Each Pro/Series Chassis Kit comes complete with detailed assembly blueprints to guide you during assembly. When you purchase an SW Pro/Series Chassis Kit you also get benefits of the full technical support available only through a racing company! When the work week is done, we go racing and if you call with a question or a problem, we understand, because we’ve been there.  Put the experience of a 2 time Car Craft Magazine All-Star Drag Racing Team’s Sportsman Chassis Builder to work for you with a Pro/Series Chassis Kit from SW Race Cars.
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
$5,907.35
Weight | 250 lbs |
---|
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003W-F-AET$4,339.55 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 21″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001-AET$3,047.45 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 21″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 21″ Wide
Part# 05-003-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES’s FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003-F-AET$4,339.55 -
Dragster, Altered, & Funny Car, S&W Made Parts
245″ Top Dragster Chassis Kit Adv ET Swing Arm
Part# 05-090W-AET
245″ wheelbase rear engine swing arm chassis kit with 23″ shoulder hoop. Cockpit meets SFI spec 2.5, 6.00-7.49 seconds. Kit is made out of chromoly tubing. The tubing is cut to length and notched. Roll cage requires fitting. Includes; Strange aluminum housing with welded swing arm brackets, swing arm, top links, torsion bar, shock mounts, mid plate & front motor mounts, king pin bosses, and hardware.
SKU: 05-090W-AET$6,035.55