67 – 69 Camaro
Fatman GM Front Control Arms 67 – 69 Chevy Camaro Stock Width
Part# 36-606
1967 – 1969 Chevy Camaro Control Arms GTECH
Tested and Quality Proven GTECH 1967 – 1969 Chevy Camaro Control Arms are available for your Chevy. Each set of four comes complete with Ball Joints, Shafts and Bushings in primer to paint your choice of color. Optional Black or Silver powder coating available for GTECH 1967 – 1969 Chevy Camaro Control Arms for an additional fee.
- Thousands of our GTECH control arm sets have been installed since 1991
- Optimized geometry for modern radial tires and hot rod brakes
- Optimized upper ball joint position allows more positive caster for better handling without huge shim stacks
- Urethane upper and lower bushings for control
- American made TIG welded construction for top quality
- 1” x .188″ wall DOM tubing for maximum strength with minimum bulk
- Available in stock or 1 ½” narrowed (per side) widths for clearance for fatter tires and subframed hot rods
- All new top quality ball joints installed
- Stamped 3/16” lower spring cup mounts a urethane lower spring insulator for NVH suppression (Noise Vibration Harshness)
- Standard length arms have sway bar tabs installed (narrowed arms will require modification to the sway bar and its mounts)
- Easy conversion to coilovers or air ride
$1,150.00
Weight | 33 lbs |
---|---|
Dimensions | 15 × 11 × 20 in |
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
Control Arms, GM A-Body & G-Body Bolt-on Parts
GM FRONT UPPER RACE CONTROL ARMS 64 – 72 A-BODY (CHEVELLE,GTO,442,BUICK GS, ECT)
Control Arms, GM A-Body & G-Body Bolt-on PartsGM FRONT UPPER RACE CONTROL ARMS 64 – 72 A-BODY (CHEVELLE,GTO,442,BUICK GS, ECT)
Part# 36-52322
QA-1 #52322, GM A-BODY RACE FRONT UPPER CONTROL ARMS UTILIZE A QA-1 LOW FRICTION BALL JOINT AND LOW FRICTION PIVOT BUSHINGS. ALL UPPER ARMS FEATURE OFF-SET CROSS SHAFT , LETTING YOU QUICKLY AND EASILY ADJUST CAMBER. A BOLT-IN SPRING ADAPTER 7720-168 IS AVAILABLE TO ALLOW THE USE OF STOCK SPRINGS. (NOTE: PICTURE SHOWS UPPER AND LOWER BARS. LOWER BARS PURCHASED SEPARATELY)
SKU: 36-52322$591.95 -
GM A-Body & G-Body Bolt-on Parts, Strange
Strange Chevelle/ Malibu/ Nova Double Adj Rear Shock
Part# 50-S5064STRANGE #S5064 OEM REAR DOUBLE ADJUSTABLE SHOCK – CHEVELLE/MALIBU, CHEVELLE 64-67, MALIBU 68-83, IMPALA 58-96, MONTE CARLO 70-88, NOVA 68-79, , 13.50″ Compressed / 20.875″ Extended
SKU: 50-S5064$260.00 -
Direct Fit/Bolt On, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
GM G-Body Adjustable Street Upper Control Arm
Direct Fit/Bolt On, GM A-Body & G-Body Bolt-on Parts, S&W Made PartsGM G-Body Adjustable Street Upper Control Arm
Part# 40-621
Fits 78-82 Mailbu, 78-88 Monte Carlo, replaces stock upper control arms (2) piece adjustable link, front has poly bushings, black powder coated, grade 8 hardware, Energy Suspension bushings included
SKU: 40-621$322.91 -
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts
82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Lower Control Arms, GM A-Body & G-Body Bolt-on Parts, S&W Made Parts82-02 Camaro / Firebird & 78-82 Malibu / 78-88 Monte Carlo Lower Control Arms
Part# 40-602
Designed to withstand the rigors of weekly bracket racing, without sacrificing ride quality SW Race Cars new 82-02 Camaro / Firebird lower control arms are custom fabricated from super strong, 1-5/8″ x .134″ wall steel tubing (the same tubing that is standard in SW Race Cars¹ 10 point roll cages). High quality, Energy Suspension polyurethane bushings are installed in both ends to retain ride quality and eliminate bushing movement. These arms are a direct replacement for the factory control arm and install using the O.E.M. hardware. Powder coated for a long lasting, durable and attractive finish.Kit also fits 78-82 Malibu 78-88 Monte Carlo
SKU: 40-602$180.68