| Weight | 9.26 lbs |
|---|---|
| Dimensions | 20 × 8 × 8 in |
Upper Control Arms, S&W Made Parts
2005-2011 Mustang Adjustable Street Upper Control Arm
Part# 40-704
2005-2011 Mustang Adjustable Street Upper Control Arm, SW Race Cars new fully adjustable upper control arm for the 2005 and newer Mustang is engineered to allow adjustment of both the pinion angle and instant center. Energy Suspension polyurethane bushings make this kit a smooth quiet improvement that is perfect for high performance street use, A longer than stock upper link allows for smoother operation of the rear suspension through its travel. SW Race Cars fully adjustable upper control arm is 100% bolt on and requires no drilling or welding. Kit comes black powder coated and all necessary additional hardware is included. 40-704 instructions
$327.45
Upgrades
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
You may also like…
Related products
-
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET -
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003W-F-AET -
-
S&W Made Parts, Chassis & Blueprints, Blueprints
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP
