Up front each torque arm features an Energy Suspension polyurethane bushing for quieter ride and limited driveline vibrations while insuring high strength and long life. SW Race Cars new 82-02 Camaro / Firebird torque arm must be used with an SW Race Cars, 82-92 Camaro / Firebird subframe connector crossmember kit, sold separately.
S&W Made Parts, Adjustable Torque Arms
82-02 Camaro / Firebird Torque Arm for Housings with 4 Threaded Mounting Holes
Part# 40-606
SW Race Cars new 82-02 Camaro / Firebird torque arm is designed to the same specifications as our own race bred ladder bars. Made of high quality, 1″x .156″ wall DOM steel tubing, each torque arm is direct threaded for maximum strength. Also utilized at the rear of the torque arm are the same race proven rod ends and adjusters featured on SW’s ladder bars. All components are powder coated black for a long lasting, durable and attractive finish.
Note : used for after market rear housings that utilize (4) 1/2″ threaded mounting holes to attach arm Applications using an stock housings or through bolt mounting should used torque arm # 40-601 or 40-601CM
$340.40
| Weight | 21.14 lbs |
|---|---|
| Dimensions | 51 × 7 × 5 in |
Upgrades
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP