(CHEVELLE, GTO, 442, BUICK GS, ECT.)
Control Arms, GM A-Body & G-Body Bolt-on Parts
Fatman GM Front Control Arms 64-72 GM A-Body Stock Width
Part# 36-604
1964–1972 Chevrolet Chevelle GTECH Control Arms
Tested and quality proven GTECH 1964–1972 Chevrolet Chevelle control arms are available for your Chevelle. Each set of four comes complete with ball joints and urethane bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- Available in stock or 1” narrowed per side widths for tire clearance for fatter fires
- All new top quality ball joints installed
- Urethane bushings installed
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) supression
- Easy conversion to coilovers or air ride
$1,150.00
| Weight | 33 lbs |
|---|---|
| Dimensions | 15 × 11 × 20 in |
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
can I use original sway bar or is there a specific special one that goes with these control arms? I have a 1 1/4\" sway bar.
according to Fatman, the standard length sway bars will fit
Question by : Sierra on Jan 19, 2023 08:45:44 AM
Related products
-
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Chrome Moly Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Chrome Moly Lower Control Arms
Part# 40-602CM
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .083″ wall chrome moly steel tubing. High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated silver for a long lasting, durable and attractive finish. Also fits 78-82 Malibu and 78-88 Monte Carlo other GM G-bodies.
SKU: 40-602CM -
Control Arms, GM A-Body & G-Body Bolt-on Parts
QA-1 67 – 69 GM F-Body GM Front Upper Race Control Arms
Control Arms, GM A-Body & G-Body Bolt-on PartsQA-1 67 – 69 GM F-Body GM Front Upper Race Control Arms
Part# 36-52317
QA-1 #52317 GM F-BODY RACE FRONT UPPER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-168 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. LOWER BARS PURCHASED SEPARATELY)
SKU: 36-52917 -
Direct Fit/Bolt On, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
GM G-Body Adjustable Competition Upper Control Arm
Direct Fit/Bolt On, GM A-Body & G-Body Bolt-on Parts, S&W Made PartsGM G-Body Adjustable Competition Upper Control Arm
Part# 40-622
78-82 Malibu, 78-88 Monte Carlo upper control arms with hex adjuster for setting pinion angle, Chromoly rod end with steel spacers at front of link, aluminum bushings with steel sleeves replaces stock bushings on rear. Includes grade 8 bolts and black powder coated
SKU: 40-622 -
