| Weight | 2.7 lbs |
|---|---|
| Dimensions | 20 × 8 × 1 in |
Upper Control Arms, Lower Control Arms, S&W Made Parts
79-04 Mustang Control Arm Stiffening Kit
Part# 40-729
Perfect for the Mustang racer on a budget or for classes where replacing your control arms is not permitted. The SW stiffening kit simply welds to your factory control arm converting them into strong, fully boxed suspension members. Sold in a set which does 2 uppers and 2 lowers.
$54.05
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-S-AET -
Upper Control Arms, S&W Made Parts
2011 – 2014 Mustang Adjustable Street Upper Control Arm
Part# 40-717
2011 – 2014 Mustang Adjustable Street Upper Control Arm, SW Race Cars new fully adjustable upper control arm for the 2011 Mustang is engineered to allow adjustment of both the pinion angle and instant center. Energy Suspension polyurethane bushings make this kit a smooth quiet improvement that is perfect for high performance street use, A longer than stock upper link allows for smoother operation of the rear suspension through its travel. SW Race Cars fully adjustable upper control arm is 100% bolt on and requires no drilling or welding. Kit comes black powder coated and all necessary additional hardware is included. 40-717 instructions
SKU: 40-717 -
Lower Control Arms, S&W Made Parts
79-04 Mustang Weight Jacker Lower Control Arm
Part# 40-725
SW Race Cars new 79-04 Mustang weight jacker control arms are perfect for ET bracket and Stock Eliminator racing as well as high performance street use. Â Each set is custom fabricated and fully adjustable to allow the racer the ultimate in “tunability”. S&W’s unique spanner adjuster makes weight jacking quick easy. Â Each set of control arms includes its own tool set. These arms are a direct replacement for the factory control arm and include all necessary mounting hardware Powder coated for a long lasting, durable and attractive finish. Â Â – Does Not Accept Factory Sway Bars!
SKU: 40-725 -
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
 Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET
