper control arm is 100% bolt on and requires no drilling or welding. Kit comes black powder coated and all necessary additional hardware is included. 40-704 instructions
SKU: 40-704 -
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In
2005-2014 Mustang 2″ Narrowed Bolt In 9″ Housing
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In2005-2014 Mustang 2″ Narrowed Bolt In 9″ Housing
Part# 45-448
2005-2014 Mustang Narrowed Bolt In 9″ Housing, center pinion, 63-1/4″ axle flange to axle flange. Housing is 2″ narrower than stock for extra tire clearance or to allow a more standard offset rear wheel. Bolt in replacement for stock 8.8″ rear axle housing. Shock control arm brackets in stock location. Lower control arm bracket feature addition holes for suspension adjustment.Late model big Ford housing end accepts 3.150″ axle bearing Requires aftermarket axles       No provision for factory anti roll bar.  Require late model big Ford brakes – DOES NOT accept stock Mustang Brakes.
SKU: 45-448 -
S&W Made Parts, Connectors, Bolt-In for OEM/Stock Applications
2005-2014 Mustang 3 Point Subframe Connector
S&W Made Parts, Connectors, Bolt-In for OEM/Stock Applications2005-2014 Mustang 3 Point Subframe Connector
Part# 40-700
2005-2014 Mustang, 3 Point Subframe Connector, engineered to reinforce the torque box and mount by tieing the inner and outer subframe to the lower control arm bolt and torque box mount creating one super strong structure.
SKU: 40-700 -
-
S&W Made Parts, Adjustable Panhard Bars
2005-2014 Mustang Adjustable, Chrome Moly, Panhard Bar
Part# 40-710
Engineered to allow Quick Adjustment on cars with altered ride heights, and Features Chrome Moly Rod Ends, 1-1/4″ x 095 chromoly tubing with chromoly FK rod ends, *An upper brace to replace the stock sheet metal brace is also available (P/N 40-706,) but not necessary for installation.
SKU: 40-710 -
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In
2005-2014 Mustang Bolt In 9″ Housing Stock Width
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In2005-2014 Mustang Bolt In 9″ Housing Stock Width
Part# 45-447
2005-2014 Mustang Bolt In 9″ Housing, Axle face to axle face 65-1/4″, center pinion, 9″ Bolt in replacement for stock 8.8″ rear axle housing. Requires late model big Ford brakes. Shock control arm brackets in stock location. Lower control arm bracket feature addition holes for suspension adjustment. Late model big Ford housing end accepts 3.150″ axle bearing ? Requires aftermarket axles. No provision for factory anti roll bar. WILL NOT accept stock mustang brakes.
Use 45-044 kit to mount factory brakes
Note: for 2″ narrower, use part# 45-448
SKU: 45-447 -
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In
2005-2014 Mustang Fabricated 9″ Ford Housing 2″ Narrowed
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In2005-2014 Mustang Fabricated 9″ Ford Housing 2″ Narrowed
Part# 45-447FAB
2″ narrower than stock. Replaces stock 8.8 rear housing, uses late model big Ford ends (45-1137), shock control arm brackets in stock location, lower control arm brackets have additional holes, center pinion, 58-1/4″ housing end to housing end, 63-1/4″ axle flange to axle flange, for upper control arm hardware use 45-445H. Has brace mounts for anti-roll bar kit 40-708K
If using factory brakes, need to purchase 45-044 kit-
SKU: 45-448FAB -
-
S&W Made Parts, Lower Control Arms
2005-2014 Mustang Lower Control Arms, Chrome Moly & Adjustable
Part# 40-709
2005-2014 Mustang Lower Control Arms, Chrome Moly Adjustable, -Fully Adjustable Chrome Moly Lower Control Arms for your 2005-2011 Mustang. Featuring High Strength Chrome Moly Rod Ends., Black Powder-coated. Sold as a pair., *NOTE: NOT approved for Stock Eliminator Class*
SKU: 40-709 -
-
S&W Made Parts, Adjustable Panhard Bars
2005-2014 Mustang Upper Panhard Bar Support
Part# 40-706
This ultra strong Upper Panhard Bar Support  is designed to replace the stock 2005-2014 Mustang sheet metal brace. (Can be used with P/N 40-703 40-710 Panhard Bars for added strength and durability), Black Powder-coated finish.
