| Weight | 211 lbs |
|---|
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
$3,047.45
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
Top Fuel Front Engine Dragster Kit 225″ Wheel Base With Fabricated Rear Housing –
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny CarTop Fuel Front Engine Dragster Kit 225″ Wheel Base With Fabricated Rear Housing –
Part# 05-096FR
MEETS SFI CHASSIS SPEC 2.2, 5.99 SEC AND QUICKER23″ SHOULDER HOOP (INSIDE) DOUBLE fRAME RAIL A-ARM FRONT END DESIGN, INCLUDES; CHROME MOLY TUBING CUT, BENT NOTCHED, 1/4″ ALUMIUM MID PLATE,FRONT MOTOR MOUNT BLANKS, ANTI ROTATION DEVICE, 6-POINT ROLL CAGE (NOT NOTCHED), 9″ FORD FAB REAR with FLOATERS
SKU: 05-096FR -
S&W Made Parts, Dragster, Altered, & Funny Car
245″ Top Dragster Chassis Kit Adv ET Swing Arm
Part# 05-090W-AET
245″ wheelbase rear engine swing arm chassis kit with 23″ shoulder hoop. Cockpit meets SFI spec 2.5, 6.00-7.49 seconds. Kit is made out of chromoly tubing. The tubing is cut to length and notched. Roll cage requires fitting. Includes; Strange aluminum housing with welded swing arm brackets, swing arm, top links, torsion bar, shock mounts, mid plate & front motor mounts, king pin bosses, and hardware.
SKU: 05-090W-AET -
S&W Made Parts, Chassis Kits, Dragster, Altered, & Funny Car
125″ 4-Link Altered Chassis Kit
Part# 06-001
ALL CHROME MOLY TUBING PRE-CUT AND BENT
MOTOR PLATE BLANK, MOTOR MOUNTS,
4-LINK FRAME BRACKETS
FAB HOUSING INCLUDED, FILL & DRAIN, OLDS ENDS
NO SUSPENSION BRACKETS WELDED ON
CHROME MOLY 4-LINK TUBES & ROD ENDS
INCLUDES INTERIOR REINFORCING TUBES FOR ADVANCED ETSKU: 06-001 -
S&W Made Parts, Chassis & Blueprints, Blueprints
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear.  Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP
