| Weight | 250 lbs |
|---|
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Part# 05-003W-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49 REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 23″ SHOULDER HOOP
$3,047.45
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
Can you sell me a kit that meets SFI 2.1. Wanting to build a ALCOHOL dragster. Let me know ! Thank you. If you don\'t sell one can you help me find a Co that does.
-
When do you need blow back bars added to motor plate. Should they support the top or bottom. Dave
yes you should use blow back bars otherwise you will usually bend or crack your motor plates and or mounting tabs. Position them so you have clearance to work on things.
Question by : Dave on Jan 10, 2021 02:09:39 PM
Related products
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET -
Chassis Kits, Dragster, Altered, & Funny Car, S&W Made Parts
125″ 4-Link Altered Chassis Kit
Part# 06-001
ALL CHROME MOLY TUBING PRE-CUT AND BENT
MOTOR PLATE BLANK, MOTOR MOUNTS,
4-LINK FRAME BRACKETS
FAB HOUSING INCLUDED, FILL & DRAIN, OLDS ENDS
NO SUSPENSION BRACKETS WELDED ON
CHROME MOLY 4-LINK TUBES & ROD ENDS
INCLUDES INTERIOR REINFORCING TUBES FOR ADVANCED ETSKU: 06-001 -
Chassis Kits, Dragster, Altered, & Funny Car, S&W Made Parts
67-68 Camaro Roadster Chassis Kit
Part# 07-005
67-68 Camaro roadster chassis kit, 112″ WB, Designed FOR CYNERGY 67 CAMARO ROADSTER BODY, All CHROME MOLY TUBING CUT, BENT NOTCHED, STRANGE ALUM REAR HOUSING, JIG WELDED SWING ARM, UPPER LINKS, MOLY ROD ENDS HARDWAREJIG WELDED REAR HSG BRACKET, REAR SUSPENSION FRAME MOUNTS, ANTI ROLL BAR HARDWARE, FRONT MID PLATES FOR BIG BLOCK CHEVY, BOLT IN TRANS CROSSMEMBER, UPPER & LOWER FRONT STRUT MOUNTS, BLUE PRINT
SKU: 07-005
