| Weight | 5 lbs |
|---|---|
| Dimensions | 9 × 9 × 9 in |
S&W Made Parts, Upper Control Arms
2005-2011 Mustang Adjustable Drag Race Upper Control Arm
Part# 40-701
2005-2011 Mustang Adjustable Drag Race Upper Control Arm, Designed to allow adjustments to both pinion angle and instant center! Longer than stock upper link allows smoother operation throughout the rear suspension travel. A street version is also available see part # 40-704.
$327.45
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
 Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET -
S&W Made Parts, Upper Control Arms
1979-2004 Mustang Upper Control Arms
Part# 40-724
SW Race Cars new 79-04 Mustang upper control arms are perfect for ET bracket and Stock Eliminator racing.  Each set is custom fabricated and fully adjustable to allow the racer the ultimate in “tunability”. These arms are a direct replacement for the factory control arm and include all necessary mounting hardware  Powder coated for a long lasting, durable and attractive finish.
SKU: 40-724 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003W-F-AET -
S&W Made Parts, Lower Control Arms, Upper Control Arms
79-04 Mustang Control Arm Stiffening Kit
Part# 40-729
Perfect for the Mustang racer on a budget or for classes where replacing your control arms is not permitted. The SW stiffening kit simply welds to your factory control arm converting them into strong, fully boxed suspension members. Sold in a set which does 2 uppers and 2 lowers.
SKU: 40-729
