| Weight | 34.3 lbs |
|---|---|
| Dimensions | 27 × 12 × 8 in |
Custom Fabricated, S&W Made Parts
Aluminum Dragster 9″ Ford Housing With S&W Plates Plates
Part# 45-000
Strange (#H1153) Aluminum housing 27″ wide with solid mounting spacer plates included for S&W applications
$908.00
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Custom Fabricated, S&W Made Parts
9″ Ford Rear Housing With Back Brace to Customer’s Specifications
Part# 45-469B
Custom 9″ ford housing with back brace for ladder bar or 4-link. Customer will need to fill out housing spec sheet. Housing ends, 4-link or ladder bar brackets, and shock mounts will all be welded on. Housing will have fill drain and center section mounting studs.
SKU: 45-469B -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET
