Part#36-500
Unwelded, 108″ long, 45″ front of rail to bend, 62 1/2″ bend to back, 26″ outside for frame to outside of frame, frame rail drops 5″, track width adjustable
Front Frame Kits, S&W Made Parts
2″x3″ Strut Front Frame & Crossmember
Part# 36-500
SW’s strut front frame package is designed to simplify installation for the do-it-yourselfer.The base frame package features mandrel formed 2″ x 3″ frame rails, rear lower control arm mounts, a fully welded rack pinion crossmember with front lower control arm mounts and a front subframe support package to tie the frame rails to the roll cage. . Complete installation requires the use of an upper strut mounting kit. This kit can be used with any eye or stud mount Strange strut package.
Note: picture shows struts and rack installed
$316.85
| Weight | 83.22 lbs |
|---|---|
| Dimensions | 108 × 4 × 4 in |
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
Can this kit be purchased welded with brackets ready for trimming and install?.. Thank you
No we can't unless we build the car. You need to tie this into the rest of the car and have struts on a jig to know where to weld
Question by : Robert on Mar 23, 2020 02:40:05 PM
You may also like…
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-S-AET -
Front Frame Kits, S&W Made Parts
Round Tube Strut Front Frame Package – Mild Steel For Stud Mount Struts
Front Frame Kits, S&W Made PartsRound Tube Strut Front Frame Package – Mild Steel For Stud Mount Struts
Part# 36-501S
SW’s round tube strut front frame is designed to simplify installation for the do-it yourselfer. This frame package features 1-5/8″ mild steel frame rails, front sub frame supports, pre notched “k type” crossmember, rack pinion mount brackets, lower control arm mounts and upper strut mounts. Fits any Strange “stud mount” strut package
SKU: 36-501S -
Front Frame Kits, S&W Made Parts, Cage Upgrades & Funny Car Cages
Front Sub Frame Support Bars For A-Arm Suspension EWS
Front Frame Kits, S&W Made Parts, Cage Upgrades & Funny Car CagesFront Sub Frame Support Bars For A-Arm Suspension EWS
Part# 13-350
1 5/8″ x .134″ Mild Steel. Converts 10-point to 12-point, goes through firewall, Includes 2) 24″ long support tubes and 2) bents bars 46″ from end to bend, 65 degree bend, 17″ from bend to end.
SKU: 13-350 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-AET