1955 – 1957 Chevy
Fatman GM Front Control Arms 55-57 Chevy Stock Width
Part# 36-600
1955–1957 Chevrolet GTECH Control Arms Stock Witdh
Tested and quality proven GTECH 1955–1957 Chevrolet control arms are available for your Tri-5 Chevy. Each set of four comes complete with ball joints and OEM rubber bushings in primer to paint your choice of color.
- We’ve had thousands of our GTECH control arm sets installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- American made TIG welded construction for top quality
- 1” x .188 wall tubing for maximum strength with minimum bulk
- Available in stock or 1-½” narrowed per side widths for tire clearance for fatter fires
- All new top quality ball joints installed
- OEM rubber bushings supplied (to be installed on your original shafts) to maintain insulation from road shock. We feel that urethane bushings in this application are too harsh for decent ride quality
- Stock coil springs mount on a urethane lower spring insulator for NVH (Noise Vibration Harshness) suppression
- Easy conversion to coilovers or air ride
$1,150.00
Weight | 33 lbs |
---|---|
Dimensions | 15 × 11 × 20 in |
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
GM A-Body & G-Body Bolt-on Parts
QA-1 Drag Racing Kit Level 1 1968-1972 GM A-Body
Part#DK21-GMA2
QA-1 Drag Racing Kit Level 1 1968-1972 GM A-Body For small block and LS engines, Kit Includes:(2) Front “R” Series Stocker Star Shocks – TR505 (2) Rear Single Adjustable Stocker Star Shocks – TS801 Rear Sway Bar – 52871, Boxed Lower Trailing Arms – 5205, Adjustable Upper Trailing Arms – 5248, Trailing Arm Braces – 5212, Anti-Hop Bars – 5213
SKU: DK21-GMA2$2,195.01 -
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Part# 40-602
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602$180.68 -
Control Arms, GM A-Body & G-Body Bolt-on Parts
QA-1 78 – 88 G-Body GM Front Lower Race Control Arms
Part# 35-52364
QA-1 #52364, GM G-BODY RACE FRONT LOWER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-168 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. UPPER BARS PURCHASED SEPARATELY)
SKU: 36-52964$848.95 -
GM A-Body & G-Body Bolt-on Parts, Components, Front
S-10 Or G-Body 4 Piston Front DragBrake
Part# 55-AC245
G-BODY S-10, includes Billet Aluminum 4 Piston Calipers, Billet Aluminum Mounting Brackets, Grade 8 Hardware, Billet Aluminum Hubs with screw on dust caps, Bearings and Seals, Brake Pads, 10 1/4” Diameter Drilled Rotors, 1/2″ Studs, 3″ long
SKU: 55-AC-245$870.00