| Weight | 40 lbs |
|---|---|
| Dimensions | 51 × 7 × 5 in |
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro / Firebird Chromoly Adjustable Torque Arm -9″ Ford Housing
Part# 40-617CM
Includes; chromoly 40-601CM torque arm , 40-618 rear torque arm mounting bracket, front mounting link, top & bottom mounting lugs for 9″ Ford housing, lateral link, mounting bracket and hardware. Black powder coated Customer required to weld lugs to rear housing (use 40-617-JIG). Requires S&W Race Cars frame connectors or after market crossmember
40-618 instructions 40-601-2 instructions 40-601-1 instructions
$610.89
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP -
-
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Part# 05-003W-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49 REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 23″ SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-AET -
Adjustable Torque Arms, S&W Made Parts
82-02 Camaro/Firebird Adjustable Chrome Moly Torque Arm for Through Bolt Housings
Adjustable Torque Arms, S&W Made Parts82-02 Camaro/Firebird Adjustable Chrome Moly Torque Arm for Through Bolt Housings
Part# 40-601CM
SW Race Cars new 82-02 Camaro / Firebird chrome moly torque arm is made of high quality, 1-1/4″ x .095 and 1-3/8″ x .095 wall chrome moly steel tubing. ,47″ center line of rear axle to front mounting link. About 10″ shorter than stock. At the rear of the torque arm are the same “race proven” rod ends and adjusters featured on SW’s ladder bars. Up front each torque arm features an Energy Suspension polyurethane bushing for quieter ride and limited driveline vibrations while insuring high strength and long life. SW Race Cars new 82-02 Camaro / Firebird torque arm must be used with an SW Race Cars, 82-92 Camaro / Firebird subframe connector crossmember kit, sold separately. All components are powder coated silver for a long lasting, durable and attractive finish. NOTE! THIS TORQUE ARMS ARE FOR APPLICATIONS USING THROUGH-BOLT MOUNTING TO ATTACH THE TORQUE ARM TO THE REAR HOUSING ONLY AND NEEDS SW FRAME CONNECTOR KIT *Applications using an aftermarket housing which utilizes 4 threaded mounting hole should used torque arm # 40-606CM
SKU: 40-601CM
