Weight | 40 lbs |
---|---|
Dimensions | 51 × 7 × 5 in |
82-02 Camaro / Firebird Adjustable Torque Arm Mild Steel – 9″ Ford Housing
Part# 40-617
Includes; Mild steel 40-601 torque arm , 40-618 rear torque arm mounting bracket, front mounting link, top & bottom mounting lugs for 9″ Ford housing, lateral link, mounting bracket and hardware. Black powder coated Customer required to weld lugs to rear housing (use 40-617-JIG). Requires S&W Race Cars frame connectors or after market crossmember
40-618 bracket install 40-601-1 instructions 40-601-2 instructions
$514.20
Product Q&A Ask a Question
Question Added Successfully
-
Interested in torque arm 40-617 I have a 9inch rear housing that the tabs are already welded on top and bottom and the location is center of housing will your torque arm work with the tabs in that position thank you
If you have our torque arm, you will need to get our housing bracket too. If it is not our torque arm, I don't think it will fit
Question by : Gerry on Aug 5, 2020 04:55:32 PM
Related products
-
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Adjustable Torque Arm for Through Bolt Type Housings
Adjustable Torque Arms, S&W Made Parts82-02 Camaro / Firebird Adjustable Torque Arm for Through Bolt Type Housings
Part# 40-601
SW Race Cars new 82-02 Camaro / Firebird torque arm, 47″ center line of rear axle to front mounting link. About 10″ shorter than stock. Designed to the same specifications as our own ” race bred” ladder bars. Made of high quality,1″ x .156″ wall DOM steel tubing, each torque arm is “direct threaded” for maximum strength. Also utilized at the rear of the torque arm are the same “race proven” rod ends and adjusters featured on SW”s ladder bars. Up front each torque arm features an Energy Suspension polyurethane bushing for quieter ride and limited driveline vibrations while insuring high strength and long life. SW Race Cars new 82-02 Camaro / Firebird torque arm must be used with an SW Race Cars, 82-92 Camaro / Firebird subframe connector crossmember kit, sold separately. All components are powder coated black for a long lasting, durable and attractive finish. NOTE! THIS TORQUE ARM IS FOR APPLICATIONS USING THROUGH-BOLT MOUNTING TO ATTACH THE TORQUE ARM TO THE FACTORY REAR HOUSING ONLY AND NEEDS SW FRAME CONNECTOR KIT . Applications using an aftermarket housing which utilizes 4 threaded mounting hole should used torque arm # 40-606
SKU: 40-601$340.40 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Part# 05-003W-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-S-AET$4,037.45 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001W-S-AET$3,540.35 -
Tools, Adjustable Torque Arms, S&W Made Parts
Torque Arm Set-Up Jig
Part# 40-617-JIG Used to locate mount torque arm rear housing brackets and link tab to 9″ ford rear housing. Jig can be rented and $200 will be refunded if jig shipping container is returned in good condition within 30 days. NOTE: Box to contain (1) Jig, (1) 7/16 X 2″ Bolt 65-038, (1) Set of instructions 40-617-JIG, return shipping label 40-617-JIG instructions
SKU: 40-617-JIG$323.13 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts245″ Dragster Kit – Solid Mount Fab Rear, 23″ Wide
Part# 05-003W-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49, INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-F-AET$4,339.55