Rear Housings & Components Categories
Rear Housings & Components
Showing 1–24 of 193 results
-
Rear Axle Housings, S&W Made Parts, Stock Replacement/Bolt In
2005-2014 Mustang 2″ Narrowed Bolt In 9″ Housing
Rear Axle Housings, S&W Made Parts, Stock Replacement/Bolt In2005-2014 Mustang 2″ Narrowed Bolt In 9″ Housing
Part# 45-448
2005-2014 Mustang Narrowed Bolt In 9″ Housing, center pinion, 63-1/4″ axle flange to axle flange. Housing is 2″ narrower than stock for extra tire clearance or to allow a more standard offset rear wheel. Bolt in replacement for stock 8.8″ rear axle housing. Shock control arm brackets in stock location. Lower control arm bracket feature addition holes for suspension adjustment.Late model big Ford housing end accepts 3.150″ axle bearing Requires aftermarket axles       No provision for factory anti roll bar.  Require late model big Ford brakes – DOES NOT accept stock Mustang Brakes.
SKU: 45-448 -
Rear Axle Housings, S&W Made Parts, Stock Replacement/Bolt In
2005-2014 Mustang Bolt In 9″ Housing Stock Width
Rear Axle Housings, S&W Made Parts, Stock Replacement/Bolt In2005-2014 Mustang Bolt In 9″ Housing Stock Width
Part# 45-447
2005-2014 Mustang Bolt In 9″ Housing, Axle face to axle face 65-1/4″, center pinion, 9″ Bolt in replacement for stock 8.8″ rear axle housing. Requires late model big Ford brakes. Shock control arm brackets in stock location. Lower control arm bracket feature addition holes for suspension adjustment. Late model big Ford housing end accepts 3.150″ axle bearing ? Requires aftermarket axles. No provision for factory anti roll bar. WILL NOT accept stock mustang brakes.
Use 45-044 kit to mount factory brakes
Note: for 2″ narrower, use part# 45-448
SKU: 45-447 -
Rear Axle Housings, S&W Made Parts, Stock Replacement/Bolt In
2005-2014 Mustang Fabricated 9″ Ford Housing 2″ Narrowed
Rear Axle Housings, S&W Made Parts, Stock Replacement/Bolt In2005-2014 Mustang Fabricated 9″ Ford Housing 2″ Narrowed
Part# 45-447FAB
2″ narrower than stock. Replaces stock 8.8 rear housing, uses late model big Ford ends (45-1137), shock control arm brackets in stock location, lower control arm brackets have additional holes, center pinion, 58-1/4″ housing end to housing end, 63-1/4″ axle flange to axle flange, for upper control arm hardware use 45-445H. Has brace mounts for anti-roll bar kit 40-708K
If using factory brakes, need to purchase 45-044 kit-
SKU: 45-448FAB -
Stock Replacement/Bolt In
2005-Newer Mustang Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-623
JOHNS INDUSTRIES 2005-NEWER MUSTANG COMPLETE 9″FORD BIG BEARING BOLT IN REAR: COMES WITH ALL NEW U.S. MADE HOUSINING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-623 -
Brackets & Tabs & Bottle Clamps, Hardware & Tools, Housing Tools, S&W Made Parts, Tools
4-Link & Ladder Bar Bracket Spacer Jig Kit 5/8″ Hole
Brackets & Tabs & Bottle Clamps, Hardware & Tools, Housing Tools, S&W Made Parts, Tools4-Link & Ladder Bar Bracket Spacer Jig Kit 5/8″ Hole
Part #95-022
Used to align space  4-Link ladder bar chassis brackets can also be used for 4-Link rear housing brackets includes (2)zinc plated spacers , Bolts nuts spacer has 5/8″ hole and is 1.20 thick spacer has “GRAB TAB”welded on for easy install removal
SKU: 90-022 -
Brackets & Tabs & Bottle Clamps, Hardware & Tools, Housing Tools, S&W Made Parts, Tools
4-Link Bracket Spacer Kit – 1/2″ Hole
Brackets & Tabs & Bottle Clamps, Hardware & Tools, Housing Tools, S&W Made Parts, Tools4-Link Bracket Spacer Kit – 1/2″ Hole
Part # 90-027
Spacer has 1/2″ hole and is 1.20″ wide used to align space 4-Link chassis brackets can also be used for 4-Link rear hsg. brackets includes (2)zinc plated spacers,bolt nuts spacer has “GRAB TAB” welded on for easy install removal.
SKU: 90-027 -
Hardware & Tools, Housing Tools, S&W Made Parts, Tools
4-Link Tube Length Checking Tool
Part# 95-027
Whether you’re building a new car, updating your present car to a 4-link or just replacing your 4-link rod ends, this quick and easy to use tool insures you that your tubes will equal in length. Inexpensive and easy to use, this handy tool is a must for every serious racer’s tool box.
