| Weight | 35 lbs |
|---|---|
| Dimensions | 8 × 40 × 8 in |
Custom Fabricated, S&W Made Parts
Fabricated 9″ Ford Mild Steel Housing With Brackets, Housing Ends & Back Brack
Part$ 45-052MS
SW’s new rear fabricated rear housing is perfect for drag race pro/street use. The mild steel center is 17″ wide with internal axle tube gussets for added strength and axle tube stability. The fabricated housing fits any 9″ Ford center with 3″ x .188 wall axle tubes and includes 4-link brackets, back-brace, shock mounts, customer choice of housing ends. Finished rear to fit any of the SW’s rear frame packages. SW can also build one to your specific specifications or application up to 72″ wide. Every housing features a filler, magnetic drain and vent. Priced as shown. Please contact our sale staff to place your order. custom order form
$2,513.65
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
Do you guy built custom rear from brakes to full floater street complete axle or could you build one ty jay coppo
We do build fab rears for street cars the rears with floaters. We carry Strange, Moser and Mark Williams product line
Question by : Jay on May 29, 2020 04:10:11 PM
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP -
Custom Fabricated, S&W Made Parts
Fabricated 9″ Ford Mild Steel Housing Bare With Housing Ends
Part# 45-050MS
The mild steel center is 17″ wide with internal axle tube gussets for added strength and axle tube stability. The fabricated housing fits any 9″ Ford center and is offered “bare” center with 3″ x .188 wall axle tubes finished rear up to 72″ wide with choice of housing end. Every housing features a filler, magnetic drain and vent. No brackets or back-brace.
SKU: 45-050MS
