Weight | 25 lbs |
---|---|
Dimensions | 51 × 12.250 × 6.75 in |
82-92 Camaro / Firebird Bolt On Chrome Moly Sub Frame Connectors
Part# 40-600CM
Designed to be 100% bolt on for your 82-92 Camaro / Firebird coupe (does not fit convertible), this kit requires no welding and can be installed using hand tools. This kit also clears all stock exhaust components while closely following the floor pan contour assuring you a close fit and maximum ground clearance. The included crossmember features a mount for SW adjustable torque arm which can be purchased separately and installed along with the subframe connectors and crossmember, or you can retain your O.E.M.torque arm and mount. The connectors and crossmember are fabricated from 1-1/2″ x .065″ wall chrome moly tubing and feature waterjet cut brackets for exact fit. These components are hand assembled on a custom welding fixture and TIG welded for high strength and ease of installation. All of the above components are powder coated silver for a long lasting, durable and attractive finish.
40-600 1of 3 instructions 40-600 3 of 3 instructions 40-600 2 of 3 instructions
$585.26
Product Q&A Ask a Question
Question Added Successfully
-
i have a 1984 z28 with a s&w bolt on subframe it has a trany cross frame but i can\'t find it on your site?
we currently do not offer a direct fit transmission crossmember for that car.
Question by : Steven on Jun 11, 2020 04:51:21 PM -
Will this kit fit onto a 1984 camaro RS. I find a lot of kits are made around the z28 i am not sure if those kits will fit my car.
This kit will fit. The body interior measurements are the same. The differences between models are are usually suspension, engine and exterior packages
Question by : Damian on Apr 18, 2022 09:53:08 AM -
Will this fit on my 1986 T-Top Firebird?
It will fit the car, but the there could be a clearance issue to access the handles to remove the t-top
Question by : Tom on May 15, 2023 05:00:23 PM
Vehicle Make and Model
Make and model of vehicles this part fits
Year | Make | Model |
---|---|---|
Year | Make | Model |
1982 - 1992 | Chevrolet | Camaro |
1982 - 1992 | Pontiac | Firebird |
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
200″ Front Engine Nostalgia Dragster Chassis Kit;
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts200″ Front Engine Nostalgia Dragster Chassis Kit;
Part# 05-004
200″ wheelbase, front engine dragster chassis kit. Perfect for nostalgia dragster racing. Meets SFI spec 2.4C 6.00 – 7.49. Kit includes all chrome moly tubing, cut, bent and notched (where possible). Jig welded front axle, 1/4″ Aluminum mid motor plate blank. Aluminum front motor plate blanks. 9″ Ford rear with Olds ends. Rear housing mounts. Anti-rotation device. Blue print. NOTE – this is a chrome moly kit and must be TIG welded.
NOTE: This is an Oversize Truck Freight Item
SKU: 05-004$3,387.18 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP$225.00 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001S-AET$4,444.39 -
Drive Shaft Loops, Driveshaft Loops, Bolt-In for OEM/Stock Applications
Driveshaft Loop 2010 Camaro Manual Trans
Drive Shaft Loops, Driveshaft Loops, Bolt-In for OEM/Stock ApplicationsDriveshaft Loop 2010 Camaro Manual Trans
Part# 14-62640
MOROSO 2010 NEWER CAMARO LS, LT SS w/STANDARD TRANSMISSION BOLT-ON DESIGN NO MODIFICATION REQUIRED, REMOVABLE LOOP FOR DRIVESHAFT REMOVAL, MEETS REQUIREMENT FOR ALL RACING SANCTIONING BODIES BLACK POWDER COATED, HARDWARE INCLUDED
SKU: 14-62640$149.86 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Part# 05-003W-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49 REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 23″ SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
SKU: 05-003W-AET$3,352.20