| Weight | 211 lbs |
|---|
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 21″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
$3,047.45
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
For your rear engine dragster kits, few questions: 1. They come complete/welded? 2. What is weight of 225\" chassis? 3. Are 150\" rear engine kit available?
We do weld chassis here if you want us to. The base kit comes with all tubing to make the chassis, the rear housing, mounting plates for rear housing, front and mid motor plates and king pin bosses. The weight is about 211 lbs, You could get it as short as 170"
Question by : Christopher on Apr 7, 2020 01:51:55 PM
Related products
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Part# 05-002-AET-BP
Assembly blueprint with cut list for 230″ wheelbase ADVANCED ET dragster with swing arm rear suspension. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-002-AET-BP -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP -
Chassis Kits, Dragster, Altered, & Funny Car, S&W Made Parts
150″ Advance E.T. Altered With Swing Arm Rear Suspension
Chassis Kits, Dragster, Altered, & Funny Car, S&W Made Parts150″ Advance E.T. Altered With Swing Arm Rear Suspension
Part# 06-150
Meets SFI spec 10-2 for altereds 6.00 to 749 E.T. All chrome-moly cut bent. Jig welded front axle. Strange aluminum rear housing with chrome moly brackets . Rear housing mounts. Water jet cut Chevy mid plate. Water jet cut Chevy front motor plate blanks. Motor plate mounting brackets . Jig welded swing arm upper tubes with 8 chrome moly rod ends. Anti roll bar, housing links. Adjustable. upper shock mounts. Altered blue print., For use with SW Bantam body part # 95-669
SKU: 06-150 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 245″ Dragster Kit – For Solid Mount Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 245″ Dragster Kit – For Solid Mount Rear, No Rear Included
Part# 05-003-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49, 21″ SHOULDER HOOP, REAR HOUSING NOT INCLUDED !!!. KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MTR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS, BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED
SKU: 05-003-AET