| Weight | 47 lbs |
|---|---|
| Dimensions | 30 × 6 × 30 in |
S&W Made Parts, Engine Diapers
Dragster Belly Pan With Weld On Tabs
Part# 05-171
0.050 aluminum pan 18-1/2″ wide at front x 28″ long, 17-3/4″ wide at back. front height 4″, sides 4″, back 6″. kit includes (2) absorbant pads (05-071-03), tabs, buttons, button plates and springs. Fitting, trimming & welding required
$205.55
Upgrades
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-S-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
200″ Front Engine Nostalgia Dragster Chassis Kit
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts200″ Front Engine Nostalgia Dragster Chassis Kit
Part# 05-004
200″ wheelbase, front engine dragster chassis kit. Perfect for nostalgia dragster racing. Meets SFI spec 2.4C 6.00 – 7.49. Kit includes all chrome moly tubing, cut, bent and notched (where possible). Jig welded front axle, 1/4″ Aluminum mid motor plate blank. Aluminum front motor plate blanks. 9″ Ford rear with Olds ends. Rear housing mounts. Anti-rotation device. Blue print. NOTE – this is a chrome moly kit and must be TIG welded.
SKU: 05-004
