Front hoop, outside vertical and horizontal helmet tubes are 1-5/8 x .134 Mild Steel
Back, side, kidney, and cage support tubes are 1-1/2 x .120 Mild Steel
Helmet tubes are 1″ x .095 Mild Steel
S&W Made Parts, Cage Upgrades & Funny Car Cages
Funny Car Cage Kit For Door Car Mild Steel
Part# 13-362
S&W Race Cars funny car cage conversion kit includes all tubing necessary to upgrade your existing roll cage to the latest in doorslammer cages. This kit can be easily installed in virtually any existing roll cage or doorslammer tube chassis. The tubing is left long so that it can be cut to fit exactly to your chassis. Funny car cage conversion kit is in mild steel.
$176.95
| Weight | 103 lbs |
|---|
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
Do you have any photos of this product? Is the upper bars level with the side bar or are they higher then have a short sweep into the side bar. i am unable to determine this from the photo. I need to extra height over the helmet. Im looking for the over the head bars to be at the same height as the main hoop.
The kit is a universal kit. The roll cage instruction sheet shows the funny car cage tubing layout. It is installed based on driver position
Question by : Jeff on Apr 1, 2020 04:53:44 PM -
Hello. I have an existing 10 point roll cage for 93 civic hatchback. Will this kit works? Thanks
The funny car cage is an universal kit that will work with ant 10-point roll cage. You will need to trim to fit
Question by : Eric on Jul 8, 2020 08:16:36 AM -
im looking to order Part# 13-362 what are my shipping options to Hawaii 96732
Usually we ship FedEx Express to Hawaii, a funny car cage would be about $185 shipping
Question by : shannon on Jul 24, 2020 10:53:31 AM -
Is it possible to get this for a 99 honda civic sedan right hand drive.
The funny car kit is universal. We can build one for a right hand steer
Question by : Aldon Frederick on Aug 27, 2020 01:46:25 PM
Related products
-
-
S&W Made Parts, Cage Upgrades & Funny Car Cages
Funny Car Cage Kit For Door Car Chromoly
Part# 13-363
S&W Race Cars funny car cage conversion kit includes all tubing necessary to upgrade your existing roll cage to the latest in doorslammer cages. This kit can be easily installed in virtually any existing roll cage or doorslammer tube chassis. The tubing is left long so that it can be cut to fit exactly to your chassis. Funny car cage conversion is made in chromoly tubing.
SKU: 13-363 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
S&W Made Parts, Cage Upgrades & Funny Car Cages
Sportsman Roll Cage Upgrade Kit EWS
Part# 13-349
Kit will upgrade existing 10pt into a 14pt. Tubing is 1 5/8″ x .134 wall EWS mild steel. Includes front subframe supports, two rocker bars, two door X-braces, and behind driver X-brace. Rocker bars come 72″ with one end notched.
SKU: 13-349
