| Weight | 250 lbs |
|---|
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
$4,339.55
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-S-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear.  Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Part# 05-002-AET-BP
Assembly blueprint with cut list for 230″ wheelbase ADVANCED ET dragster with swing arm rear suspension. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-002-AET-BP