T” Bolt adjuster for wheel height adjustment
Customer needs to cut and weld tubing to set width and length
Wheelie Bars, S&W Made Parts
Wheelie Bar Up To 60″ Long, Tubular, Spring Loaded, 3″ Axle Tube
Part# 40-337
60″ Maximum from center of axle to center of wheel, up to 26″ wide, spring loaded, upper and lower tubes 1″ x .095 chromoly-member 3/4″ x .058 chromoly, . Wheelie wheel bracket already welded to lower bar. Housing brackets for 3″ diameter tube
$316.85
| Weight | 30 lbs |
|---|---|
| Dimensions | 60 × 4 × 4 in |
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
Wondering if part #40-337 will fit on a 2006 Mustang GT? Thank you! Shane
the wheelie bars are universal, you may run into clearance issue with the stock gas tank
Question by : Shane on Jun 11, 2020 04:42:24 PM -
Would your 40-337 be correct for a 1966 Nova? The car is for bracket racing and possibly stock eliminator. Thanks J.P.
This would the bar we would recommend. Usually a 54" - 60" bar works best. We measure a wheelie bar from center of rear axle tube to wheelie wheelie mounting bolt. You can adjust the length of this bar up to 60" long
Question by : John Paliotti on Jun 22, 2020 04:38:13 PM
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET -
Wheelie Bars, S&W Made Parts
48″ Spring Loaded Leaf Style Wheelie Bar, For 3″ Housing Tube
Part# 40-304
48″ Long from rear axle center line , housing brackets fit 3″ axle tube . Tube is 1″ x .095 DOM tubing, aluminum leaf is 41-5/8″ long , 2″ wide, 1/4″ thick , center – center 20″, axle is 17-1/2″, long, T-bolt on ,bottom allows for height adjustment.
SKU: 40-304 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET
