Weight | 1 lbs |
---|---|
Dimensions | 0.1 × 0.1 × 0.1 in |
6 Point Dragster/Altered/Funny Car Cage to Customer Specifications
Part# 13-624 6-point dragster / altered / funny car cage to customer specification. 13-624 order form
$346.45
Product Q&A Ask a Question
Question Added Successfully
-
How do I send my measurements to add to the order? Thanks
You can email it to tomh@swracecars.com or fax to 610-948-7342 and include your contact information
Question by : justin.gravley on Mar 18, 2020 10:10:33 AM -
What bend radius is \"usual\" or standard on your custom 6 point cages? We\'re redoing an Altered and want to replace the cage with something a little more up to date rather than just add the tubes needed to cert. (current cage would look at home on a pulling tractor) I\'ve been working with Bend-Tech Software to get something that will fit and be more aesthetically pleasing, and will order a custom bent cage. thankful for you guys and hope things are going well! JB
Related products
-
Chassis & Blueprints, S&W Made Parts
21″ WIDE DRAGSTER SHOULDER HOOP, 1-PIECE
Part# 05-069-21
1-1/2″DIAMETER X 0.058 WALL CHROME MOLY, 1-PIECE WITH 2 BENDS FOR CHASSIS WITH ROLL CAGE LESS THAN 18″ TALL, 21″ WIDE AT BENDS, 30″ LONG. CUSTOMER REQUIRED TO MAKE 45 DEGREE CUTS AT ENDS
SKU: 05-069-21$129.42 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP$225.00 -
Chassis & Blueprints, S&W Made Parts
Helmet Tube Kit Chrome Moly
Part# 05-066
Helmet Tube Kit in Chrome Moly. For use with dragster funny car type roll cages or in door cars with chrome moly funny car cage kits. Includes two 1″ x .058 wall chrome moly tubes with 90 degree bend. One leg is 10″ the other is 19 3/4″. Must be TIG welded.
SKU: 05-066$67.05 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-F-AET$4,339.55 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001W-AET$3,047.45