SKU: 95-027 -
Stock Replacement/Bolt In
55-57 Chevy Complete 9″ Ford Big Bearing Bolt In Rear
Part#45-615
55-57 CHEVY COMPLETE 9″FORD BIG BEARING BOLT IN REAR: COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-615 -
Stock Replacement/Bolt In
58-64 Full Size Chevy Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-622
JOHNS INDUSTRIES COMPLETE 9″FORD BIG BEARING BOLT IN REAR 58-64 FULL SIZE CHEVY, COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS, AND TABS, TRU TRAC THIRD MEMBER, DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, AND HOUSING VENT.W/ FORD 10″ DRUM BRAKES, FITS 58-64 FULL SIZE CHEVY
SKU: 45-622 -
Stock Replacement/Bolt In
64-77 Chevelle & Monte Carlo Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-618
JOHN INDUSTRIES 64-77 CHEVELLE, MONTE CARLO COMPLETE 9″FORD BIG BEARING BOLT IN REAR: COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-618 -
Bolt-in Rear Housings, Stock Replacement/Bolt In
67-69 & 70-81 Camaro ,62-67 & 68-76 Nova Complete 9″ Ford Big Bearing Bolt In Rear
Bolt-in Rear Housings, Stock Replacement/Bolt In67-69 & 70-81 Camaro ,62-67 & 68-76 Nova Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-620
Johns Industries 67-69 70-81 CAMARO,62-67 68-76 NOVA, COMPLETE 9″FORD BIG BEARING BOLT IN REAR, COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU-TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-620 -
Stock Replacement/Bolt In
78-87 G Body Malibu, Grand National Complete 9″ Ford Big Bearing Bolt In Rear
Stock Replacement/Bolt In78-87 G Body Malibu, Grand National Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-619
JOHNS INDUSTRIES 78-87 G BODY MALIBU, GRAND NATIONAL COMPLETE 9″FORD BIG BEARING BOLT IN REAR: COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-619 -
Stock Replacement/Bolt In
79-2004 Mustang, Capri, T-Bird Complete 9″ Ford Big Bearing Bolt In Rear
Part# 45-621
JOHNS INDUSTRIES 79-2004 MUSTANG, CAPRI, T-BIRD COMPLETE 9″FORD BIG BEARING BOLT IN REAR, COMES WITH ALL NEW U.S. MADE HOUSING, NEW 31 SPLINE HIGH PERFORMANCE AXLES, SPRING PERCHES, BRACKETS AND TABS, TRU TRAC THIRD MEMBER WITH DESIRED RATIO, SUPER LIGHT IRON NODULAR CASE, NEW PINION YOKE, BEARINGS, STUDS, ALL FASTENERS, AXLE SEALS, HOUSING VENT.AND FORD 10″ DRUM BRAKES
SKU: 45-621 -
Bolt-in Rear Housings, S&W Made Parts, Stock Replacement/Bolt In
82-03 Camaro Rear Suspension Bracket Kit
Bolt-in Rear Housings, S&W Made Parts, Stock Replacement/Bolt In82-03 Camaro Rear Suspension Bracket Kit
Part# 40-449
Includes lower control arm and shock mount brackets and panhard brackets. Plus adjustable spring pads with adjustment wrench. Made from 3/16″ mild steel to fit 3″ axle tube
SKU: 40-449 -
S&W Made Parts, To fit S&W Frame Kit
9″ Ford Housing For S&W 10-507 4-Link Frame Kit With Back Brace
Part# 45-1472
Use with S&W 10-507 4-link frame kit with 14″ x 15″ wheel and 4″ back-space. New style big Ford housing ends. 1″ pinion off-set, 32-1/4″ housing end to housing end, 37-1/4″ axle face to axle face. Fill and drain plugs welded onSKU: 45-1472 -
S&W Made Parts, To fit S&W Frame Kit
9″ Ford Housing For S&W 22″ 4-Link Frame 10-431-22;
Part# 45-1522
Used with 10-431-22  P5 frame, 1/2″ 4-link mounting holes 1″ Pinion off-set, late model big for ends, back brace, fill cap and drain uses 4-link brackets with integral wheelie bar and torsion bar mounts adjustable lower shock mounts 32-1/4″ housing end to housing end, 37-1/4″ axle face to axle face (designed for 4″ back-space wheel)
SKU: 45-1522 -
S&W Made Parts, To fit S&W Frame Kit
9″ Ford Housing For S&W 24″ 4-Link Frame 10-431-24
Part# 45-1524
Used with 10-431-24  P5 frame, 1/2″ 4-link mounting holes Center pinion, late model big for ends, back brace, fill cap and drain uses 4-link brackets with integral wheelie bar and torsion bar mounts adjustable lower shock mounts 34-1/4″ housing end to housing end, 39-1/4″ axle face to axle face (designed for 4″ back-space wheel)
SKU: 45-1524