SKU: 40-706 -
S&W Made Parts, Upper Control Arms
2011 – 2014 Mustang Adjustable Street Upper Control Arm
Part# 40-717
2011 – 2014 Mustang Adjustable Street Upper Control Arm, SW Race Cars new fully adjustable upper control arm for the 2011 Mustang is engineered to allow adjustment of both the pinion angle and instant center. Energy Suspension polyurethane bushings make this kit a smooth quiet improvement that is perfect for high performance street use, A longer than stock upper link allows for smoother operation of the rear suspension through its travel. SW Race Cars fully adjustable upper control arm is 100% bolt on and requires no drilling or welding. Kit comes black powder coated and all necessary additional hardware is included. 40-717 instructions
SKU: 40-717 -
S&W Made Parts, Upper Control Arms
2012- 2015 Mustang Adjustable Competition Upper Control Arm
Part# 40-716
2012- 2015 Mustang Adjustable Competition Upper Control Arm, Designed to allow adjustments to both pinion angle and instant center! Longer than stock upper link allows smoother operation though out the rear suspension travel. A street version is also available see part # 40-717.
SKU: 40-716 -
S&W Made Parts, Lower Control Arms, Upper Control Arms
79-04 Mustang Control Arm Stiffening Kit
Part# 40-729
Perfect for the Mustang racer on a budget or for classes where replacing your control arms is not permitted. The SW stiffening kit simply welds to your factory control arm converting them into strong, fully boxed suspension members. Sold in a set which does 2 uppers and 2 lowers.
SKU: 40-729 -
S&W Made Parts, Lower Control Arms
79-04 Mustang Lower Control Arms With Sway Bar Mounting Brackets
Part# 40-722
79-04 Mustang lower control arms with sway bar mounting brackets (mount brackets not shown) 1-3/4″ diameter x .134 wall with spring pads and brackets for stock anti-roll bar, 17-5/8″ center to center non adjustable. Includes poly bushings, grade 8 hardware, black powder coating 40-722 instructions
SKU: 40-722 -
S&W Made Parts, Lower Control Arms
79-04 Mustang Tubular Lower Control Arms
Part# 40-721
Perfect for ET Bracket racing or Stock Eliminator! Custom fabricated from super strong 1-5/8 x .134″ wall tubing. High Quality Energy Suspension bushings retain ride quality and eliminare bushing movement. Direct replacement for factory control arm and installs with factory hardware – DOES NOT accept factory sway bars!”
SKU: 40-721 -
S&W Made Parts, Lower Control Arms
79-04 Mustang Weight Jacker Lower Control Arm
Part# 40-725
SW Race Cars new 79-04 Mustang weight jacker control arms are perfect for ET bracket and Stock Eliminator racing as well as high performance street use. Â Each set is custom fabricated and fully adjustable to allow the racer the ultimate in “tunability”. S&W’s unique spanner adjuster makes weight jacking quick easy. Â Each set of control arms includes its own tool set. These arms are a direct replacement for the factory control arm and include all necessary mounting hardware Powder coated for a long lasting, durable and attractive finish. Â Â – Does Not Accept Factory Sway Bars!
SKU: 40-725 -
S&W Made Parts, Connectors, Bolt-In for OEM/Stock Applications
79-93 Mustang Bolt On Sub Frame Connectors
S&W Made Parts, Connectors, Bolt-In for OEM/Stock Applications79-93 Mustang Bolt On Sub Frame Connectors
Part# 40-720
SW has made the only 100% bolt on connector that bolts to the engine k-member, seat mounts, and rear lower control arm bolt and torque box! Powder coated for a long lasting, attractive finish. All necessary hardware included.
SKU: 40-720 -
K-Members, Front Suspension & Rear Suspension Packages
90-93 Mustang K-Member & Front Suspension Package
K-Members, Front Suspension & Rear Suspension Packages90-93 Mustang K-Member & Front Suspension Package
Part# 50-MU2HB
1990-1993 Mustang, 225#  Springs, Bushing Mounted Control Arms.The QA1 Mustang Pro-Active System is the most advanced and complete bolt-on frong suspension ever engineered for Mustang 5.0/4.6 racing applications (not suitable for street use due to lightweight components). The Pro-Active System has it all – quality, performance and adjustability. Whether you are a weekend racer or Pro 5.0 driver, the QA1 Mustang Pro-Active System does it all.,  , The QA1 Mustang Pro-Active System includes:, Tubular K-member Coil-Over Conversion Kit Bushing Mounted Tubular Control Arms Caster/Chamber Plates Mustang Struts with 225# Springs
SKU: 50-MU2HB
