NOTE: Shipping charges, for this Oversize Truck Freight item, will be calculated by an S&W Performance Group representative and will be charged separately. You will also receive an email, direct from S&W, which includes the Oversize Truck Freight total.
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 245″ Dragster Kit – For Solid Mount Rear, No Rear Included
Part# 05-003-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49, 21″ SHOULDER HOOP, REAR HOUSING NOT INCLUDED !!!. KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MTR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS, BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED
NOTE: This is an Oversize Truck Freight Item
$3,352.19
| Weight | .5 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
what are your lead times on this chaiis kit?
Lead times on chassis kits are usually 2-1/2 to 3 weeks
Question by : chris Sweeney on Jan 9, 2020 01:10:03 PM -
Hey guys, getting into the final stages of upgrade and I need some bushings for this torsion bar on the rear end. I need bushings for an 1 1/4\" x .058 tube x .875 ID
You will need to call and talk to our engineer, John (800)523-3353 extension 137. We should be able to make a set
Question by : Gary Zella on Jan 10, 2021 01:45:18 PM
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
200″ Front Engine Nostalgia Dragster Chassis Kit;
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts200″ Front Engine Nostalgia Dragster Chassis Kit;
Part# 05-004
200″ wheelbase, front engine dragster chassis kit. Perfect for nostalgia dragster racing. Meets SFI spec 2.4C 6.00 – 7.49. Kit includes all chrome moly tubing, cut, bent and notched (where possible). Jig welded front axle, 1/4″ Aluminum mid motor plate blank. Aluminum front motor plate blanks. 9″ Ford rear with Olds ends. Rear housing mounts. Anti-rotation device. Blue print. NOTE – this is a chrome moly kit and must be TIG welded.
NOTE: This is an Oversize Truck Freight Item
SKU: 05-004 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print.
NOTE: This is an Oversize Truck Freight Item
SKU: 05-002W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Part# 05-003W-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49 REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 23″ SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001W-AET