Up to 85″ long measured from axle center line to wheelie wheel center line
Includes double shear housing brackets. Customer to trim and fit
S&W Made Parts, Wheelie Bars
85″ Wheelie Bar Unwelded Kit With Quick Adjustments
Part# 40-384U
Up to 85″ long, 1-1/4 x 065 chromoly upper and lower strut bars , 1-1/8 x 058 chromoly X-member up to 28: wide. Wheelie wheel brackets already welded to lower strut. All other tubes need to be cut and fit for length and width. Top tube has right and left hand chromoly FK rod ends for quick adjustment, Includes housing brackets
$587.24
| Weight | 25 lbs |
|---|---|
| Dimensions | 76 × 9 × 9 in |
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET -
S&W Made Parts, Wheelie Bars
Wheelie Bar Up To 60″ Long, Tubular, Spring Loaded, 2 x 3 Back Brace
Part# 40-339
60″ Maximum from center of axle to center of wheel, up to 26″ wide, spring loaded, upper and lower tubes 1″ x .095 chromoly-member 3/4″ x .058 chromoly, . Wheelie wheel bracket already welded to lower bar. Housing brackets for 2 x 3 back brace 40-337 & 40-339 instructions
SKU: 40-339 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP
