Weight | 11 lbs |
---|---|
Dimensions | 15 × 3 × 3 in |
Adjustable CHromoly Lower Control Arms -GM F-Body & G-Body
Part# 40-623
Adjustable Chrome Moly Lower Control Arms 1-3/8″ x .095″ tubing. 3/4″ x 3/4″ chromoly rod ends Fits 82-03 Camaro, 78-88 Monte Carlo, Malibu, Regal, Grand Prix, Cutlass
$293.55
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET$3,540.35 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP$117.65 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 245″ Dragster Kit – For Solid Mount Fab Rear, No Rear Included
Part# 05-003W-AET
ADVANCED ET, MEETS SFI 2.5 6.00 – 7.49 REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4″ ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 23″ SHOULDER HOOP
SKU: 05-003W-AET$3,047.45 -
S&W Made Parts, GM A-Body & G-Body Bolt-on Parts, Lower Control Arms
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
S&W Made Parts, GM A-Body & G-Body Bolt-on Parts, Lower Control Arms82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Part# 40-602
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602$164.25