| Weight | 25 lbs |
|---|---|
| Dimensions | 51 × 7 × 5 in |
Adjustable Torque Arms, S&W Made Parts
Chrome Moly Torque Arm Kit For S&W Rear Housing 45-449 & 45-450
Part# 40-619CM
TORQUE-ARM MOUNTING BRACKETS FOR SW REAR HOUSINGS 45-449 45-450 INCLUDES CHROME MOLY TORQUE ARM, TORQUE ARM REAR MOUNTING BRACKET DIAGONAL LINK, POLY BUSHINGS HARDWARE
$585.26
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Part# 05-002-AET-BP
Assembly blueprint with cut list for 230″ wheelbase ADVANCED ET dragster with swing arm rear suspension. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-002-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
200″ Front Engine Nostalgia Dragster Chassis Kit;
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts200″ Front Engine Nostalgia Dragster Chassis Kit;
Part# 05-004
200″ wheelbase, front engine dragster chassis kit. Perfect for nostalgia dragster racing. Meets SFI spec 2.4C 6.00 – 7.49. Kit includes all chrome moly tubing, cut, bent and notched (where possible). Jig welded front axle, 1/4″ Aluminum mid motor plate blank. Aluminum front motor plate blanks. 9″ Ford rear with Olds ends. Rear housing mounts. Anti-rotation device. Blue print. NOTE – this is a chrome moly kit and must be TIG welded.
NOTE: This is an Oversize Truck Freight Item
SKU: 05-004 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001S-AET
