Requires use of SW Torque arm kit 40-619 connectors 40-610 (93-03) . For cars with another manufacturer connector use crossmember #40-611. For Cars already equipped with SW torque arm use mounting kit # 40-618.
S&W Made Parts, Stock Replacement/Bolt In, Bolt-in Rear Housings
Bolt In 9″ Ford Housing for 93-02 Camaro, 2″ Narrower
Part# 45-449N Bolt in 9″ Ford housing for 93-02 Camaro Firebird. Housing is stock width. 57-1/4″ housing flange to housing flange, 62-3/4″ axle flange to axle flange. Requires aftermarket brakes axles. Uses GM Housing end for 3.150 bearings. All mounting brackets are in stock location. Lower control arm brackets shock mounts have multiple adjustment holes. Features weight jacket spring mounts, an SW exclusive!
$818.25
| Weight | 75 lbs |
|---|---|
| Dimensions | 70 × 12 × 12 in |
Upgrades
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
S&W Made Parts, Stock Replacement/Bolt In, Bolt-in Rear Housings
Bolt In 9″ Ford Housing for 82-92 Camaro Stock Width
S&W Made Parts, Stock Replacement/Bolt In, Bolt-in Rear HousingsBolt In 9″ Ford Housing for 82-92 Camaro Stock Width
Part# 45-450
Same width as stock, 56-1/4″ housing end to housing end, 61-3/4″ axle face to axle face, (1/2″ pinion off-set), uses GM housing ends with 3.15 bearing. Uses after market brakes. Brackets are in stock locations, lower control arm brackets have additional mounting holes. Adjustable weight jacker spring pad. Works with 40-619 or 40-619CM torque arm and 40-600 or 40-600CM frame connectors
SKU: 45-450 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In
2005-2014 Mustang 2″ Narrowed Bolt In 9″ Housing
S&W Made Parts, Rear Axle Housings, Stock Replacement/Bolt In2005-2014 Mustang 2″ Narrowed Bolt In 9″ Housing
Part# 45-448
2005-2014 Mustang Narrowed Bolt In 9″ Housing, center pinion, 63-1/4″ axle flange to axle flange. Housing is 2″ narrower than stock for extra tire clearance or to allow a more standard offset rear wheel. Bolt in replacement for stock 8.8″ rear axle housing. Shock control arm brackets in stock location. Lower control arm bracket feature addition holes for suspension adjustment.Late model big Ford housing end accepts 3.150″ axle bearing Requires aftermarket axles No provision for factory anti roll bar. Require late model big Ford brakes – DOES NOT accept stock Mustang Brakes.
SKU: 45-448 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET