Quik Latch Products
Quik Latch Products
Showing 1–24 of 35 results
-
-
Other Parts, Quik Latch Products, S&W Made Parts
Body Mount Kit – S&W Funny Car
Part# 95-305
chromoly tubing used: 7/8″X065, 3/4″ x 065, 5/8″ x 058, 1/2″ x 058, 3/8″ x 095, 3/8″ x 058. Needs to ship in crate: 80″ long x 30″ wide x 8″ high (crate charge extra) Does not include kits 95-903 roof latch or 95-304 body latch kit 95-305 instructions
SKU: 95-305 -
-
Other Parts, Quik Latch Products, S&W Made Parts
Funny Car Puke Tank & Mounting Kit – 2.3 Gallon
Part# FC-119
10″ diameter x 12″ tall aluminum tank, 2.3 gallons below the baffels (2) 1-1/4″ diameter inlet tubes, #8 drain. includes tabs, tubes & hardware. Tank is sealed, Mounts to rear body mount frame
SKU: FC-119 -
Other Parts, Quik Latch Products, S&W Made Parts
Funny Car Rear Body Mounting Frame
Part# FC-117
Welds to back of funny car chassis Includes 7/8″ & 3/4″ diameter chromoly tubing, threaded tube ends and hardware. Note: body hinges not included. For aluminum hinge use (2) FC-012, for locking cable release use (1) FC-108 FC-117 instructions
SKU: FC-117 -
Quik Latch Products
Old School Polished Hood Pins 6061 Billet (Pair)
Now you can have the best of both worlds… the modern push button release action of Quik-Latch Hood Pins, along with the retro styling of traditional ‘Old School’ hood pins. Just pull the hitch pin and push the button to release the latch.Each QL-50-OSP Hood Pin Kit Includes: 2 Latch assemblies, 2 retaining rings, 2 mounting studs, 4 nuts, 4 washers, 6 set screws and 2 hitch pins
SKU: 95-363 -
Quik Latch Products
Quik Latch Mini Mounting Bucket
Part# 95-320
QUIK LATCH MINI MOUNTING BUCKET PART # QL-25-B (sold each) Quik-Latch mounting brackets have been produced to help flush-mount two components together easily. They are designed to be used in conjunction with the Quik-Latch minis.
SKU: 95-320 -
-
-
Quik Latch Products
Quik-Latch Air Cleaner Button Kit Billet
Part# 95-357
Air Cleaner Minis -For decades, the preferred method of securing the air cleaner housing to a carburetor has been through the use of a wingnut. Removing and reinstalling the air cleaner housing can be a time consuming process by spinning the wingnut on and off the air cleaner stud. Why not replace this antiquated design with a specially designed mini latch? These pieces are a perfect finishing touch to custom build vehicle., Dimensions: With a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4″ x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch mini Air Cleaner kit comes with one stud, one nut, and one latch assembly., Finish:Billet
SKU: 95-357 -
Quik Latch Products
Quik-Latch Air Cleaner Button Kit Black
Part# 95-358
Air Cleaner Minis -For decades, the preferred method of securing the air cleaner housing to a carburetor has been through the use of a wingnut. Removing and reinstalling the air cleaner housing can be a time consuming process by spinning the wingnut on and off the air cleaner stud. Why not replace this antiquated design with a specially designed mini latch? These pieces are a perfect finishing touch to custom build vehicle., Dimensions: With a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4″ x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch mini Air Cleaner kit comes with one stud, one nut, and one latch assembly., Finish:Black
SKU: 95-358 -
Quik Latch Products
Quik-Latch Air Cleaner Button Kit Polished
Part# 95-359
Air Cleaner Minis -For decades, the preferred method of securing the air cleaner housing to a carburetor has been through the use of a wingnut. Removing and reinstalling the air cleaner housing can be a time consuming process by spinning the wingnut on and off the air cleaner stud. Why not replace this antiquated design with a specially designed mini latch? These pieces are a perfect finishing touch to custom build o vehicle., Dimensions: With a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4″ x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch mini Air Cleaner kit comes with one stud, one nut, and one latch assembly., Finish:Polished
SKU: 95-359 -
Quik Latch Products
Quik-Latch GT Style Twist Button Black
Part# 95-353
Latch “Twist Lock” hood pin sets come equipped with installation instructions, two latch mechanisms, two retaining rings, four 7/16” stainless steel nuts, four 7/16” stainless steel washers, four 10x32x1” set screws and two hood pins., Twist Lock Dimensions:3.00 Inches Upper Latch Mechanism Diameter2.20 Inches Lock Ring Diameter1.90 Inches Latch Mechanism Height2.88 Inches Mounting Stud Length, Finish: Black
SKU: 95-353 -
Quik Latch Products
Quik-Latch GT Style Twist Button Polished
Part# 95-352
Latch “Twist Lock” hood pin sets come equipped with installation instructions, two latch mechanisms, two retaining rings, four 7/16” stainless steel nuts, four 7/16” stainless steel washers, four 10x32x1” set screws and two hood pins., Twist Lock Dimensions:3.00 Inches Upper Latch Mechanism Diameter2.20 Inches Lock Ring Diameter1.90 Inches Latch Mechanism Height2.88 Inches Mounting Stud Length, Finish: Polished
SKU: 95-352 -
Quik Latch Products
Quik-Latch Low Profile Button 2.5 Dia (Clear Anodized)
Part# 95-317
LATCH LOW PROFILE BUTTON 2.5 DIA (CLEAR ANODIZED) PART # QL-50-LP , Quik-Latch Low Profile Hood Pin sets come equipped with installation instructions, two latch mechanisms, two retaining rings, four 7/16” stainless steel nuts, four 7/16” stainless steel washers, four 10x32x1” set screws and two hood pins.Low Profile Dimensions:2.50 Inches Upper Latch Mechanism Diameter2.20 Inches Lock Ring Diameter1.15 Inches Latch Mechanism Height2.88 Inches Mounting Stud Length
SKU: 95-317