Product Q&A Ask a Question
Question Added Successfully
-
What subframe connector does this work with?
Part# 40-601
SW Race Cars new 82-02 Camaro / Firebird torque arm is designed to the samespecifications as our own ³ race bred² ladder bars. Made of high quality,1² x .156² wall DOM steel tubing, each torque arm is “direct threaded” for maximum strength. Also utilized at the rear of the torque arm are the same ³race proven ³ rod ends and adjusters featured on SW¹s ladder bars. Up front each torque arm features an Energy Suspension polyurethane bushing for quieter ride and limited driveline vibrations while insuring high strength and long life. SW Race Cars new 82-02 Camaro / Firebird torque arm must be used with an SW Race Cars, 82-92 Camaro / Firebird subframe connector crossmember kit, sold separately. All components are powder coated black for a long lasting, durable and attractive finish. NOTE! THIS TORQUE ARM IS FOR APPLICATIONS USING THROUGH-BOLT MOUNTING TO ATTACH THE TORQUE ARM TO THE FACTORY REAR HOUSING ONLY AND NEEDS SW FRAME CONNECTOR KIT . Applications using an aftermarket housing which utilizes 4 threaded mounting hole should used torque arm # 40-606
40-601 page 1 instuctions 40-601- page 2 instructions
$340.40
Part# 05-003-F-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; DOMEX FAB REAR HOUSING WITH OLDS ENDS MOUNTING BRACKETS, SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES’s FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
Part# 40-617-JIG Used to locate mount torque arm rear housing brackets and link tab to 9″ ford rear housing. Jig can be rented and $200 will be refunded if jig shipping container is returned in good condition within 30 days. NOTE: Box to contain (1) Jig, (1) 7/16 X 2″ Bolt 65-038, (1) Set of instructions 40-617-JIG, return shipping label 40-617-JIG instructions
Part# 05-003W-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item