| Weight | 10 lbs |
|---|---|
| Dimensions | 57 × 20 × 4 in |
S&W Made Parts, Spoilers, Spoilers
79-93 Mustang Coupe Aluminum Spoiler
Part#95-704
Specifically designed for the 79-93 Mustang coupe, SW’s aluminum spoiler comes with all necessary hardware and 2 spoiler support rods. Spoiler is 54 wide and extends 14″ off the back of the car. Also available in carbon fiber”
$293.75
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Part# 05-002-AET-BP
Assembly blueprint with cut list for 230″ wheelbase ADVANCED ET dragster with swing arm rear suspension. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-002-AET-BP -
S&W Made Parts, Spoilers, Spoilers
70-81 Camaro Rear Spoiler Kit
Part# 95-707
Bolt on, adjustable competition spoiler features chromoly deck support frame and support struts. 0.060″ Aluminum deck and spill plates. 58-3/4″ wide, deck extends 16″ past trunk lid. Spill plates are 18-1/2″ long, 9″ tall, 2-1/2″ above the deck
SKU: 95-707
