Chrysler 10-Point Roll Cages
Chrysler Mopar Categories
Chrysler Mopar
Showing 1–24 of 144 results
-
S&W Made Parts, Through the Dash
1955-1983 Jeep CJ5 10 Point Roll Cage CM
Part#11-2521-CM
1955-1983 Jeep CJ5, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2521-CM -
S&W Made Parts, Through the Dash
1955-1983 Jeep CJ5 10 Point Roll Cage DOM
Part#11-2521-DOM
1955-1983 Jeep CJ5, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2521-DOM -
S&W Made Parts, Through the Dash
1955-1983 Jeep CJ5 10 Point Roll Cage EWS
Part#11-2521
1955-1983 Jeep CJ5, 10-Point Roll Cage, NHRA & IHRA APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2521 -
S&W Made Parts, Through the Dash
1962-1964 Dodge Polara & Dodge 330 (C-Body) 10 Point Roll Cage CM
Part# 11-2535-CM
1962-1964 Dodge Polara & Dodge 330, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
Roll Bar & Roll Cage Instructions
SKU: 11-2535-CM -
S&W Made Parts, Through the Dash
1962-1964 Dodge Polara & Dodge 330 (C-Body) 10 Point Roll Cage DOM
Part# 11-2535-DOM
1962-1964 Dodge Polara & Dodge 330, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
Roll Bar & Roll Cage Instructions
SKU: 11-2535-DOM -
S&W Made Parts, Through the Dash
1962-1964 Dodge Polara & Dodge 330 (C-Body) 10 Point Roll Cage EWS
Part# 11-2535
1962-1964 Dodge Polara & Dodge 330, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
Roll Bar & Roll Cage Instructions
SKU: 11-2535 -
S&W Made Parts, Through the Dash
1963-1965 Plymouth Belvedere (B-Body) 10 Point Roll Cage CM
Part# 11-2543-CM
1963-1965 Plymouth Belvedere (B-Body), 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2543-CM -
S&W Made Parts, Through the Dash
1963-1965 Plymouth Belvedere (B-Body) 10 Point Roll Cage DOM
Part# 11-2543-DOM
1963-1965 Plymouth Belvedere (B-Body), 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2543-DOM -
S&W Made Parts, Through the Dash
1963-1965 Plymouth Belvedere (B-Body) 10 Point Roll Cage EWS
Part# 11-2543
1963-1965 Plymouth Belvedere (B-Body), 10-Point Roll Cage, NHRA & IHRA APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2543 -
S&W Made Parts, Through the Dash
1964-1966 Plymouth Barracuda & Plymouth Valiant 8 Point Roll Bar CM
Part# 11-2530-CM
1964-1966 Plymouth Barracuda & Plymouth Valiant, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2530-CM -
S&W Made Parts, Through the Dash
1964-1966 Plymouth Barracuda & Plymouth Valiant 8 Point Roll Bar DOM
S&W Made Parts, Through the Dash1964-1966 Plymouth Barracuda & Plymouth Valiant 8 Point Roll Bar DOM
Part# 11-2530-DOM
1964-1966 Plymouth Barracuda & Plymouth Valiant, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2530-DOM -
S&W Made Parts, Through the Dash
1964-1966 Plymouth Barracuda & Plymouth Valiant 8 Point Roll Bar EWS
S&W Made Parts, Through the Dash1964-1966 Plymouth Barracuda & Plymouth Valiant 8 Point Roll Bar EWS
Part# 11-2530
1964-1966 Plymouth Barracuda & Plymouth Valiant, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2530 -
S&W Made Parts, Through the Dash
1965-1966 Dodge Dart 10 Point Roll Cage CM
Part# 11-2533-CM
1965-1966 Dodge Dart, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2533-CM -
S&W Made Parts, Through the Dash
1965-1966 Dodge Dart 10 Point Roll Cage DOM
Part# 11-2533-DOM
1965-1966 Dodge Dart, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2533-DOM -
S&W Made Parts, Through the Dash
1965-1966 Dodge Dart 10 Point Roll Cage EWS
Part# 11-2533
1965-1966 Dodge Dart, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2533 -
S&W Made Parts, Through the Dash
1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite 10 Point Roll Cage CM
S&W Made Parts, Through the Dash1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite 10 Point Roll Cage CM
Part# 11-2536-CM
1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2536-CM -
S&W Made Parts, Through the Dash
1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite 10 Point Roll Cage DOM
S&W Made Parts, Through the Dash1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite 10 Point Roll Cage DOM
Part# 11-2536-DOM
1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2536-DOM -
S&W Made Parts, Through the Dash
1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite 10 Point Roll Cage EWS
S&W Made Parts, Through the Dash1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite 10 Point Roll Cage EWS
Part# 11-2536
1966-1967 Dodge Coronet, Dodge Charger & Plymouth Satellite, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2536 -
S&W Made Parts, Through the Dash
1966–1973 Jeepster Commando 10 Point Roll Cage CM
Part# 11-2588-CM
1966–1973 Jeepster Commando, 10-Point Roll Cage, NHRA & IHRA APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates and 2″ x 3″ outriggers. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2588-CM -
S&W Made Parts, Through the Dash
1966–1973 Jeepster Commando 10 Point Roll Cage DOM
Part# 11-2588-DOM
1966–1973 Jeepster Commando, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates and 2″ x 3″ outriggers. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2588-DOM -
S&W Made Parts, Through the Dash
1966–1973 Jeepster Commando 10 Point Roll Cage EWS
Part# 11-2588
1966–1973 Jeepster Commando, 10-Point Roll Cage, NHRA & IHRA APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates and 2″ x 3″ outriggers. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2588 -
S&W Made Parts, Through the Dash
1967-1969 Plymouth Barracuda 10 Point Roll Cage CM
Part# 11-2531-CM
1967-1969 Plymouth Barracuda, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8″ x .083 Chrome Moly wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2531-CM -
S&W Made Parts, Through the Dash
1967-1969 Plymouth Barracuda 10 Point Roll Cage DOM
Part# 11-2531-DOM
1967-1969 Plymouth Barracuda, 10-Point Roll Cage, 1-3/4″ x .120 wall DOM mild steel tubing. Includes 6″ x 6″ 1/8″ plates. Most tubes are notched. Windshield bars have one bend. Roof hoop, windshield bars and dash bar are not notched. Do not recommend .120″ wall DOM tubing for drag racing applications since .120″ wall is too close to .118″ wall mild steel minimum spec. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2531-DOM -
S&W Made Parts, Through the Dash
1967-1969 Plymouth Barracuda 10 Point Roll Cage EWS
Part# 11-2531
1967-1969 Plymouth Barracuda, 10-Point Roll Cage, NHRA & IHRAÂ APPROVED 8.50 seconds 1/4 mile e.t. and slower. 1-5/8 x .134″ EWS mild steel wall tubing. Includes 6″ x 6″ 1/8″ plates. Windshield bars have one bend. Most tubes are notched. Roof hoop, windshield bars and dash bar are not notched. Photo is for clarification purpose only, actual part may vary.
SKU: 11-2531