Each Pro/Series Chassis Kit comes complete with detailed assembly blueprints to guide you during assembly. When you purchase an SW Pro/Series Chassis Kit you also get benefits of the full technical support available only through a racing company! When the work week is done, we go racing and if you call with a question or a problem, we understand, because we’ve been there. Put the experience of a 2 time Car Craft Magazine All-Star Drag Racing Team’s Sportsman Chassis Builder to work for you with a Pro/Series Chassis Kit from SW Race Cars.
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
$5,907.35
| Weight | 250 lbs |
|---|
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
S&W Made Parts, Chassis & Blueprints, Blueprints
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
S&W Made Parts, Chassis & Blueprints, BlueprintsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
-
S&W Made Parts, Chassis & Blueprints, Blueprints
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP -
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET
